• 대한화학회지
• /
• 제24권5호
• /
• pp.398-403
• /
• 1980

4,4'-azobis-[4-cyano valeric acid]를 개시제로 하여 라디칼 중합에 의해 carboxyl-terminated polybutadiene을 제조하고, 개시제의 농도가 중합체의 물성에 미치는 영향을 조사하였다. 부타디엔 농도를 일정하게 유지하고, 개시제 농도를 변화시켜 중합한 결과, 개시제농도가 증가함에 따라 카르복실기 함량이 감소하고 중합수율은 개시제농도의 1/2 제곱에 정비례하였으며, 관능도가 2.0을넘어 일반적인 라디칼 중합의 경향과 일치하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.1-5
• /
• 2018

In this study, we designed and synthesized novel thermal radical initiators of BTAP (1-phenyl-3,3-dipropyltriazene), BTACP (1-(phenyldiazenyl)pyrrolidine), BTACH (1-(phenyldiazenyl)piperidine), and BTACH7 (1-(phenyldiazenyl)azepane) based on a triazene moiety to provide a thermal initiator for radical polymerization. The synthetic method is valuable due to the simplicity. In addition, the synthesized thermal initiator did not affect the color of the polymer. Among the four initiators, the polymerization time for the BTACH of the 6-membered ring decreased by 67%, as opposed to the polymerization time without initiator. Conversion after polymerization was over 92%. DSC experiments also showed that the initiator with hexagonal rings had the lowest peak polymerization temperature of $160^{\circ}C$. Our study suggests a promising new initiator system that is effective for radical polymerization.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.213-218
• /
• 2004

We have performed dispersion polymerization of acrylamide in tert-butyl alcohol/water mixture-using hydroxypropyl cellulose and ammonium persulfate as the stabilizer and the initiator, respectively - to study the effects that the concentration of monomer, initiator, and stabilizer, the tert-butyl alcohol/water ratios as polymerization media, and the reaction temperature have on, among other things, the polymerization kinetics, particle sizes, and molecular weights. The polymerization rate increased upon increasing the concentration of the monomer, initiator, and stabilizer, the water content in the tert-butyl alcohol/water media, and the polymerization temperature. The average particle size of the lattices increased upon increasing the concentration of initiator, the polymerization temperature, and the water content in the tert-butyl alcohol/water media, but it decreased upon increasing the concentration of monomer and stabilizer. The viscosity-average molecular weight increased upon increasing the concentration of monomer and stabilizer and the water content in the tert-butyl alcohol/water media, but it decreased upon increasing both the concentration of initiator and the polymerization temperature.

• Macromolecular Research
• /
• 제15권4호
• /
• pp.324-329
• /
• 2007

An octa-functional alkoxyamine initiator, with the 2,2,6,6-tetramethyl-l-piperidinyloxy (TEMPO) free radical, was synthesized based on resorcinarene, with its efficiency to initiate the nitroxide-mediated free radical copolymerization of styrene and methyl methacrylate (MMA) described. A difunctional analogue of this initiator was also synthesized, using resorcinol as the core molecule. The structures of the resulting initiators were confirmed by homolysis studies based on electron spin resonance spectroscopy and molecular modeling. The polymerization behavior and characteristics of the polymers obtained using these two initiators were also compared. Well-defined star-shaped and linear random copolymers, with low polydispersities and controlled molecular weights, were prepared. The efficiencies of these initiators towards copolymerization, as well as the parameters permitting the formation of well-defined polymers, were also investigated. The reactivity ratios were $r_a=0.42(a=styrene)\;and\;r_b=0.33(b=MMA)$ for the octa-functional initiator system and $r_a=0.45\;and\;r_b=0.39$ for the difunctional initiator system.

• 한국추진공학회지
• /
• 제24권2호
• /
• pp.43-51
• /
• 2020

고폭화약을 이용한 격벽형 착화기를 가속노화 후 성능시험을 수행하여 노화특성을 확인하였다. 격벽형 착화기는 마이크로 착화기에서 발생한 충격파가 격벽을 통해 엑셉터 화약과 점화 화약에 전달되어 동작한다. 제품에 대한 수명평가를 위해 수명연한에 따른 가속노화 조건을 설정하고, 매 주기마다 시료에 대한 점화 성능을 10cc 밀폐용기 시험을 통해 작동지연시간과 최대압력을 측정하여 요구규격 만족여부를 확인하였고, 분산분석을 통해 노화여부를 판단하였다.

• Elastomers and Composites
• /
• 제14권1호
• /
• pp.7-12
• /
• 1979

Graft copolymerization of methlymethacrylate(MMA) onto sodium alginate(SA) aqueous solution by sodium metaperiodate$(NaIO_4)$ as an initiator was carried out with the variation of the reaction time, the reaction temperature and the concentrations of initiator and monomer. The results obtained were as follows: 1. SA was easily separated from the reaction mixture of homopolymer, graft polymer and sodium alginate ungrafted by the treatment of concentrated boiling $Na_3PO_4$, solution with the small amount of $Na_2SO_3$ to the mixture and then isolated as the acid form by acidifying the salts solution containing SA. 2. The amount of graft polymer was larger than that of homopolymer below $70^{\circ}C$ whereas above $70^{\circ}C$ the amount of homopolymer was larger. 3. The sum of each amount of graft polymer ana homopolymer was always increased with increase of the reaction time, the reaction temperature and the concentrations of initiator and monomer. 4. With increase of the concentration of initiator, the graft efficiency was increased below $70^{\circ}C$ while decreased above $70^{\circ}C$. 5. Graft copolymerization of MMA onto SA in aqueous solution was carried out without initiator.

• Composites Research
• /
• 제34권3호
• /
• pp.180-185
• /
• 2021

기존 아민계 경화제를 사용해 액정 에폭시를 경화할 경우, 랜덤 한 3차원 네트워크 구조의 생성으로 인해 phonon의 산란이 많이 발생하기 때문에 열전도도가 낮게 나타났다. 이러한 문제를 mesogen그룹을 적층된 구조로 형성하는 양이온 개시제를 이용하여 해결하기 위해 본 연구에서는 아민계 경화제와 양이온 개시제를 사용한 에폭시의 TGA분석(Thermogravimetric Analysis)을 통해 등온 열분해 활성화에너지를 조사하여 열적안정성을 비교하였다. 양이온 개시제를 이용한 에폭시의 경우 활성화가 에너지가 높았으며 기존 실험과 비교했을 때, 열적안정성은 열전도도와 비슷한 양상을 보인다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.337-337
• /
• 2006

The synthesis of an octafunctional resorcinarene based initiator for nitroxide mediated polymerization and its ability to yield random star copolymers of styrene and methyl methacrylate is studied. The effect of the initiator conformations towards its activity and the conditions that permit the formation of well-defined star block copolymers is also investigated in detail. The characterization of the initiator and the polymers were carried out by various spectro-analytical techniques. Well-defined random copolymers were obtained with controlled molecular weight and low PDI depending on the monomer feed.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2281-2284
• /
• 2014

Polystyrene beads (PS beads) with narrow size distribution were synthesized, and their diameter was controlled from 1.2 to $5{\mu}m$ by varying the injection rate of a styrene solution containing initiator and the concentration of reactant, such as initiator and capping material. The diameter of the PS beads increased with increasing in the injection rates and the initiator concentration or decreasing the capping material concentration. Then, we used the PS beads as building block, and organized them into a hexagonally close-packed monolayer on substrate with template-assisted manual assembly. We showed perfect hexagonally close-packed organization of the PS beads with various sizes in large-scale area. And we demonstrated the superiority of the dry manual assembly over the wet self-assembly in terms of simplicity, speed, perfect ordering, and large scale.

• Macromolecular Research
• /
• 제10권3호
• /
• pp.140-144
• /
• 2002

Dispersion polymerization of acrylamide was carried out in the media of methyl alcohol/$H_2O$ mixtures using hydroxypropyl cellulose and ammonium persulfate as steric stabilizer and initiator, respectively. The effects of concentrations of initiator and steric stabilizer, amount of monomer, polymerization temperature, methyl alcohol/$H_2O$ ratio, and purification of monomer and nitrogen purge on the particle size of the latices and molecular weight of the polymers were investigated. The average particle diameter increased with increasing concentration of initiator, water content in methyl alcohol/$H_2O$ media, and polymerization temperature, but decreased with monomer and stabilizer concentrations. The viscosity average molecular weight increased with increasing concentrations of monomer, steric stabilizer, and water content in dispersion media, but decreased with initiator concentration and polymerization temperature. The PAM polymers prepared with the purified monomer and the nitrogen purging before the reaction showed the highest molecular weight.