• 공업화학
• /
• 제3권3호
• /
• pp.422-429
• /
• 1992

본 연구는 고무와 황동피복 코드간의 접착력 향상을 위하여 사용되는 resorcinol formaldehyde(RF) resin과 hexamethoxymethylmelamine(HMMM)이 고무 컴파운드내에서 나타내는 morphology와 접착특성에 대하여 고찰하였다. 가황후 resin은 구형의 형태로 시편 전체에 고르게 분포되어 있었고 그의 입경은 약 $2000{\AA}$정도였다. 코드와 함께 가황시킨 시편에서 코드 주위에 존재하는 resin함량이 감소한 것으로 보아 resin이 코드쪽으로 이동이 있었던 것으로 생각된다. 또한 모듈러스는 methylene donor인 HMMM의 양이 많을수록 증가하였으며, 접착층이 더 두껍게 형성되었다. 접착력은 열 노화에 의하여 상실되며 이는 대부분 초기에 발생함을 알 수 있었다. 접착컴파운드에서 가장 유리한 RF resin과 HMMM의 비는 물성, 접착층의 안정성, 열노화특성 등을 고려할 때 1 : 0.9이었다.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.202-209
• /
• 2019

이 연구의 목적은 저량의 기포가 혼입된 바텀애시 골재 기반 경량 콘크리트(Lightweight concrete made using bottom ash aggregates and foam, LWC-BF)의 압축강도 발현 및 역학적 특성에 대한 재현성 평가이다. 이를 위해 Ji et al.에 의해 수행되었던 동일한 배합표를 기준으로 총 6 배합을 수행하였다. 배합에서의 주요변수는 기포 혼입율과 물-결합재 비로서 각각 0~25% 및 25~30%로 변화하였다. 굳지 않은 콘크리트에서 초기 슬럼프, 슬러리 밀도와 굳은 콘크리트에서 재령별 압축강도, 쪼갬인장강도 및 파괴계수는 재현성 평가대상 이전 실험결과와 대체적으로 비슷하였다. 따라서, LWC-BF의 압축강도 및 역학적 특성은 기포 혼입에 의한 배합관리가 어려움에도 불구하고 그 재현성이 비교적 우수하였다.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.216-223
• /
• 2019

이 연구의 목적은 바텀애시 골재와 기포를 융합한 경량 콘크리트(bottom ash based lightweight concrete, LWC-BF)의 압축 응력-변형률 모델 제시이다. Yang 등이 제시한 응력-변형률 곡선식에서 LWC-BF 9 배합의 실험으로부터 얻은 탄성계수, 최대응력 시 변형률 그리고 최대응력 이후 최대응력의 50% 응력 시 변형률 값들을 이용하여 상승부와 하강부의 기울기를 결정하였다. 제시된 모델은 기포 혼입율의 증가와 함께 감소되는 초기 강성 및 증가되는 하강부 기울기를 잘 반영하면서 실험결과와 잘 일치하였다. 제시된 모델의 예측값과 실험값의 평균제곱근 오차로부터 결정된 평균값과 표준편차는 각각 0.19와 0.08로서 각각 1.23과 0.47 값을 보이는 fib 2010 모델에 비해 현저히 낮았다.

• 한국인터넷방송통신학회논문지
• /
• 제19권3호
• /
• pp.67-72
• /
• 2019

본 논문에서는 통신 채널에서 발생되는 찌그러짐의 영향을 최소화하기 위한 CCA 적응 등화 알고리즘에서 스텝 크기의 변화에 따른 성능을 해석하였다. CCA 알고리즘은 기존의 결정 지향 알고리즘 (DDA : Decision Directed Algorithm)과 축소 신호점 알고리즘 (RCA : Reduced Constellation Algorithm)의 적절한 결합 방식으로 송신 신호의 constant modulus와 결정 장치의 출력 신호를 compact slice 가중치만큼 고려하여 이들의 장점을 얻을 수 있다. 이 과정에서 compact slice 가중치를 고정시킨 후, 적응을 위한 알고리즘의 스텝 크기를 3가지로 변화시킬때의 성능을 컴퓨터 시뮬레이션을 통해 평가하였다. 시뮬레이션 결과 스텝 크기가 적을수록 수렴 속도는 늦지만 정상 상태 이후의 성능이 개선됨을 확인하였고, 특히 SER 성능에서는 스텝 크기가 적은 경우 robustness함을 알 수 있었다.

• Steel and Composite Structures
• /
• 제31권3호
• /
• pp.261-276
• /
• 2019

The study investigates the free vibration of a nano-scale sandwich beam by an extended high order approach, which has not been reported in the existing literature. First-order shear deformation theory for steel skins and so-called high-order sandwich panel theory for the core are applied. Next, the modified couple stress theory is used for both skins and cores. The Hamilton principle is utilized for deriving equations and corresponding boundary conditions. First, in the study the three-mode shapes natural frequencies for various material parameters are investigated. Also, obtained results are evaluated for two types of stiff and soft cores and isotropic, homogenous steel skins. In the research since the governing equations and also the boundary conditions are nonhomogeneous, therefore some closed-form solutions are not applicable. So, to obtain natural frequencies, the boundary conditions are converted to initial conditions called the shooting method as the numerical one. This method is one of the most robust approaches to solve complex equations and boundary conditions. Moreover, three types of simply supported on both sides of the beam (S-S), simply on one side and clamp supported on the other one (S-C) and clamped supported on both sides (C-C) are scrutinized. The parametric study is followed to evaluate the effect of nano-size scale, geometrical configurations for skins, core and material property change for cores as well. Results show that natural frequencies increase by an increase in skins thickness and core Young modulus and a decrease in beam length, core thickness as well. Furthermore, differences between obtained frequencies for soft and stiff cores increase in higher mode shapes; while, the more differences are evaluated for the stiff one.

• Steel and Composite Structures
• /
• 제47권2호
• /
• pp.269-287
• /
• 2023

The WGJ420 fire-resistant weathering (FRW) steel is developed and manufactured with standard yield strength of 420 MPa at room temperature, which is expected to significantly enhance the performance of steel structures with excellent fire and corrosion resistances, strong seismic capacity, high strength and ductility, good resilience and robustness. In this paper, the mechanical properties of FRW steel plates and buckling behavior of columns are investigated through tests at elevated temperatures. The stress-strain curves, mechanical properties of FRW steel such as modulus of elasticity, proof strength, tensile strength, as well as corresponding reduction factors are obtained and discussed. The recommended constitutive model based on the Ramberg-Osgood relationship, as well as the relevant formulas for mechanical properties are proposed, which provide fundamental mechanical parameters and references. A total of 12 FRW steel welded I-section columns with different slenderness ratios and buckling load ratios are tested under standard fire to understand the global buckling behavior in-depth. The influences of boundary conditions on the buckling failure modes as well as the critical temperatures are also investigated. In addition, the temperature distributions at different sections/locations of the columns are obtained. It is found that the buckling deformation curve can be divided into four stages: initial expansion stage, stable stage, compression stage and failure stage. The fire test results concluded that the residual buckling capacities of FRW steel columns are substantially higher than the conventional steel columns at elevated temperatures. Furthermore, the numerical results show good agreement with the fire test results in terms of the critical temperature and maximum axial elongation. Finally, the critical temperatures between the numerical results and various code/standard curves (GB 51249, Eurocode 3, AS 4100, BS 5950 and AISC) are compared and verified both in the buckling resistance domain and in the temperature domain. It is demonstrated that the FRW steel columns have sufficient safety redundancy for fire resistance when they are designed according to current codes or standards.

• 한국의류학회지
• /
• 제47권2호
• /
• pp.311-322
• /
• 2023

In this study, the properties of various material combinations were evaluated and an ideal material for fabricating protection pads for women's army combat uniforms was determined. Eight specimens were used for the evaluation: two types of materials, namely thermoplastic polyurethane for 3D printing, T and ethylene-vinyl acetate, E; two infill densities, namely 10%, 10 and 30%, 30; two types of pad designs, i.e., without holes, A and with holes, B; 2×2×2=8 and control E. The tensile strength, flexural strength, impact absorption, and weight of these specimens were evaluated. Results revealed that E was the most flexible material; however, its tensile strength and impact absorption were very low. Protection pads made from T (T-10A, T-10B, T-30A, and T-30B) had excellent tensile strength and impact absorption; however, they had low performance in ease of movement. Alternatively, protection pad with holes and an infill density of 30% produced using a combination of T and E had a high initial tensile modulus and exhibited excellent impact absorption. Moreover, it was flexible and light, which satisfies the standards and conditions required by protection pads. However, if T-E-10A and T-E-30B exhibited low impact absorption, as required, they can be regarded as appropriate materials for protection pads.

• Earthquakes and Structures
• /
• 제26권3호
• /
• pp.203-218
• /
• 2024

Beam-column joints in the frame structure are at high risk of brittle shear failure which would lead to significant residual deformation and even the collapse of the structure during an earthquake. In order to improve the damage issue and enhance the recoverability of the beam-column joints, a sector lead rubber damper (SLRD) has been developed. The SLRD can increase the bearing capacity and energy dissipation capacity, and also demonstrating recoverability of seismic performance following cyclic loading. In this paper, the hysteretic behavior of SLRD was experimentally investigated in terms of the regular hysteretic behavior, large deformation behavior and fatigue behavior. Furthermore, a parametric analysis was performed to study the influence of the primary design parameters on the hysteretic behavior of SLRD. The results show that SLRD resist the exerted loading through the shear capacity of both rubber parts coupled with the lead cores in the pre-yielding stage of lead cores. In the post-yielding phase, it is only the rubber parts of the SLRD that provide the shear capacity while the lead cores primarily dissipate the energy through shear deformation. The SLRD possesses a robust capacity for large deformation and can sustain hysteretic behavior when subjected to a loading rotation angle of 1/7 (equivalent to 200% shear strain of the rubber component). Furthermore, it demonstrates excellent fatigue resistance, with a degradation of critical behavior indices by no more than 15% in comparison to initial values even after 30 cycles. As for the designing practice of SLRD, it is recommended to adopt the double lead core scheme, along with a rubber material having the lowest possible shear modulus while meeting the desired bearing capacity and a thickness ratio of 0.4 to 0.5 for the thin steel plate.

• Journal of the Korean Wood Science and Technology
• /
• 제52권3호
• /
• pp.205-220
• /
• 2024

Various polylactic acid (PLA) blends were reinforced with untreated or silane-treated micro-sized cellulose fiber (MCF), successfully prepared as 3D printing filaments and then printed using a fused filament fabrication (FFF) 3D printer. In this study, we focused on developing 3D-printed MCF/PLA composites through silane treatment of MCF and investigating the effect of silane treatment on the various properties of FFF 3D-printed composites. Fourier transform infrared spectra confirmed the increase in hydrophobic properties of silane-treated MCF by showing the new absorption peaks at 1,100 cm^-1, 1,030 cm^-1, and 815 cm^-1 representing C-NH₂, Si-O-Si, and Si-CH₂ bonds, respectively. In scanning electron microscope images of silane-treated MCF filled PLA composites, the improved interfacial adhesion between MCF and PLA matrix was observed. The mechanical properties of the 3D-printed MCF/PLA composites with silane-treated MCF were improved compared to those of the 3D-printed MCF/PLA composites with untreated MCF. In particular, the highest tensile and flexural modulus values were observed for S-MCF10 (5,784.77 MPa) and S-MCF5 (2,441.67 MPa), respectively. The thermal stability of silane-treated MCF was enhanced by delaying the initial thermal decomposition temperature compared to untreated MCF. The thermal decomposition temperature difference at T₉₅ was around 26℃. This study suggests that the effect of silane treatment on the 3D-printed MCF/PLA composites is effective and promising.

• 콘크리트학회논문집
• /
• 제18권2호
• /
• pp.275-282
• /
• 2006

최근 철근 콘크리트 구조물에서 철근의 부식문제를 근본적으로 해결하기 위한 대안으로 섬유강화폴리머(Fiber Reinforced Polymers, FRP)가 주목받고 있다. FRP는 철근에 비해 높은 비강도를 가지며, 무게가 가볍다. 특히 내부식성이 뛰어나 염해와 같은 열악한 환경에 특히 유용하다. 그러나 재료단가가 철근에 비해 높고, 장기거동에 대해 구축되어 있는 정보가 적으며 항복 거동을 보이는 철근과는 달리 취성파괴를 일으키기 때문에 FRP를 토목재료로 사용하려는 노력은 더디게 진행되고 있다. FRP 제작에 사용되는 섬유 중 유리섬유가 가장 경제적이지만 강성이 철근에 비해 대략 1/4 정도 밖에 되지 않아 휨부재에 사용될 경우 과도한 처짐 문제가 발생한다. 이에 본 연구에서는 유리섬유로 제작된 FRP(Glass Fiber Reinforced Polymer, GFRP) 로드(Rod)의 인장특성을 개선하고자 탄소와 유리섬유로 제작된 하이브리드 로드의 인장특성에 관한 연구를 수행하였다. 로드 제작에 사용되는 수지 종류와 배치 방법에 대해 변수를 설정하여 총 40개의 시편을 제작하여 인장실험을 실시하였다. 하이브리드 로드의 인장특성은 섬유가 혼합되지 않은 순수한 유리섬유와 탄소섬유로만 제작된 로드의 인장특성과 비교하였다. 실험 결과에 따르면 로드의 핵은 탄소섬유로, 외피는 유리섬유로 제작된 하이브리드 로드의 인장특성이 가장 우수하였다.