• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.5
• /
• pp.487-495
• /
• 2016

In the offshore project such as semi-submersible FPU and FPSO, the free fall type life boat called TEMPSC (Totally Enclosed Motor Propelled Survival Craft) has been installed for the use of an emergency evacuation of POB (People on Board) from the topside platform. For the design of life boat arrangement for semi-submersible FPU in the initial design stage, the drop height and launch angle are required fulfill with the limitation of classification society rule and Company requirement, including type of approval as applicable when intact and damage condition of the platform. In this paper, we have been performed the numerical studies to find proper arrangement for the life boats consider drop height in various environmental conditions such as wave, wind and current. In the calculations, the contributions from static and low frequency (LF) motions are considered from the hydrodynamic and mooring analysis as well as damage angle from the intact and damage stability analysis. Also, Air-gap calculation at the life boat positions has been carried out to check the effect on the life boat arrangement. The air-gap assessment is based on the extreme air-gap method includes the effect of 1st order wave frequency (WF) motions, 2nd order low frequency roll/pitch motion, static trim/heel and set down.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.13-14
• /
• 2012

Than fluorescent lamps or light bulbs, long life, small power consumption and to the development of modern technology, LED (Light Emitting Diode) devices have the advantage of easy control. For these reasons, using the LED device, lighting has been widely used. LED using optical fiber technology using LED lighting technology with the development of wireless communication technology is attracting attention again. Using LED lights this study analyzed the performance of the technology transfer and implementation of the information transmission system of the visible light communication using LED lighting of the White Visible Light Communication (VLC) based PC module transmitter and receiver modules. Has made a system that can transmit information more than the value of the initial distance ~ 50cm, depending on the presence or absence of the lens, in order to increase the efficiency of the LED modules with different efficiencies that could confirm the performance of the implementation of the research, analysis, and application methods. and about the possibility that you want to check.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2431-2436
• /
• 2012

This paper is implemented simple visible light communication system by combining the communications through LED lighting. It uses a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter to realize LED visible light communication. Initial distance value of the developed transmission and receiver is more than 0~1.5m for LED visible light communication, the overall system transmission rate is organized with thousands kbps variability visible light media transmission system. It was measured the performance experiment during lens wearing or not wearing in order to increase the overall efficiency of the LED module, configures the LED and PD to existing PC module for the performance analysis of the implemented research, experiments the maximum communication distance of the transmitter/receiver according to LED count and the transmission rate, check about application methods and the possibility.

• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.278-288
• /
• 2007

We propose the fast full search algorithm that reduces the computational load of the block matching algorithm which is used for a motion estimation in the video coding. Since the conventional spiral search method starts searching at the center of the search window and then moves search point to estimate the motion vector pixel by pixel, it is good for the slow motion picture. However we proposed the efficient motion estimation method which is good for the fast and slow motion picture. Firstly, when finding the initial threshold value, we use the expanded predictor that can approximately calculate minimum threshold value. The proposed algorithm estimates the motion in the new search order after partitioning the search window and adapt the directional search order in the re-divided search window. At the result, we can check that the proposed algorithm reduces the computational load 94% in average compared to the conventional spiral full search algorithm without any loss of image quality.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.3
• /
• pp.123-127
• /
• 2009

After a health examination, abnormal patients were classified into two groups. One needs clinical treatment immediately, while the other one needs check-up in 2~3 month after for blood tests and preventive medical study. To discover the status and importance of the follow-up study in a health program, blood test upon health examination was compared to the test from the follow-up. We examined patients of ages from 20's to 70's. Among these patients, most of them were between 40's and 50's, and in male patients the follow-up test were more freguent than female. We examined blood obtained from January 2007 to December 2008. We analyzed and compared initial and the follow up blood test. Lipid profile, liver test, thyroid function tests (TFTs), glucose fasting, and HbA1c were examined from the blood tests. We also surveyed their distribution and status. The value of the follow up blood tests was significantly decreased with the most striking differences in lipid profiles and liver test. Follow up study is able to improve life style of patients through doctor's advice in a health program. Therefore, we can conclude that the follow up blood test is also quite critical.

• Transactions of Materials Processing
• /
• v.20 no.4
• /
• pp.316-323
• /
• 2011

The hot curvature-forming of large aluminum thick plate using a grid-typed hybrid die is a process for the production of a spherical LNG tank. Many variables such as the initial die surface quality, grid size, grid thickness, size of blank plate and cooling line design, control the success of the process. In addition, the plate used in this process is generally larger than $10{\times}10m$ in size. Thus, it is very difficult to predict the surface characteristics of the plate during forming and to measure the different parameters due to the high cost of the experiments. In order to optimize the process design for the grid-type die, the development of an analytical method to predict the surface characteristics of the final product in hot curvature-forming is needed. This paper described the development of the method and procedures for FE simulations of the hot curvature-forming process, including hot forming, air flow, cooling, and thermal deformation analyses. An experiment for a small scale model of the process was conducted to check the validity of the numerical method. The results showed that the curvature of the plate in the analysis agrees well with that of the experiment within 0.037 and 0.016% tolerance margins for its side and corner, respectively.

• Journal of Digital Convergence
• /
• v.18 no.1
• /
• pp.147-157
• /
• 2020

The purpose of this study was to investigate the factors influencing the intent to revisit among health screening center customers. The subjects were 195 customers of a health screening center. The intent to revisit was positively correlated with customer satisfaction and word-mouth communication. Multiple regressions showed that customer satisfaction and perceived health status explained 29% of the variance of the intent to revisit. In order to increase the intent to revisit, hospital and nursing managers should strive to improve customer satisfaction. In particular, strategies to arrange explanation of the result consultations, individual health management tailored to customers' needs, and customers-relationship management for continuing relations with the customer should be needed. In addition, it will be needed to expand the roles of nurses who are working in the health screening center from simple heath check or customer reception to active health education and continuous health screening plan after initial one.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1837-1844
• /
• 2014

The study of safety culture estimate has received a wide attentions in many other industries, rather in the contexture of railroad stands at an initial phase. A factor analysis and internal reliability test were conducted to check if the survey results are reliable by looking at how the factors are dimensioned and how the questionnaires are sub-grouped in accordance with such factors, and further if there are any other common attributes being extracted as a new factor. The designed 5 factors were expanded to 7 through the test, and they were renamed accordingly. The questionnaires are reorganized according to the new 7 factors. It implicates that thorough investigation of the common attributes is important in reducing the gaps between interviewers' and interviewees' understanding. Moreover, the results of internal reliability test represent the new design of questionnaire is reasonably acceptable with the high reliable values. We expect such approaches can be applied for the railway culture survey study to be more reliable and applicable.

• Journal of Environmental Science International
• /
• v.12 no.10
• /
• pp.1079-1084
• /
• 2003

This study was carried out to check changes of components in the slaughter waste by the bacteria isolated from slaughter wastes from Gyungnam Province from May to June 2000, and to find usefu] organism for treatment of the waste. Bacteria used in this study were Aeromonas hydrophila, as the dominant of the waste. Optimum conditions for bacterial culture were obtained as the temperature of 35$^{\circ}C$, pH 6.5, and shaking of 120 rpm in nutrient broth. The mean values of dissolved oxygen was 4.14 mg/1; biochemical oxygen demand, 1731.21 mg/1; ratio of BOD/COD, 0.53-0.64; ratio of T-P/T-N, 1.0-1.41; and viable counts of the waste, 5.47${\times}$10$\^$7/ CFU. Little change in total nitrogen observed by 36 hr of the culture. The largest amount of increasing NH$_4$$\^$+/-N was observed in the sample that 10% of the waste added in nutrient broth with A. hydrophila showing the value of 29.19 mg/l at the beginning to 570.36 mg/1 by 36 hr of culture. However, the highest increasing ratio between initial amount and finals at 36 hr of culture showed as 41.6 times when 3% of the waste added. NO$_3$ -N was decreased showing the value of 71.27 mg/1 to 32.14 mg/1 by 24 hr of culture with the organism when 10% of the waste added in nutrient broth. Total phosphorus was decreased showing the value from 188.74 mg/1 to 101.41 mg/1 after 12 hr of culture with the organism when 5% of the waste added in nutrient broth, while T-P was decreased gradually by 24 hr of culture from 193.8 to 101.4 mg/1 when 10% of the waste added.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1513-1518
• /
• 2012

This paper is implemented media transmission system of VLC transmitter and receiver module using LED of White lighting that is based on PC module and to transmission technology for performance analysis. To realize LED visible light communication receiver is used 1~12 LED light-emitting device and transmitter is used a variable sensor. Developed initial distance of the tranceiver is more than 0~1m for LED VLC and the overall system transmission speed is achieved on variable having Visible light media transmission system. Composition to PC module with LED module and infrared sensor for performance analysis, predict and analyze the communication distance, check about the possibility of application methods. Measure each performance when the lens wearing and not wearing in order to increase the overall efficiency of the LED module, can know that increase efficiency of approximately 20%.