• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.485-497
• /
• 2009

In this paper, we described DVB-S2 system for mobility. cross layer coding technique are needed to maintain the performance in deep fading channel. Cross layer coding is divided into two kinds of level. First level is Physical layer coding and, second layer is link layer or upper layer coding. Fixed on DVB-S2 short frame coding method as a physical layer, we simulated the various coding method as an upper layer coding. Furthermore, we analyzed the performance of each coding method on according to mobile vehicle speed, data rate, interleaving memory size, and IP packet size.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.277-280
• /
• 2010

Network based on the OSI 7 Layer communication protocol is implemented, and the Internet TCP / IP Layer Based on the vulnerability is discovered and attacked. In this paper, using the programs on the network Layer Scanning conducted by the Layer-by each subsequent vulnerability analysis. Layer by Scanning each vulnerability analysis program to analyze the differences will be studied. Scanning for the studies in the program reflects the characteristics of the Scanning Features of way, and security countermeasures by each Layer is presented. The results of this study was to analyze its vulnerability to hackers and security for defense policy as the data is utilized to enhance the security of the network will contribute.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.63-68
• /
• 2003

The DC and RF characteristics of $In_{0.5}Ga_{0.5}P/In_{0.22}Ga_{0.78}As/GaAs$ p-HEMTs with a gate oxide layer of various thicknesses ($50{\;}{\AA},{\;}300{\;}{\AA}$) were investigated and compared with those of a Schottky-gate p-HEMT without the gate oxide layer. A prominent improvement in the breakdown voltage characteristics were observed for a p-HEMT having a gate oxide layer, which was implemented by using a liquid phase oxidation technique. The on-state breakdown voltage of the p-HEMT having the oxide layer of $50{\;}{\AA}$was ~2.3 times greater than that of a Schottky-gate p-HEMT. However, the p-HEMT having the gate oxide layer of $300{\;}{\AA}$ suffered from a poor gate-control capability due to the drain induced barrier lowering (DIBL) resulting from the thick gate oxide inspite of the lower gate leakage current and the higher on-state breakdown voltage. The results for a primitive p-HEMT having the gate oxide layer without any optimization of the structure and the process indicate the potential of p-HEMT having the gate oxide layer for high-power applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.473-476
• /
• 2003

This paper shows necessity of encapsulation layer to maximite flexibility of brittle indium-tin-oxide (ITO) on polymer substrates. And, Young's modulus (E) of encapsulation layer have an significant effect on external bending stress and the coefficient of thermal expansion (CTE) of that have a significant effect on internal thermal stress. To compare magnitude of total mechanical stress including both bending stress and thermal stress, the mechanical stress of triple-layer structure (substrate / ITO / encapsulation layer or substrate / buffer layer / ITO) can be quantified and numerically analyzed through the farthest cracked island position. As a result, it should be noted that multi-layer structures with more elastic encapsulation material have small mechanical stress compared to that of buffer and encapsulation structure of large Young's modulus material when they were externally bent.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.336-340
• /
• 2007

This paper proposes a multicast scheme over IEEE 802.16 networks which support multiple upper layer protocols such as ATM, IPv4 packets, IPv6 packets, IEEE 802.3 over IPv4 and so on. The multicast capabilities over IEEE 802.16 are important both control plane and data plane. The proposed multicast scheme can be divided into two types: direct mapping and indirect mapping. The direct mapping scheme is that layer 3 address is directly mapped into CID information which is used for connection identifier at IEEE 802.16 link layer. The indirect mapping scheme has two steps for mapping between layer 3 address and layer 2 CID. Firstly, a layer 3 address translates to Ethernet MAC address with group MAC address. Secondly, a group MAC address is mapped into CID. The mapping scheme depends on the upper layer protocols.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.518-521
• /
• 2003

Bi$_2$Sr$_2$Ca$_{n-1}$Cu$_{n}$O$_{x}$ superconducting thin films have been fabricated by atomic layer-by-layer deposition using IBS(Ion Beam Sputtering) method. During the deposition, 90 mol% ozone gas of typical pressure of 1~9 $\times$ 10$^{-5}$ Torr are supplied with ultraviolet light irradiation for oxidation. XRD and RHEED investigations reveal out that a buffer layer with some different compositions is formed at the early deposition stage of less than 10 units cell and then Bi-2201 oriented along the c-axis is grown.grown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1387-1394
• /
• 2000

The SSL(Secure Socket Layer) protocol is one of the mechanism widely used in the recent network system. The improved information security mechanism based on the SSL is designed in this paper. There are important four information security services. The first is the authentication service using the Certificate offered from the SSL(Secure Socket Layer), the second is the message confidentiality service using the DES encryption algorithm, the third is the message integrity service using Hash function, and the fourth is Non-repudiation service. Therefore, information could be transferred securely under the information security mechanism including Non-repudiation service especially designed in this paper.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.25-31
• /
• 2015

In this paper, we propose PEP based on cross-layer and network coding in digital video broadcasting-return channel via satellite (DVB-RCS) networks. In particular, we propose not only a scheme of cross-layer information exchange for interaction between TCP and the resource allocation (RA) scheme in the link layer but also a tuning algorithm for the TCP contention window (CWND) by using information on the RA in the link layer and the redundancy rate for network-coded packets. The simulation results show that TCP CWND can be adjusted by RA information in the proposed protocol. Furthermore, through the transmission of network-coded packets and the proposed CWND tuning algorithm, TCP throughput is enhanced in lossy environment due to user mobility without the unnecessary resource overhead.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3086-3096
• /
• 1999

To declare conformance of multi-protocol Implementation Under Test(IUT), every layer of the multi-protocol IUT should be tested. According to ISO9646, single-layer test method is applied to testing the highest layer of multi-protocol IUT and single-layer embedded test method is used for the layers by layer all the protocols in a multi-protocol IUT. This paper proposes a new method for testing a multi-protocol IUT. The proposed test method assumes that a multi-protocol IUT is under test and that the interfaces between the layers cannot be controlled or observed by the tester. We apply the proposed test method to TCP/IP and compare the application results with those of the existing test turns out that the proposed test method significantly reduces the number of test cases as well as the number of test events while providing the same test coverage. In addition, the proposed test method shows the capability to locate the layer that is source of failure in testing multi-protocol IUTs.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.6
• /
• pp.422-433
• /
• 2015

In this paper, we demonstrate inter-layer prediction tools for scalable video coders. The proposed scalable coder is designed to support not only spatial, quality and temporal scalabilities, but also view scalability. In addition, we propose quad-tree inter-layer prediction tools to improve coding efficiency at enhancement layers. The proposed inter-layer prediction tools generate texture prediction signal with exploiting texture, syntaxes, and residual information from a reference layer. Furthermore, the tools can be used with inter and intra prediction blocks within a large coding unit. The proposed framework guarantees the rate distortion performance for a base layer because it does not have any compulsion such as constraint intra prediction. According to experiments, the framework supports the spatial scalable functionality with about 18.6%, 18.5% and 25.2% overhead bits against to the single layer coding. The proposed inter-layer prediction tool in multi-loop decoding design framework enables to achieve coding gains of 14.0%, 5.1%, and 12.1% in BD-Bitrate at the enhancement layer, compared to a single layer HEVC for all-intra, low-delay, and random access cases, respectively. For the single-loop decoding design, the proposed quad-tree inter-layer prediction can achieve 14.0%, 3.7%, and 9.8% bit saving.