• 대한수학회보
• /
• 제39권2호
• /
• pp.347-357
• /
• 2002

In this paper, we study the concepts of isocompactness and cl-isocompactness. We generalize a pure space defined by Arhangelskii and get some results on initially K-compact spaces. We also consider open problems related to isocompactness and cl-isocompactness.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.263-266
• /
• 2013

A novel compact and low-loss VHF bandpass filter is presented with enhanced stopband performance using metamaterial zeroth order resonator (ZOR) characteristics. An in-line ZOR filter is initially suggested and changed to have transmission zeros (TZs) due to source-load coupling for effective improvement of the isolation from UHF wireless channels. The proposed filter is smaller than 1/10 of the conventional filters in terms of size and has relatively very low insertion loss (< 1 dB for the electromagnetic (EM) simulation and < 3 dB for the measurement) and return loss (<-20 dB) in the passband due to the approximately 80% size reduction and the higher isolation in the stopband due to the TZs. The circuit and EM simulation are in good agreement with the measurements.

• Korean Chemical Engineering Research
• /
• 제52권5호
• /
• pp.652-656
• /
• 2014

소형형광등(Compact fluorescent Lamp; CFL) 3종류를 파쇄할 때 발생하는 수은의 기상농도와 대기로 방출되는 수은 양을 평가하였다. CFL 파쇄 시 배출되는 수은 농도는 초기에 매우 급격하게 감소되었으나 24시간 이후에는 수은농도의 변화가 점차 작아졌으며, 이 후 42시간까지 일정 농도를 유지되었다. 이러한 일정한 농도를 안정화 농도(Stabilized concentration)로 나타내었고 안정화 농도는 기체상 수은이 거의 배출되어 파쇄장치에 잔류하는 액체상 수은이 온도와 기압에 의한 영향으로 기화되어 배출되는 것으로 판단되었다. 소형형광등에서 발생되는 수은농도는 회사별로 A사 < B사 < C사 순으로 나타났으며, 회사별로 수은의 안정화 농도와 안정화 시간은 A사 < B사 < C사 순으로 높았다. 공기유량이 증가함에 따라 수은 부분압은 감소하였으며, 이는 대기 중 수은의 양이 낮아짐을 의미하고 안정화 농도도 감소하는 것으로 나타났다. CFL 파쇄 시 초기의 수은 농도는 공기유량에 관계없이 $0.1mg/m^3$인 지정시설의 환경기준보다 매우 높으므로 소형형광등을 파쇄할 때 기상의 수은을 관리하는 것이 절대적으로 필요하다.

• Wind and Structures
• /
• 제1권4호
• /
• pp.317-336
• /
• 1998

In this paper the appraisal of a folding dome structure under the influence of wind loading is discussed. The foldable structure considered is constructed from an assembly of interconnected elements, together with a flexible membrane, all of which are initially store in a compact form and on deployment expand, like an umbrella, into a dome structure. Loading on the dome was obtained from a wind tunnel analysis of the pressure distribution over the roof of a 1:10 scale model of the structure. The critical loading obtained from the wind tunnel investigation was used, together with individual member and material tests, to form a series of numerical non-linear finite element models which were, in turn, used to investigate the forces within the structure. The numerical analysis was used to determine the critical wind loading that the structure can sustain, as well as providing a method by which to investigate the failure modes of the structure. In order to enhance the load carrying capacity of the dome it was found that both the strength and stiffness of the structural nodes needed to be enhanced and in addition, changes were necessary to substantially increase the stiffness of the individual member and caps.

• Journal of Electrochemical Science and Technology
• /
• 제5권3호
• /
• pp.87-93
• /
• 2014

The fluorine-substituted $0.3Li_2MnO_3{\cdot}0.7Li[Mn_{0.60}Ni_{0.25}Co_{0.15}]O_{2-x}F_x$ cathode materials were synthesized by using the transition metal precursor, $LiOH{\cdot}H_2O$ and LiF. This was to facilitate the movement of lithium ions by forming more compact SEI layer and to reduce the dissolution of transition metals. The $0.3Li_2MnO_3{\cdot}0.7Li[Mn_{0.60}Ni_{0.25}Co_{0.15}]O_{2-x}F_x$ cathode material was sphere-shaped and each secondary particle had $10{\sim}15{\mu}m$ in size. The fluorine-substituted cathodes initially delivered low discharge capacity, but it gradually increased until 50th charge-discharge cycles. These results indicated that fluorine substitution gave positive effects on the structural stabilization and resistance reduction in materials.

• The Plant Pathology Journal
• /
• 제17권2호
• /
• pp.94-100
• /
• 2001

Roots of Chinese cabbage (Brassica campestris var. chinensis) seedlings infected with Plasmodiophora brassicae were examined by light and electron microscopy to reveal histopathological changes related to pathogenesis in the susceptible host. The pathogen colonized the cortex and partly the stele as well, invading up to the xylem. Gall tissues could be differentiated from the initially infected tissues, involving less compact organization and new vascular development. The infected cells were much hypertrophied, and contained one to several plasmodia. Except cellular hypertrophy, no pathological ultrastructural modification was noted in the infected calls. Infected cytoplasm became dense with ground cytoplasm, inconspicuous central vacuole, and increased cellular organelles such as mitochondria and dictyosomes. There were two types of nuclear states of plasmodium, uninucleate and multinucleate. Both plasmodia were structurally similar, filled with lipid droplets, bounded with envelope, and containing mitochondria, endo-plasmic reticulum, and sometimes small vacuoles. Plasmodial fragmentation, which may be regarded as a way to discharge plasmodial materials into host cytoplasm, commonly occurred, forming plasmodial fragments by outgrowth of plasmodial cytoplasm and regional compartmentalization. Plasmodial fragments were degenerated sometimes followed by forming chains of spherical vesicles especially in the uninucleate plasmodial state. These ultrastructural features indicate the biotrophic nature of the pathogen associated with its pathogenesis in the susceptible host.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권4호
• /
• pp.398-403
• /
• 1998

The objective of the present study was to examine the developmental rates, and the stage of development in relation to time since fertilization, of in vitro produced buffalo embryos. Buffalo cumulus-oocyte complexes obtained from slaughterhouse ovaries were matured and fertilized in vitro. The fertilized oocytes (n = 248) were then co-cultured with buffalo oviductal epithelial cells and evaluated for the developmental stages on Days 2, 4, 6, 7, 8, 9 and 10 post-insemination. The peak of 4-cell stage embryos was observed on Day 2 (63.7 %), whereas Day 4 was marked by peaks of 6-8-cell stage embryos (20.9%) and 16-cell stage embryos to early morulae (50%). On Days 6, 7, 8, 9, and 10 post-insemination, 49.5, 48.3, 38.3, 33.8 and 33.4% embryos were found to be at morula/compact morula stages, 8.8, 12.5, 25.4, 6.0 and 1.2% at early blastocyst/blastocyst stages, 0, 6.8, 7.2, 15.3 and 2.0% at expanded blastocyst stage and 0, 1.6, 4.8, 19.3 and 38.5% hatching/hatched blastocyst stages, respectively. The peaks of early blastocyst/blastocyst, expanded blastocyst and hatching/hatched blastocyst stages were observed on Days 8, 9 and 10, respectively. The percentages of oocytes which initially became arrested and subsequently degenerated were 3.6, 4.8, 10.4, 14.5, 21.3 and 24.5% on Days 4, 6, 7, 8, 9 and 10 post-insemination, respectively.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.493-498
• /
• 1998

인쇄 및 소결법으로 제조한 Te-rich CdTe 소스를 근접 승화시켜 CdTe막을 Cd 기판 위에 증착하였다. 기판온도, 태양전지의 유효면적, 그리고 CdTD막과 ITO막의 두께를 변화시켜 CdTe 박막제조한 후 CdS/CdTe 태양전지의 광전압 특성을 연구하였다. 최적기판온도와 CdTe 두께는 각각 $600^{\circ}C$와 5-6${\mu}m$이다. 근접승화 동안 기판온도를 변화시키는 경우는 Cds와 접합부에 CdTe의 입자크기를 증가시키기 위하여 CdTe 증착초기에 기판온도를 62$0^{\circ}C$로 유지한 후, 이로 인해 발생될수 있는 핀홀을 줄이기 위하여 $540^{\circ}C$로 낮게 기판의 온도를 떨어뜨린후 기존의 막질을 유지하기 위하여 추가적으로 $620^{\circ}C$에서 어닐링 시키는 "two-wave"온도 곡선을 사용하였을 때 단락전류밀도가 증가하였다. CdTe 막의 두께가 $6\mu\textrm{m}$보다 커지면 CdTe 의 벌크 저항이 커져 태양전지의 피라미터를 감소시켰다. 이때 CdTe 막의 비저항은 3$\times$$10^{4}$$\Omega$cm이었다. 태양전지의 유효면적이 증가함에 따라, 개방 전압은 일정하나 ITO면저항의 증가에 의해 단락 전류밀도와 충실도가 감소하였다. 본 연구에 ITO의 최적 두께는 300-450nm 이었다. 유효면적 0.5$\textrm{cm}^2$에서 9.4%의 효율을 얻을수 있었으며 충실도와 효율 증가를 위해서는 직결저항의 감소가 필수적임을 알았다.