• Tribology and Lubricants
• /
• v.18 no.5
• /
• pp.345-350
• /
• 2002

Recently, as the development of manufacturing technique on SMC(sheet molding compound), various numerical and experimental approaches to injection and compression molding have been investigated. Injection and compression molding, however, has so various cases with complicated boundary condition that it is difficult to analyze mold characteristics precisely. In addition, since a slight change in process variables can significantly change the resulting mold thickness, a proper design is important to compression molding process. Therefore, in this study, the effects of various parameters on compression molding process have been investigated using FEM(finite element method) to formulate the melt front advancement during the mold filling process. To verify the results of present analysis, they are compared with those of reference. The results show a strong effect of initial charge volume, injection time and pressure as a result of variations in the rectangular charge shape.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.474-480
• /
• 2008

In order to make full color cholesteric displays, color filter-less R, G, B sub-pixel structured cholesteric LC cells have been studied. To make R, G, B colors, UV induced pitch variant chiral dopant was added to cholesteric LC mixtures. The concentration of the photo-sensitive chiral dopant was adjusted so that the initial state showed blue color and the color was changed from blue to green and red with increase of UV irradiation to the cholesteric cells. To prevent the mixing of R, G, B reflective sub-pixel liquid crystals, separation walls were formed using negative photo resister in boundary area between sub-pixels, Through the optimization of the material concentrations and UV irradiation condition, vivid R, G, B colors were achieved.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2067-2072
• /
• 2007

Understanding of the impinging behavior of an electrically charged spray is essential in determining appropriate operating conditions for electro-spraying of paints, surface coating materials and insecticides. In the present work, as an initial step, the wall impact of an electrically charged droplet has been experimentally investigated. The charged drops were directed on the surface of a paraffin wax, and the impinging behavior was visualized and recorded using a CCD camera to identify the impingement regime. The spread-rebound boundary for the charged drop turned out to be smaller compared to that for an electrically neutral droplet under the same surface condition. The shift of the transition criterion is considered to be due to the discrepancy between the maximum spread ratio of the electrically charged droplet and that of the neutral droplet.

• Communications of the Korean Mathematical Society
• /
• v.23 no.4
• /
• pp.529-540
• /
• 2008

This paper deals the global existence and blow-up properties of the following non-Newton polytropic filtration system, $${u_t}-{\triangle}_{m,p}u=u^{{\alpha}_1}\;{\int}_{\Omega}\;{\upsilon}^{{\beta}_1}\;(x,\;t)dx,\;{\upsilon}_t-{\triangle}_{n,p}{\upsilon}={\upsilon}^{{\alpha}_2}\;{\int}_{\Omega}\;u^{{\beta}_2}\;(x,{\;}t)dx,$$ with homogeneous Dirichlet boundary condition. Under appropriate hypotheses, we prove that the solution either exists globally or blows up in finite time depends on the initial data and the relations of the parameters in the system.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.5
• /
• pp.411-417
• /
• 2017

In this study, Sunroot was used as material in the fermentation process. Sunroot are widely distributed in Korea, The main component is composed of inulin. Fermented vinegar stimulates digestion in the body, as well as to relieve stress is a cause of increasing the neurotransmitter-Serotonin of the body. Therefore, we conducted fermentation studies using sunroot. This research conducted seven days, and the pH and brix value analysis was done every 12 hours during fermentation process. The experimental results show that the fermentation product under blender treatment is better than cutting treatment and without cutting treatment. Initial brix 25% is the best treatment for fermentation because produce fermentation product with a good taste and aroma than other treatment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.190-193
• /
• 2004

Ever since the ideal forming theory has been developed fur process design purposes, application has been limited to sheet forming and, for bulk forming, to two-dimensional steady flow. Here, application for the non-steady case was performed under the plane-strain condition based on the theory previously developed. In the ideal flow, material elements deform following the minimum plastic work path (or mostly proportional true strain path) so that the ideal plane-strain flow can be effectively described using the two-dimensional orthogonal convective coordinate system. Besides kinematics, for a prescribed final part shape, schemes to optimize a preform shape out of a class of initial configurations and also to define the evolution of shapes and boundary tractions were developed. Discussions include the two problematic issues on internal tractions and the non-monotonous straining. For demonstration purposes, numerical calculations were made for a bulk part under forging.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.224-229
• /
• 1996

Performance characteristics of single cell in phosphoric acid fuel cell were studied for various electrode fabrication parameters such as teflon content, electrode structure, thickness of electrocatalyst layer, platinum content and electrode area. The performance of single cell was decided from the measured voltage-current through a load change. The electrode of 40wt.% teflon exhibited high initial performance of single cell, but in the long term operation, the cell performance of 45 wt.% teflon was better. Also the single cell appeared good performance in case of electrodes with duplicate structure, thin electrocatalyst in thickness, more platinum content, and small area. These results of cell performance were discussed as related to the electrolyte flooding, formation of 3 phase boundary area, internal resistance of electrode, and microstructure of electrode.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1530-1541
• /
• 2013

The coexistence and extinction of species are important concepts for biological systems and can be distinguished by an investigation of stability. When determining local stability of nonlinear systems, Lyapunov indirect method based on the Jacobian linearization has been widely employed due to its simplicity. Despite such popularity, it is not applicable to singular systems whose Jacobian has at least one eigenvalue that is equal to zero. In such singular cases, an appropriate Lyapunov function should be sought to determine the stability of systems, which is rather difficult and quite involved. In this paper, we seek for a simple criterion to determine stability of the equilibrium that is located at the boundary of the positive orthant, when one of eigenvalues of the Jacobian is zero. The goal of the paper is to present a generalized condition for the equilibrium to attract all trajectories that starting from initial condition in the positive orthant and near the equilibrium. Unlike the Lyapunov direct method, the proposed method requires just a simple algebraic computation for checking the stability of the critical point. Our approach is applied to various biological systems to show the effectiveness of the proposed method.

• Journal of Internet Computing and Services
• /
• v.3 no.6
• /
• pp.13-24
• /
• 2002

This paper presents an automatic approach to detect face and facial feature from face images based on the color information and deformable model. Skin color information has been widely used for face and facial feature diction since it is effective for object recognition and has less computational burden, In this paper, we propose how to compensates varying light condition and utilize the transformed YCbCr color model to detect candidates region of face and facial feature from color images, Moreover, the detected face facial feature areas are subsequently assigned to a initial condition of active contour model to extract optimal boundaries of face and facial feature by resolving initial boundary problem when the active contour is used, The experimental results show the efficiency of the proposed method, The face and facial feature information will be used for face recognition and facial feature descriptor.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.2
• /
• pp.197-215
• /
• 2015

Modeling water flow in variably saturated, porous media is important in many branches of science and engineering. Highly nonlinear relationships between water content and hydraulic conductivity and soil-water pressure result in very steep wetting fronts causing numerical problems. These include poor efficiency when modeling water infiltration into very dry porous media, and numerical oscillation near a steep wetting front. A one-dimensional finite element formulation is developed for the numerical simulation of variably saturated flow systems. First order backward Euler implicit and second order Crank-Nicolson time discretization schemes are adopted as a solution strategy in this formulation based on Picard and Newton iterative techniques. Five examples are used to investigate the numerical performance of two approaches and the different factors are highlighted that can affect their convergence and efficiency. The first test case deals with sharp moisture front that infiltrates into the soil column. It shows the capability of providing a mass-conservative behavior. Saturated conditions are not developed in the second test case. Involving of dry initial condition and steep wetting front are the main numerical complexity of the third test example. Fourth test case is a rapid infiltration of water from the surface, followed by a period of redistribution of the water due to the dynamic boundary condition. The last one-dimensional test case involves flow into a layered soil with variable initial conditions. The numerical results indicate that the Crank-Nicolson scheme is inefficient compared to fully implicit backward Euler scheme for the layered soil problem but offers same accuracy for the other homogeneous soil cases.