• 제목/요약/키워드: initial phase treatment

검색결과 256건 처리시간 0.029초

Phase and microstructure evolution during the TFA-MOD process of YBCO films

  • Wee, Sung-Hun;Shin, Geo-Myung;Hong, Gye-Won;Yoo, Sang-Im
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제9권2호
    • /
    • pp.19-22
    • /
    • 2007
  • We report the phase and microstructure evolutions of metal trifluoroacetate (TFA) precursor films in the TFA-MOD process of YBCO films on the LAO (100) substrates. It was confirmed that the precursor films were decomposed into $Y_2O_3$, $BaF_2$, and CuO nanoparticles after the initial heat treatment up to 400$^{\circ}C$. After a subsequent heat treatment at higher temperatures ranging from 700 to 850$^{\circ}C$ for 2 h, these nano-sized phases are converted into YBCO films. High Jc(77K, sf)-YBCO thin films (over 2 MA/$cm^2$) were successfully fabricated with firing temperatures ranging from 775 to 850$^{\circ}C$ for 2 h, where films were composed of dense microstructures with large grains.

Effects of Dietary Lysine and Energy Levels on Growth Performance and Apparent Total Tract Digestibility of Nutrients in Weanling Pigs

  • Kim, Y.W.;Ingale, S.L.;Kim, J.S.;Kim, K.H.;Chae, B.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제24권9호
    • /
    • pp.1256-1267
    • /
    • 2011
  • Two experiments were conducted to determine the effects of dietary lysine and energy level on performance and apparent total tract digestibility (ATTD) of nutrients in weanling pigs. In Exp. 1, a total of 288 weaned pigs (initial BW $5.77{\pm}0.85\;kg$) were randomly allotted to 4 treatments (4 replicates per treatment with 18 pigs in each replicate). Experimental diets were fed in the 3 phases: phase I (d 0 to 7), phase II (d 8 to 14) and phase III (d 15 to 28). Isocalorific diets (3,450 kcal/kg) with incremental lysine levels (Phase I: 1.51, 1.61, 1.71 and 1.81; Phase II: 1.35, 1.46, 1.56 and 1.66; Phase III: 1.18, 1.28, 1.39 and 1.49% lysine respectively for T1, T2, T3 and T4) were used as treatments. An increase in the dietary lysine levels linearly improved (p<0.05) the ADG and G:F during phases I, II and III as well as overall study period. The ATTD of DM (d 7 and 28) and CP (d 7, 14 and 28) were linearly improved (p<0.05) with increasing dietary lysine levels. ATTD of ash, Ca and P were not affected by dietary lysine level. In Exp. 2, 64 weanling pigs (initial BW $4.79{\pm}0.79\;kg$) were randomly allotted to 4 treatments (4 replicates per treatment with 4 pigs in each replicate) in a $2{\times}2$ factorial arrangement on the basis of BW. Effects of two levels of energy (high, 3,450 or low, 3,350 kcal/kg) and lysine (high or low; 1.70 or 1.50, 1.55 or 1.35 and 1.40 or 1.20% in phase I, II and III diets, respectively) on performance and ATTD of nutrients were investigated. High energy and lysine diets improved ADG (p<0.05) in pigs during phase I, II and III and overall period (p<0.001), while G:F increased (p<0.05) during phase I and overall period. Pigs fed high lysine diets consumed more (p<0.05) feed during phase III and overall period. Additionally, pigs fed high energy diets had greater (p<0.05) ATTD of GE (d 7 and 14), CP (d 7 and 28) and DM (d 28); whereas, pigs fed high lysine diets had greater (p<0.05) ATTD of GE and CP during d 7, 14 and 28. ATTD of ash, Ca and P remained unaffected (p>0.05) by dietary energy and lysine level. However, there was no energy${\times}$lysine interaction for any of the measured variables. Results obtained in present study suggested that high energy and lysine level improve the growth performance and ATTD of nutrients in weanling pigs.

하수처리장 실적데이터베이스를 활용한 유지관리비용 예측 (Estimating Maintenance Cost by Actual Database Based on Operation in Sewage Treatment Plant)

  • 이태식;곽동구
    • 한국산학기술학회논문지
    • /
    • 제10권10호
    • /
    • pp.2803-2809
    • /
    • 2009
  • 국내 건설업계는 자체 엔지니어링 기술 확보 및 높은 수준의 건설사업 관리기술의 보유와 더불어 사업초기 단계에서 해당 프로젝트의 경제적 타당성 평가를 수행할 수 있는 능력이 절실히 요구되어진다. 시설물의 설계 및 시공 기술은 최근의 국제 시장에서 수주를 위해서는 반드시 필요한 부분이며 수익을 창출할 수 있는 사업수행을 위해서는 사업초기단계부터 사후유지관리까지의 연속적인 건설사업 관리기술이 요구되어진다. 건설사업 관리기술은 프로젝트 시작단계에서부터 운영 유지관리 단계까지 단계별로 발생하는 비용에 대해 얼마나 경제적이고 효율적으로 관리하느냐에 따라 프로젝트의 성공여부를 결정짓는 역할을 한다. 이러한 단계별 비용항목의 체계적인 분석을 위해 본 연구에서는 국내 하수처리장을 대상으로 프로젝트 전반에 걸친 비용흐름 및 요소를 조사하였다. 특히 국내 하수처리시설의 유지관리비 DB를 조사하여 데이터 모델링을 수행하였고, 실적 DB의 불확실성을 고려하여 불확실성 해소를 위해 몬테카를로 시뮬레이션 방법을 이용하여 타당성 평가를 위한 평가 목적별(처리공법, 운영 주체 등) 유지관리비 예측 추세선을 제시하고자 하였다.

물리·화학적 공정을 이용한 해수 동물성 플랑크톤 Aretemia sp.의 소독 (Inactivation of Seawater Zooplankton Aretemia sp. using Physical and Chemical Processes)

  • 정창;김동석;박영식
    • 한국환경과학회지
    • /
    • 제24권9호
    • /
    • pp.1181-1188
    • /
    • 2015
  • In this study, we discussed about the application of the single physical and chemical treatment processes and the physical-chemical complex treatment processes on the inactivation of Artemia sp. in order to satisfy the USCG Phase II (United States Coast Guard). The results showed that initial disinfection rate of ultrasonic process in single batch process is higher than that of electrolysis. However, the inactivation rate showed slower than electrolysis. The inactivation rate of Artemia sp. on the single continuous treatment process ranked in the following order: homogenizer > electrolysis > ultrasonic process. Inactivation rate of Artemia sp. in continuous homogenizer-electrolysis complex process was reached at 100% immediately. A synergistic effect of ultrasonic-electrolytic complex process was found to be a small. The order of processes in a complex process did not affect the disinfection performance.

A Single-Center Retrospective Study on the Effects of Korean Medicine in 342 Traffic Accident Cases

  • Jeong, Jin-Ho;Ku, Jaseung;Hwang, Ji Hye
    • 대한약침학회지
    • /
    • 제24권3호
    • /
    • pp.122-137
    • /
    • 2021
  • Objectives: In South Korea, traffic accident victims can be treated under automobile insurance coverage. Korean medicine (KM) clinics have reported the largest number of automobile insurance fee claims among medical institutions. This study investigated the status of the KM automobile insurance system in a single KM clinic. Methods: We retrospectively surveyed the medical charts of 342 traffic accident patients treated at the Jisung KM clinic between January 2009 and June 2017. Results: Most of the patients were men and in their 30s. The most common method of locating the clinic was an internet search. The most common traffic accident type was collision between vehicles (83.63%), with 70.76% of patients visiting during the most acute phase. The major disease codes included S434, M4836, F072, S0600, and S3350. The most frequent treatment period was within 1 month of the accident, and most patients received 10 or fewer treatments. The mean treatment duration and number of treatments were 37.68 ± 45.11 days and 11.68 ± 10.63 treatments, respectively. The initial pain numerical rating scale (NRS), 7.32 ± 0.96, decreased to 3.57 ± 1.40 at the end of treatment, with a symptom improvement score of 1.87 ± 0.60. Regarding sex, age, disease duration, location at the time of the accident, presence of additional and psychological symptoms, and chuna, there were statistically significant differences in treatment duration and number of treatments. A higher number of treatments and the longer treatment duration was associated with a higher initial NRS, lower post-treatment NRS, and better improvement score. Since the introduction of traffic accident (TA) pharmacopuncture, the rate of use of a single type of pharmacopuncture increased; however, no significant differences in treatment duration and number, NRS before and after treatment, and improvement score were observed between treatment groups before and after TA pharmacopuncture. No adverse reactions were observed for any treatment. Conclusion: This study confirmed the previous findings of a high treatment effect of KM under automobile insurance. We also observed significant correlations based on a detailed medical status, which may explain the increasing use of KM in the automobile insurance system. Additional multi-center studies in different regions are needed.

비만의 펩타이드 치료제 (Peptides in Obesity Treatment)

  • 김경곤
    • 비만대사연구학술지
    • /
    • 제1권1호
    • /
    • pp.4-13
    • /
    • 2022
  • Currently, pharmacotherapy is becoming essential for obesity, owing to its expanding and increasing epidemiology. In this review, novel peptide-based drugs of four classes are covered: GLP-1 receptor agonist, GIP/GLP-1 receptor dual agonist, glucagon/GLP-1 receptor dual agonist, and a combination of amylin receptor agonist/GLP-1 receptor agonist. Semaglutide is a next-generation GLP-1 receptor agonist with a longer duration and stronger weight and glucose reduction effects than liraglutide and dulaglutide. In the STEP1 trial, semaglutide 2.4 mg reduced body weight by approximately 15% in people with obesity with similar or milder adverse events than liraglutide 3.0 mg. Tirzepatide, a GIP/GLP-1 receptor dual agonist, also has a long duration and strong weight- and glucose-lowering effect. According to SURPASS-2, 3, and 4, in patients with BMI≥25 kg/m2 and type 2 diabetes mellitus (T2DM), tirzepatide 15 mg reduced the initial body weight by >13%. Cotadutide, a glucagon/GLP-1 receptor dual agonist, showed weaker weight-lowering effects than semaglutide and tirzepatide, while it was comparable to that of liraglutide in a phase 2 clinical trial for non-alcoholic fatty liver disease in patients with BMI≥25 kg/m2 and T2DM. Additionally, its effect on the liver was noticeable. The long-acting amylin receptor agonist cargrilintide combined with semaglutide can be another effective option for obesity treatment. Even in a small phase 1 trial with a short study period of 20 weeks, cargrilintide 2.4 mg/semaglutide 2.4 mg reduced by 17% of initial body weight in people with BMI 27-39.9 kg/m2. In coming several years, semaglutide, tirzepatide, and cargrilintide/semaglutide will become available for obesity treatment in Korea.

Possible Strategies for Microstructure Control of Liquid-Phase-Sintered Silicon Carbide Ceramics

  • Chun, Yong-Seong;Kim, Young-Wook
    • 한국세라믹학회지
    • /
    • 제42권8호
    • /
    • pp.542-547
    • /
    • 2005
  • Keys to the attainment of tailored properties in SiC ceramics are microstructure control and judicious selection of the sintering additives. In this study, three different strategies for controlling microstructure of liquid-phase-sintered SiC ceramics (LPS-SiC) have been suggested: control of the initial $\alpha-SiC$ content in the starting powder, a seeding technique, and a post-sintering heat treatment. The strategies suggested offer substantial flexibility for producing toughened SiC ceramics whereby grain size, grain size distribution, and aspect ratio can be effectively controlled. The present results suggest that the proposed strategies are suitable for the manufacture of toughened SiC ceramics with improved toughness.

수열합성법에 의한 calcium phosphates 분말합성 (Preparation of calcium phosphates by hydrothermal synthesis route)

  • 문성욱;이병우
    • 한국결정성장학회지
    • /
    • 제29권5호
    • /
    • pp.203-207
    • /
    • 2019
  • 인산칼슘(hydroxyapatite(HAp), ${\beta}$-tricalcium phosphate(${\beta}$-TCP) 및 HAp와 ${\beta}$-TCP가 혼합된 2상 인산칼슘(BCP, HA/${\beta}$-TCP))들을 수열합성법을 통해 합성하였다. 여러 수열합성 조건(최고온도 $150^{\circ}C$ 및 pH 12 이하)에서 수산화칼슘($Ca(OH)_2$) 수용액과 인산($H_3PO_4$) 용액을 반응시켜 얻은 침전물을 수열합성에 이용하였다. 초기 전구체 Ca/P 비율을 1.30, 1.50 및 1.67로 조절하였으며 이 조성비와 합성 후 열처리가 분말 및 소결체의 상합성에 미치는 영향에 대해 조사하였다. 초기 전구체 Ca/P 비율을 조절함으로써 분말 및 소결체의 상의 조절이 가능하였다. Ca/P 비율이 1.67일 경우 모든 열처리 온도에서 분말 및 소결체 모두에서 HAp 단일 상이 합성되었다. Ca/P 비율이 1.30과 1.50에서 $900^{\circ}C$ 이상 열처리 할 경우 각각 순수한 ${\beta}$-TCP와 BCP(HAp/${\beta}$-TCP)가 합성되었다. 반응성 높은 미세한 분말을 이용하여 소결함으로써 미세한 입경을 가지며 투광성을 가지는 소결체들을 저온에서 얻을 수 있었다.

Fe-Si-Mn-P강판의 초기조직변화가 잔류오스테나이트 형성 및 인장성질에 미치는 영향 (Effect of Initial Structure on the Retained Austenite and Tensile Properties of Fe-Si-Mn-P Steel Sheet)

  • 문원진;강창용;김한군;김기돈;성장현
    • 열처리공학회지
    • /
    • 제10권1호
    • /
    • pp.10-19
    • /
    • 1997
  • This study has been conducted to investigate the effects of initial structure on the microstructure and tensile properties of high strength trip steel sheet. The initial structure before austempering remarkably influenced the second phase. The specimen with normalized initial structure showed mainly bainitic ferrite and retained austenite, while the as rolled specimen and spherodized specimen showed martensite plus retained austenite and martensite plus bainitic ferrite with small retained austenite, respectively. Two type of retained austenite, film type and granual type were observed in all specimens. The as rolled specimen appeared the highest contents of retained austenite owing to the compressive stress by cold rolling. The contents of retained austenite increased with increasing intercritical annealing temperature and austempering time. Tensile strength showed the highest in the as rolled specimen, while the highest elongation were obtained in the normalized specimen. The maximum T.S.${\times}$El. Value showed in normalized initial structure and increased with increasing intercritical annealing and austempering time. The highest Value of T.S.${\times}$El. obtained at austempering temperature of $400^{\circ}C$ and retained austenite of 12%.

  • PDF

Development of Parallel Trickling Biofilter for the Treatment of Gas-phase Trichloroethylene

  • Lee, Eun-Yeol;Seol, Eun-Hee;Bae, Hyun-Chul;Kim, Hyun-suk;Ye, Byung-Dae;Park, Sung-Hoon
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2001년도 추계학술발표대회
    • /
    • pp.537-540
    • /
    • 2001
  • A parallel TBF system that is consisted of two TBFs was developed f ‘ or the long-term treatment of gas-phase trichloroethylene (TCE). Each TBF was operated for TCE degradation or reactivation in a parallel mode, and the effect of switching time and operation variables between the two reactors was investigated. Within 12 hr after switching from TCE degradation to reactivation mode, the MO activity increased up to the initial level. More than 50 % of TCE was degraded for feed concentrations ranging from 5 to 17 ppmv, and completely 100 % removed at concentration of less than 5 ppmv, while TCE removal decreased severely over 28 ppmv. In various empty bed retention times (EBRTs), ranging 상 om 5.2 to 10.7 min, the optimal EBRT was 10.7 min that TCE conversion achieved more than 50 %. For the inlet loading below 23.4 mg TCE/L/day, TCE was entirely removed. The maximal TCE elimination capacity in this system was about 66.63 mg TCE/L/day. During the continuous treatment of TCE over 3 months, TCE removal efficiency was maintained at the range of about 50 %. In these results, the parallel TBF system can be available for the continuously TCE biodegrading operation.

  • PDF