• 한국작물학회지
• /
• 제39권5호
• /
• pp.426-430
• /
• 1994

참당귀 본포 이식시 묘의 중양에 따른 생육상황과 추대정도를 조사하고 추대에 대한 지상하부 형질간의 상관관계를 조사한 결과를 요약하면 다음과 같다. 1. 묘의 중양이 클수록 왕성한 생육을 보여 초장, 화서수, 추대율에서 유의성을 나타내었고 현재의 일반 관행묘보다 더 작은 소묘를 이식하므로서 16% 정도의 추대율 감소효과를 기대할 수 있었다. 2. 수양면에서는 이식 당귀묘의 중량이 클수록 추대율이 높아져 뿌리가 목질화되고 왜소하게 되어 근중이 적어지므로서 수량이 감소하는 경향을 보여 가급적 5g미만의 소묘가 좋을 것으로 사료되었다. 3. 지상하부 형질간의 상관관계를 보면 지상부형질간, 또는 지하부형질간에는 정의 상관을 보였으나 지상하부 형질간에는 부의 상관을 나타내었다. 4. 추대율과 높은 상관관계를 갖는 형질은 초장, 엽수, 화서수 및 생체중 등이혀 추대에 의해 가장 영향을 받는 근형질은 근중이었다.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.843-852
• /
• 2019

In the present study, we established a comprehensive dataset of dose coefficients (DCs) of the new meshtype ICRP reference computational phantoms (MRCPs) for idealized external exposures of photons and electrons with the Geant4 code. Subsequently, the DCs for the nine organs/tissues, calculated for their thin radiosensitive target regions, were compared with the values calculated by averaging the absorbed doses over the entire organ/tissue regions to observe the influence of the thin sensitive regions on dose calculations. The result showed that the influences for both photons and electrons were generally insignificant for the majority of organs/tissues, but very large for the skin and eye lens, especially for electrons. Furthermore, the large influence for the skin eventually affected the effective dose calculations for electrons. The DCs of the MRCPs also were compared with the current ICRP-116 values produced with the current ICRP-110 reference phantoms. The result showed that the DCs for the majority of organs/ tissues and effective dose were generally similar to the ICRP-116 values for photons, except for very low energies; however, for electrons, significant differences from the ICRP-116 values were found in the DCs, particularly for superficial organs/tissues and skeletal tissues, and also for effective dose.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.342-348
• /
• 1996

This paper describes the formulation for the vibration analysis of cylindrical shells with stiffeners by the transfer influence coefficient method. This method was developed on the base of the concept of the successive transmission of dynamic influence coefficients. The simple computational results from a personal computer demonstrate the validity of the present method, that is, the numerical high accuracy and the flexibility of programming, are compared with results of the transfer matrix method. It is also confirmed that the present algorithm could provide the solutions of high accuracy for system with a number of intermediate rigid supports. And all boundary conditions and the intermediate stiff supports such as intermediate rigid supports between shell and foundation can be treated only by adequately controlling the values of the spring constants.

• Communications for Statistical Applications and Methods
• /
• 제24권3호
• /
• pp.317-324
• /
• 2017

An influence measure known as Cook's distance has been used for judging the influence of each observation on the least squares estimate of the parameter vector. The distance does not reflect the distributional property of the change in the least squares estimator of the regression coefficients due to case deletions: the distribution has a covariance matrix of rank one and thus it has a support set determined by a line in the multidimensional Euclidean space. As a result, the use of Cook's distance may fail to correctly provide information about influential observations, and we study some reasons for the failure. Three illustrative examples will be provided, in which the use of Cook's distance fails to give the right information about influential observations or it provides the right information about the most influential observation. We will seek some reasons for the wrong or right provision of information.

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.128-135
• /
• 2006

Rational dynamic modeling and analysis method f3r complex structures are studied with special attention to slide way joints. For modeling of slide way joints, a general modeling technique is used by using the influence coefficients method which is applied to the conversion of detailed finite element model to the equivalent reduced joint model. The theoretical part of this method is illustrated and the method is applied to the structure with slide way joint. In this method, the non-linearity of the contact surfaces is considered within a proper range and the boundary effect of the joint model could be eliminated. The proposed method was applied to finite element modal analysis of a clamp jointed cantilever beam and slide way joints of the vertical type lathe. The method can also be used to other kinds of joint modeling. The results of these analysis were compared with those of Yoshimura models and rigid joint models, which demonstrated the practical applicability of the proposed method.

• 소음진동
• /
• 제4권4호
• /
• pp.469-478
• /
• 1994

This paper desfcribes the formulation for the analysis of the free vibration of a circular cylindrical shell with elastic supports by the transfer influence coefficient method. This method was developed on the base of the concept of the successive transmission of dynamic influence coefficients. The analysis algorithm for circular cylindrical shell elastically restrained by springs, which plays an important role in many industrial fields, is discussed. The supporting springs have the axial, circumferential, radial and rotational spring constants uniformly distributed along the circumference of the shell. The simple computational results on a personal computer demonstrate the validity of the present method, that is, the numerical high accuracy, the high speed analysis method and the flexibility for programming, compared with results of the transfer matrixmethod and reference. We also confirmed that the present algorithm could obtain the solutions of high accuracy for system with a number of intermediate rigid supports. And we could easily treat the intermediate support and all boundary conditions by adequately varying the values of spring constants.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.447-458
• /
• 2009

Energy loss at manholes, often exceeding friction loss of pipes under surcharged flow, is considered as one of the major causes of inundation in urban areas. Therefore, it is necessary to analyze head loss at manholes, especially in case of surcharged flow. Hydraulic experiments were conducted with three cases. Case A is to test whether the shapes of the manholes influence head loss coefficients. Case B and C were proposed to further reduce head losses by improving the manhole hydraulic efficiency. In case B, the joining part of the pipe at both shapes of manholes is shifted from central part to side part. The test in case C is to check the average head loss coefficient by installing the side benching in square manhole, based on shifted joining part model. The average head loss coefficient for circular and square manhole on case A was 1.6. This did not show much difference of the head loss coefficients in spite of the discharge variation in this case. However, case B and C show large difference between head loss coefficients due to the strong oscillation of water surface and the horizontal swirl motion. The circular and square manholes in case B reduced the head loss by 30% and 6% than ones in case A, respectively. The average head loss coefficient for circular manhole in case B was 1.1. Case C reduced average loss coefficients of the square manhole in case A from 1.6 to 1.1. Accordingly, the circular manhole in case B and the square manhole in case C showed the effective way to reduce the head loss. These head loss coefficients could be available to apply to the urban sewer system with surcharged flow.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2390-2398
• /
• 2002

For integrity analysis of nuclear reactor pressure vessel, including the Pressurized thermal shock analysis, the fast and accurate calculation of the stress intensity factor at the crack tip is needed. For this, a simple approximation scheme is developed and the resulting stress intensity factors for axial semi-elliptical cracks in cylindrical vessel under various loading conditions are compared with those of the finite element method and other approximation methods, such as Raju-Newman's equation and ASME Sec. Xl approach. For these, three-dimensional finite-element analyses are performed to obtain the stress intensity factors for various surface cracks with t/R = 0.1. The approximation methods, incorporated in VINTIN (Vessel INTegrity analysis-INner flaws), utilizes the influence coefficients to calculate the stress intensity factor at the crack tip. This method has been compared with other solution methods including 3-D finite clement analysis for internal pressure, cooldown, and pressurized thermal shock loading conditions. The approximation solutions are within $\pm$2.5% of the those of FEA using symmetric model of one-forth of a vessel under pressure loading, and 1-3% higher under pressurized thermal shock condition. The analysis results confirm that the VINTIN method provides sufficiently accurate stress intensity factor values for axial semi-elliptical flaws on the surface of the reactor pressure vessel.

• Wind and Structures
• /
• 제20권3호
• /
• pp.449-468
• /
• 2015

Current wind-resistance designs of large-scale indirect dry cooling towers (IDCTs) exclude an important factor: the influence of the ventilation rate for radiator shutter on wind loads on the outer surfaces of the tower shell. More seemingly overlooked aspects are the effects of various ventilation rates on the wind pressure distribution on the tower surfaces of two IDCTs, and the feature of the flow field around them. In order to investigate the effects of the radiator shutter ventilation rates on the aerodynamic interference between IDCTs, this paper established the numerical wind tunnel model based on the Computational Fluid Dynamic (CFD) technology, and analyzed the influences of various radiator shutter ventilation rates on the aerodynamic loads acting upon a single and two extra-large IDCTs during building, installation, and operation stages. Through the comparison with the results of physical wind tunnel test and different design codes, the results indicated that: the influence of the ventilation rate on the flow field and shape coefficients on the outer surface of a single IDCT is weak, and the curve of mean shape coefficients is close to the reference curve provided by the current design code. In a two-tower combination, the ventilation rate significantly affects the downwind surface of the front tower and the upwind surface of the back tower, and the larger positive pressure shifts down along the upwind surface of the back tower as the ventilation rate increases. The ventilation rate significantly influences the drag force coefficient of the back tower in a two-tower combination, the drag force coefficient increases with the ventilation rate and reaches the maximum in a building status of full ventilation, and the maximum drag coefficient is 11% greater than that with complete closure.

• 전자공학회논문지CI
• /
• 제46권1호
• /
• pp.56-63
• /
• 2009

최근에는 인터넷 환경에서 여러 형태의 압축된 파일이 이용되고 있으며 통신량의 감소, 통신시간의 절약 등 많은 장점을 가지고 있다. JPEG 압축의 경우, 양자화는 영상의 압축을 달성하기 위해 중요한 과정중의 하나이다. 일반적인 신호처리에서 양자화는 연속적인 아날로그 신호를 이산적인 디지털 신호로 변환하는 것이 주요 목적이다. 하지만 JPEG에서의 양자화는 시간영역의 픽셀 값 또는 주파수 영역의 계수 값의 크기를 줄이는 역할을 한다. 많은 압축 기법 그리고 압축 기법에서 동작하는 영상처리기법들이 개발되어 지고 있다. 정보 은닉에서도 JPEG과 같은 압축파일에서 동작하는 알고리즘이 개발되어 지고 있다. 우리는 이 논문에서 정보은닉 처리과정에서 생겨나는 데이터 변경의 영향을 예측하기 위한 방법을 제안하였다. JPEG과 같은 압축 환경에서 정보 은닉 시 적용 가능한 몇 가지 중요한 사실을 여러 경우의 실험을 통하여 얻어냈다. 이러한 사실들은 현재 존재하는(Matrix Encoding, Modified Matrix Encoding 등을 포함한 F3, F4 and F5 알고리즘 등) 정보은닉 프로그램의 성능향상, 알고리즘 처리시간의 감소와 같은 긍정적인 효과를 거둘 수 있다.