• Steel and Composite Structures
• /
• 제37권5호
• /
• pp.517-532
• /
• 2020

This paper firstly developed a new type of Double Skin Composite (DSC) beams using novel enhanced C-channels (ECs). The shear behaviour of novel ECs was firstly studied through two push-out tests. Eleven full-scale DSC beams with ECs (DSCB-ECs) were tested under four-point loading to study their ultimate strength behaviours, and the studied parameters were thickness of steel faceplate, spacing of ECs, shear span, and strength of concrete core. Test results showed that all the DSCB-ECs failed in flexure-governed mode, which confirmed the effective bonding of ECs. The working mechanisms of DSCB-ECs with different parameters were reported, analysed and discussed. The load-deflection (or strain) behaviour of DSCB-ECs were also detailed reported. The effects of studied parameters on ultimate strength behaviour of DSCB-ECs have been discussed and analysed. Including the experimental studies, this paper also developed theoretical models to predict the initial stiffness, elastic stiffness, cracking, yielding, and ultimate loads of DSCB-ECs. Validations of predictions against 11 test results proved the reasonable estimations of the developed theoretical models on those stiffness and strength indexes. Finally, conclusions were given based on these tests and analysis.

• 한국지반신소재학회논문집
• /
• 제16권2호
• /
• pp.89-96
• /
• 2017

본 연구에서는 국내에서 30m 이상인 대심도에서 강성이 큰 CS-H벽체를 만들기 위하여 지반신소재를 이용하였으며 지반신소재의 혼입율과 슬럼프(슬럼프 플로우) 값에 변화를 주어 현장여건에 맞는 배합을 실시하였으며 목표 슬럼프 180mm 및 슬럼프 플로우 500mm에서는 초기 휨강도, 장기 거동특성 및 탄성계수의 역학적 특성과 동시에 경제성을 모두 만족할 수 있는 배합을 확인하였으나 슬럼프 플로우 600mm에서는 역학적 특성 및 초기, 장기 거동특성에서 취약한 결과를 보였다.

• 한국강구조학회 논문집
• /
• 제15권2호
• /
• pp.219-229
• /
• 2003

타정식 및 자정식 현수교의 정확한 초기형상을 결정하기 위하여 초기부재력법과 TCUD법을 효과적으로 결합시킨 개선된 해석 방법을 제시한다. 먼저 기하학적 선형해석을 수행하여 장력의 초기값을 가정한다. 이제 케이블의 무응력길이를 변수로 취급하여 TCUD법에 근거한 반복계산이 이루어진다. 수렴이 되면 현수교의 주탑 및 보강형의 축방향 변위를 제거하기 위하여, 케이블의 장력과 주탑, 보강형의 압축력, 그리고 주케이블의 절점 수직변위의 수렴된 값은 이용하고 나머지 부재력과 좌표값은 초기값으로 재조정하여 초기부재력법을 적용한다. 케이블요소의 모델링에서 무응력길이를 변수로 추가함으로써 주케이블 및 행어 정착부의 변위와 주탑의 수평변위를 설계목적에 적합하도록 제어하여 휨모멘트를 최소화하였고, 초기부재력법을 결합시켜 보강형, 주탑의 축방향변위가 발생하지 않는 해석결과를 얻을 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.343-347
• /
• 2008

Design of shape for visco-elastic vibration isolation elements, which are very cost-effective and so popular in many applications is frequently based on experiences, intuitions, or trial and errors. Such traditions in shape design make it difficult for drastic changes or new concepts to come out. In this paper, both topological method and shape optimization method are combined together to find out a most desirable isolator shape efficiently by using two commercial engineering programs. ABAQUS and MATLAB. The procedure is divided into two steps. At the first step, a topology optimization method is employed to find an initial shape. where density of either 0 or 1 for finite elements is used for physical realizability. At the second step, based on the initial shape, finer tuning of the shape is done by boundary movement method. An illustration of the procedure will be presented for a mount of an air-conditioner compressor system and the effectiveness will be discussed.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1250-1255
• /
• 2008

Design of shape fur visco-elastic vibration isolation elements, which are very cost-effective and so popular in many applications is fi?equently based on experiences, intuitions, or trial and errors. Such traditions in shape design make it difficult for drastic changes or new concepts to come out. In this paper, both topological method and shape optimization method are combined together to find out a most desirable isolator shape efficiently by using two commercial engineering programs, ABAQUS and MATLAB. The procedure is divided into two steps. At the first step, a topology optimization method is employed to find an initial shape, where density of either 0 or 1 for finite elements is used fur physical realizability. At the second step, based on the initial shape, finer tuning of the shape is done by boundary movement method. An illustration of the procedure is presented fur a mount of an air-conditioner compressor system and the effectiveness is discussed.

• 한국전산구조공학회논문집
• /
• 제15권2호
• /
• pp.367-377
• /
• 2002

이 논문은 탄성지반 위에 놓인 낮은 아치의 자유진동에 관한 연구이다. Pasternak가 제안한 두 개의 매개변수로 표현되는 지반모형을 채택하여 대상아치의 자유진동을 지배하는 미분방정식을 유도하였다. 양단회전 및 양단고정의 단부 조건을 갖는 두 종류의 아치선형을 유도된 지배방정식에 적용하여 Galerkin method로 해석함으로써 최저차 대칭 및 역대칭 고유진동수 방정식을 산출하였다 아치높이, Winkler지반계수 및 전단지반계수가 고유진동수에 미치는 영향을 분석하였으며, 아치선형이 고유진동수에 미치는 영향을 분석하였다.

• Structural Engineering and Mechanics
• /
• 제76권3호
• /
• pp.395-412
• /
• 2020

In this article, the values of internal force and deformation of a curved beam under any action with the firm or elastic supports are determined by using structural matrices. The article presents the general differential formulation of a curved beam in global coordinates, which is solved in an orderly manner using simple integrals, thus obtaining the transfer matrix expression. The matrix expression of rigidity is obtained through reordering operations on the transfer notation. The support conditions, firm or elastic, provide twelve equations. The objective of this article is the construction of the algebraic system of order twenty-four, twelve transfer equations and twelve support equations, which relates the values of internal force and deformation associated with the two ends of the directrix of the curved beam. This final algebraic system, expressed in matrix form, is divided into two subsystems: twelve algebraic equations of internal force and twelve algebraic equations of deformation. The internal force and deformation values for any point in the curved beam directrix are determined from these values in the initial position. The five examples presented show how to apply the matrix procedures developed in this article, whether they are curved beams with the firm or elastic support.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.107-112
• /
• 2002

기본적으로 선박의 판 부재로 구성되어 있고 선체구조의 전체적인 강도는 선체판의 강도와 강성에 지배를 받게 된다. 만약 국부적인 좌굴이 발생하게 되면 선체판의 강도는 급격하게 감소하게 된다 이러한 좌굴현상은 선박구조 전체에 심각한 영향을 미치게 되는데 좌굴은 구조강도평가에 있어서 중요한 실계요소 중 한가지이다. 이 연구논문에서는 압축하중이 작용하고 있는 선체판에 대해서 면내하중 변화를 연구하였으며 제안된 면내하중식은 탄성 혹은 탄소성 영역에서 좀더 만족할만한 설계를 하는데 있어서 좀더 효율적이라고 판단된다.

• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.863-882
• /
• 2016

This study aims to introduce a new bracing system by which even super-wide frames with large openings can be braced. The proposed system, hereafter called Cable-Pulley Brace (CPB), is a tension-only bracing system with a rectilinear configuration. In CPB, a wire rope passes through a rectilinear path around the opening(s) and connects the lower corner of the frame to its opposite upper one. CPB is a secondary load resisting system with a nonlinear-elastic hysteretic behavior due to its initial pre-tension load. As a result, the required energy dissipation would be provided by the MRF itself, and the main intention of using CPB is to contribute to the initial and post-yield stiffness of the whole system. Using a stiffness calibration technique, optimum placement of the CPBs is discussed to yield a uniform displacement demand along the height of the structure. A displacement-based design procedure is proposed by which the MRF with CPB can be designed to achieve a uniform distribution of inter-story drifts with predefined values. Obtained results indicated that CPB leads to significant reductions in maximum and residual deformations of the MRF at the expense of minor increase in the maximum base shear and developed axial force demands in the columns. In the case of a typical 5-story residential building, compared to SMRF system, CPB system reduces maximum amounts of inter-story and residual drifts by 35% and 70%, respectively. Moreover, openings of the frame are not interrupted by the CPB. This is the most appealing feature of the proposed bracing system from architectural point of view.

• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.89-100
• /
• 2023

This paper conducts a parametric study of a new tuned mass damper with pre-strained superelastic SMA helical springs (SMAS-TMD) on the vibration reduction effect. First, a force-displacement relation model of superelastic SMA helical spring is presented based on the multilinear constitutive model of SMA material, and the tension tests of the six SMA springs fabricated are implemented to validate the mechanical model. Then, a dynamic model of a single floor steel frame with the SMAS-TMD damper is set up to simulate the seismic responses of the frame, which are testified by the shaking table tests. The wire diameter, initial coil diameter, number of coils and pre-strain length of SMA springs are extracted to investigate their influences on the seismic response reduction of the frame. The numerical and experimental results show that, under different earthquakes, when the wire diameter, initial coil diameter and number of coils are set to the appropriate values so that the initial elastic stiffness of the SMA spring is between 0.37 and 0.58 times of classic TMD stiffness, the maximum reduction ratios of the proposed damper can reach 40% as the mass ratio is 2.34%. Meanwhile, when the pre-strain length of SMA spring is in a suitable range, the SMAS-TMD damper can also achieve very good vibration reduction performance. The vibration reduction performance of the SMAS-TMD damper is generally equal to or better than that of the classic optimal TMD, and the proposed damper effectively suppresses the detuning phenomena that often occurs in the classic TMD.