• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.361-370
• /
• 2011

This study was conducted to obtain basic a information on growth characteristics, productivity, and feed values of whole crop barleys with different awn types. The field experiments were conducted on land at Iksan, Jeollabuk-do province in Korea for one year. Six barleys with three different awn types, such as Youngyang (rough), Yuyeon (hood), Youho (hood), Iksan449 (hood), Iksan456 (hood), and Iksan448 (awnless), were used in this study. Barleys were harvested on five growth stages after (DAH); 20 days after heading (20 DAH), 25 DAH, 30 DAH, 35 DAH, and 40 DAH. Heading was earlier in Yuyeon (April 22), while was later in Iksan448 (April 29). The maximum dry matter and total digestible nutrients (TDN) yields, 11.8 and 8.1 ton per ha, respectively, was recorded in Ikan456 harvested at 35~40 DAH, followed by Youngyang, Yuyeon, Iksan448, Youho and the lowest in Iksan449. They were increased significantly with advancing crop maturity. Crude protein content was the highest in Iksan448 (10.9%) and the lowest in Youho (9.7%) and that was decreased significantly with late harvest. Total digestible nutrients (TDN) and relative feed value (RFV) were the highest in Iksan448 (73.0%, 183.8, respectively) and the lowest in Iksan456 (68.0%, 135.4, respectively) and they were increased significantly with late harvest. The mean RFV evaluated by awn types was the highest in Iksan448 (183.8) of awnless, the lowest in Youho (149.5) and Iksan456 (135.4), indicated the insufficiency of hooded type barleys as good fodder use. Therefore, in this study suggest that hooded barley should improve forage productivity as well as quality.

• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.401-410
• /
• 2012

This study examines the authenticity discrimination of the circulated honey by using stable isotope ratio methods. In the case of domestic honey, the range of ${\delta}^{13}C$ for the samples labeled as pure honey was about -27- -21‰ at the $C_3$ origin, and the range of that for artificial honey was over -19‰ at the $C_4$ origin. The range of ${\delta}^{13}C$ for all imported honey was over -27- -23‰ originating from the $C_3$ plant. According to the nectar-source, ${\delta}^2H$ and ${\delta}^{18}O$ for domestic honey were significantly different for 6 and 5 groups, respectively. However, we could not explain the detailed relationship as well as the geographical feature of ${\delta}^2H$ and ${\delta}^{18}O$. The difference for ${\delta}^2H$ and ${\delta}^{18}O$ in the wide range of latitude, such as between Australia and Canada, was more or less shown. However, it was difficult to find out the trends of ${\delta}^2H$ and ${\delta}^{18}O$ for imported honey versus the geographical information in the similar latitudinal country.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.911-920
• /
• 2016

Norovirus is the most common causative agent of acute gastroenteritis. This study was carried out to investigate molecular epidemiology of norovirus infections from outbreaks in Busan from 2012 to 2015. Total of 581 stool specimens were collected from diarrhea patients in outbreaks in Busan, 71 samples were resulted in positive to norovirus. The data were analyzed according to seasonality, patient, age and gender. Noroviruses were detected most frequently during the winter season from November (25.4%) to February (28.2%). The age group from teens was the most susceptible to norovirus infections. To obtain the molecular genetic information of norovirus, we performed sequencing analyses of the strains detected. Norovirus genotypes have been reported to show high genetic diversity. Four kinds of GI genotypes (GI-1, GI-2, GI-3, GI-5) and five kinds of GII genotypes (GII-1, GII-4, GII-5, GII-6, GII-17) were indentified in outbreaks in Busan. Other previous studies have shown that GII-4 is the most predominant circulating in Korea and worldwide. The most prevalent norovirus genotypes of each year were GII-6 in 2012, GII-6 in 2013, GII-4 in 2014 and GII-6 in 2015. Except for 2014, GII-6 genotype was the most prevalent and predominant in Busan. We described the epidemiological analysis of the noroviruses in outbreaks in Busan. The result of this study will contribute to update the epidemiological data and improve hygiene and public health via sustainable surveillance.

• Journal of Life Science
• /
• v.27 no.9
• /
• pp.1064-1069
• /
• 2017

This study compared the cytotoxic effect of extracts from four different sea bream species (Pagrus major, Acanthopagus schlegeli, Oplegnathus fasciatus, and Girella punctata) in human cancer cell lines. Cytotoxic activity against the growth of human gastric adenocarcinoma (AGS) and HT-29 human colon cancer cell lines was determined using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Treatment with acetone/methylene chloride (A+M) and methanol (MeOH) extracts from the four sea bream species dose-dependently increased cytotoxicity against the growth of AGS and HT-29 cancer cells (p < 0.05). As shown by a cell viability assay, treatment with A+M and MeOH extracts from red sea bream (P. major) had the highest cytotoxic effect (p < 0.05) among the sea bream species. The IC50 values of an 85% aqueous methanol (85% aq. MeOH) fraction from red sea bream (P. major) against AGS and HT-29 cancer cells was 0.33 and 1.58 mg/ml, respectively, suggesting that the 85% aq. MeOH fraction had the highest cytotoxic effect among the fractions (p < 0.05). Our results demonstrate that four different sea bream species exhibited cytotoxic activity, as well as high-quality amino acids and fatty acids. Among the sea bream species, red sea bream (P. major) showed the greatest cytotoxic effect. The results could be used to improve nutrition information available to consumers.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.233-241
• /
• 2016

Experiments were carried out to quantify the topographic effects on attenuation of sunshine in complex terrain and the results are expected to help convert the coarse resolution sunshine duration information provided by the Korea Meteorological Administration (KMA) into a detailed map reflecting the terrain characteristics of mountainous watershed. Hourly shaded relief images for one year, each pixel consisting of 0 to 255 brightness value, were constructed by applying techniques of shadow modeling and skyline analysis to the 3m resolution digital elevation model for an experimental watershed on the southern slope of Mt. Jiri in Korea. By using a bimetal sunshine recorder, sunshine duration was measured at three points with different terrain conditions in the watershed from May 15, 2015 to May 14, 2016. The brightness values of the 3 corresponding pixel points on the shaded relief map were extracted and regressed to the measured sunshine duration, resulting in a brightness-sunshine duration response curve for a clear day. We devised a method to calibrate this curve equation according to sky condition categorized by cloud amount and used it to derive an empirical model for estimating sunshine duration over a complex terrain. When the performance of this model was compared with a conventional scheme for estimating sunshine duration over a horizontal plane, the estimation bias was improved remarkably and the root mean square error for daily sunshine hour was 1.7hr, which is a reduction by 37% from the conventional method. In order to apply this model to a given area, the clear-sky sunshine duration of each pixel should be produced on hourly intervals first, by driving the curve equation with the hourly shaded relief image of the area. Next, the cloud effect is corrected by 3-hourly 'sky condition' of the KMA digital forecast products. Finally, daily sunshine hour can be obtained by accumulating the hourly sunshine duration. A detailed sunshine duration distribution of 3m horizontal resolution was obtained by applying this procedure to the experimental watershed.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.86-94
• /
• 1994

This study was carried out to get information on the cause of low photosynthesis ofKorean ginseng, a shade plant. Photosynthesis, water content, stomatal conductance and water potential in leaves of ginseng and soybean were investigated. The light intensity for maximum photosynthesis was about $300{\mu}E\;/\;m^2\;/\;s^2$ in ginseng and about $800{\mu}E\;/\;m^2\;/\;s^2$ in soybean, respectively Photosynthesis was remarkably lower in ginseng than in soybean under the same light intensity and $temperature(at\;20^{\circ}C)$. Photosynthesis of detached leaves was stopped in shorter time in ginseng than in soybean particularly at high $temperature(30^{\circ}C)$. The decreasing rate of water content in detached leaves was slower in ginseng than that of soybean, while the remained water level in the leaves was much higher in $ginseng(70{\sim}71%)\;than\;in\;soybean(50{\sim}53%)$ when photosynthesis was stopped. Water content had a positive correlationwith photosynthesis in both plants. However, at the same water level, the ratio of photosynthesis to water content was remarkably lower in ginseng than In soybean. The relationship between the stomatal conductance and photosynthesis was significantly positive correlation in the both plants. The ratio of photosynthesis to stomatal conductance was similar in booth plants below about 40 $mmol\;/\;m^2\;/\;s\;at\;20^{\circ}C$. Water potential was remarkably lower in ginseng than in soybean, and waterpotential had a significantly positive correlation with water content, stomatal conductance and photosynthesis in both plant. These results suggested that the low stomatal conductance and low water potential might cause the low photosynthesis in ginseng compared to soybean.

• Journal of Korean Society of Forest Science
• /
• v.103 no.1
• /
• pp.87-97
• /
• 2014

This study was conducted to provide field-based harvesting study information which can be used to select an optimal cable system for certain work conditions on steep grounds (> $20^{\circ}$ ground slope) in Korea. To accomplish this study objectives, we evaluated three cable yarding systems (RME-300T tower-yarder, Chuncheon tower-yarder, FARMI tractor winch) working in typical work conditions for their yarding productivity and operational efficiency. Those yarders are commonly used for removing logs or trees on steep grounds in Korea. Under the same work conditions (average DBH of tree to be cut, 20 cm; yarding distance, 60 m; lateral yarding distance, 10 m; and machine utilization rate, 70%), the average productivities were $33.04m^3$/day, $38.47m^3$/day, and $14.17m^3$/day for RME-300T, Chuncheon tower-yarder, and FARMI, respectively. Our standardized cost comparison study also showed that the yarding cost was highest at $37,835won/m^3$ with FARMI, followed by RME-300T at $25,105won/m^3$ for the same work conditions. We found the lowest yarding cost with the Chuncheon tower-yarder at $20,520won/m^3$ which was resulted primarily from high yarding productivity at the yarding distance (60 m). Our analysis suggested that a small machine such as FARMI could be a low-cost yarding machine option for a cable yarding job with a short yarding distance (40 m or less). The Chuncheon tower-yarder is well suited for a mid-range yarding distance job in Korea, ranged between 40 to 140 m. If yarding distance were longer than 140 m, the RME-300T tower yarder appears to be most cost-effective.

• Journal of Korea Game Society
• /
• v.4 no.3
• /
• pp.11-20
• /
• 2004

Virtual reality that we have seen from the movies in 80's and 90's is hawing near based on the rapid progress of science together with a computer technology. Various virtual reality system developments (such as VRML, HMD FishTank, Wall Type, CAVE Type, and so on) and the advancement of those systems make for the embodiment of virtual reality that gives more sense of the real. Virtual reality is so immersive that makes people feel like they are in that environment and enable them to manipulate without experiencing the environment at first hand that is hard to experience in reality. Virtual reality can be applied to the spheres, such as education, high-level programming, remote control, surface exploration of the remote satellite, analysis of exploration data, scientific visualization, and so on. For some connote examples, there are training of a tank and an aeroplane operation, fumiture layout design, surgical operation practice, game, and so on. In these virtual reality systems, the actual operation of the human participant and virtual workspace are connected each other to the hardware that stimulates the five senses adequately to lend the sense of the immersion. There are still long way to go, however, before long it will be possible to have the same feeling in the virtual reality as human being can have by further study and effort. In this thesis, the basic definition, the general idea, and the kind of virtual reality were discussed. Especially, CAVE typed in reality that is highly immersive was analyzed in definition, and then the method of VR programming and modeling in the virtual reality system were suggested by showing the restoration process of Kyongbok Palace (as the content of the original form of the culture) that was made by KISTI(Korea Institute of Science and Technology Information) in 2003 through design process in virtual reality system. Through these processes, utilization of the immersive virtual reality system was discussed and how to take advantage of this CAVE typed virtual reality system at the moment was studied. In closing the problems that had been exposed in the process of the restoration of the cultural property were described and the utilization plan of the virtual reality system was suggested.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.362-371
• /
• 2012

Objective of this research was to secure the information on physical and chemical properties of peatmoss and coir dust. To achieve this, 6 kinds of peatmoss and 10 kinds of coir dust currently used in the country as the root medium components in plant factories were collected and analysed. The mean ${\pm}$ standard deviation (SD) of total porosity and container capacity in peatmoss and coir dust were $79.6{\pm}5.04$ and $83.6{\pm}6.18%$, and $69.9{\pm}10.17$ and $65.9{\pm}3.46%$, respectively. These indicate that peatmoss has higher water holding capacity than coir dust and the characteristics are highly varied among peatmoss. The 4 out of 5 kinds of peatmoss had lower than 10%, but coir dust had 12~26%, of air-filled porosity. The percentage of easily available water and buffering water in peatmoss and coir dust was 18~22 and 11~16% and 9~13 and 5.5~7.5%, respectively. These results indicate that precise irrigation is required when coir dust is used as the root medium. The ranges of pH and electrical conductivity (EC) were 3.46~4.17 and $0.137{\sim}0.253dS{\cdot}m^{-1}$ in peatmoss and 5.31~6.48 and $0.250{\sim}0.1.580dS{\cdot}m^{-1}$ in coir dust. However, $0.563{\pm}0.83dS{\cdot}m^{-1}$ in mean ${\pm}$SD of coir dust EC indicates that it is higher than that of peatmoss, and the coir dust are highly varied in EC. The cation exchange capacity of peatmoss was 3 to 4 times as high as that of coir dust. The coir dust had higher $NO_3$ and $PO_4$ and lower $NH_4$ than peatmoss. The K and Na concentrations in coir dust were extremely high indicating that these ions caused the rising in EC. The percentage of hot water and alkali extracts of peatmoss were 6.67~16.37 and 0~38%, whereas those of coir dust were 30.0~65.1 and 23.1~70.3%. These results mean that possible existence of growth inhibiting materials in coir dust.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.336-342
• /
• 2012

Inorganic materials were commonly used as container media in domestic plant factories. Objective of this research was to secure the information in soil physical and chemical properties of inorganic materials such as vermiculites and perlites. To achieve this, 12 gold and silver vermiculites from China, Zimbabwe, and South Africa and 5 perlites from China were collected based on the marketing grades (MG) in particle sizes and analyzed for determination of their characteristics. The percentage of particles larger than $710{\mu}m$, in China perlite MG 3~5 mm, China silver vermiculites MG > 8 mm and MG 3~8 mm were 99.9%, 99.8%, and 99.7%, respectively, which were much higher than 28.4% in China gold vermiculite MG 0.3~1.0 mm, 14.0% in perlite MG < 1.0 mm, and 12.6% of Zimbabwe silver vermiculite MG < 1.0 mm. The container capacities of perlite MG < 1.0 mm and South Africa silver vermiculite MG 0.25~1.0 mm were 72.0% and 71.1%, respectively. The air space in China silver vermiculite MG 3~8 mm was 49.3% which was higher than other materials tested. However, the China gold and silver vermiculites MG 0.3~1 mm had 3.5% and 2.4% in air space indicating that possible problems could occur in soil aeration when they are used for container media. The percentage of easily available and buffering water of China gold vermiculite MG 0.3~1 mm and perlite MG < 1.0 mm were the highest among test materials. The ranges of pH and electrical conductivity were 6.36 to 10.7 and 0.032 to $0.393dS{\cdot}m^{-1}$ in vermiculites and 7.78 to 8.62 and 0.030 to $0.041dS{\cdot}m^{-1}$ in perlite, respectively. The cation exchange capacity of China silver vermiculite MG 0.3~1 mm were $14.7cmol{\cdot}kg^{-1}$ that was 10 times as high as $0.34cmol{\cdot}kg^{-1}$ in perlite MG 1~2.5 mm. The vermiculites had the higher contents of exchangeable cations such as Ca, K, and Na, than those of perlites.