Browse > Article

Finite Element Modeling of Contact Joints by Flexibility Influence Coefficient  

Cho Seong-Wook (중앙대학교 기계공학부)
Oh Je-Taek (중앙대학교 대학원 기계공학부)
Publication Information
Journal of the Korean Society for Precision Engineering / v.23, no.6, 2006 , pp. 128-135 More about this Journal
Abstract
Rational dynamic modeling and analysis method f3r complex structures are studied with special attention to slide way joints. For modeling of slide way joints, a general modeling technique is used by using the influence coefficients method which is applied to the conversion of detailed finite element model to the equivalent reduced joint model. The theoretical part of this method is illustrated and the method is applied to the structure with slide way joint. In this method, the non-linearity of the contact surfaces is considered within a proper range and the boundary effect of the joint model could be eliminated. The proposed method was applied to finite element modal analysis of a clamp jointed cantilever beam and slide way joints of the vertical type lathe. The method can also be used to other kinds of joint modeling. The results of these analysis were compared with those of Yoshimura models and rigid joint models, which demonstrated the practical applicability of the proposed method.
Keywords
Finite Element Analysis; Contact Joint; Flexibility Influence Coefficient; Machine Tools;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Yoshimura, M. and Okushima, K., 'Measurement of Dynamic Rigidity and Damping Property for Simplified Joint Models And Simulation by Computer,' Annals of CIRP, Vol. 25, No.1, pp. 193-198, 1977
2 Yoshimura, M. and Okushima, K., 'Computer-Aided Design Improvement of Machine Tool Structure Incorporating Joint Dynamic Data,' Annals of CIRP, Vol. 28, No.1, pp. 24 - 246, 1979
3 Cho, J. H., Kim, H. W., Ahn, M. D. and Choi, Y. H., 'Dynamic Analysis of Composit Structures with Contact Joints using Flexibility Influence Coefficient Method,' Proceedings of the KSPE Fall Conference, pp. 528 - 533, 1997
4 Choi, Y. H., Shin, J. H. and Park, J. K., 'Dynamic An ayisis of Heavy Duty Grinding Machine Structures w ith Joints,' Proceedings of the KSPE Fall Conference, pp. 608 - 614, 1995
5 Kang, C. H., 'Machine Tool Technology - Present and Futur (1),' Journal of KSPE, Vol. 12, No.4, pp. 5 - 18, 1995
6 Slocum, A.H.,'Precision Machine Design,' PrenticeHall International Editions, pp. 421 - 550, 1992
7 Woo, J. W., 'Structural Analysis of Machine Tool Structures using Stiffness Modeling of Joints,' MS Thesis, Chung-Ang University, pp. 5 - 33, 2000
8 Lee, G. B. and Park, S. J., 'Study of Design and Estimation of Quality Evaluation Technology for Modem Machine Tools,' KIST Workshop on Machine Tools, pp. 35 - 43, 2000
9 Bathe, K. J., 'Finite Element Procedures,' PrenticeHall, pp. 125 - 223, 1996
10 ANSYS Corp, 'ANSYS User's Manual,' ANSYS Corp., Vesion 7.0, pp. 1 - 250, 1999
11 Lee, J. W., 'Dynamic Analysis of Composite Structures with Joints,' PhD Thesis, Seoul National University, pp. 12 - 25, 1993