• Structural Engineering and Mechanics
• /
• v.63 no.1
• /
• pp.55-64
• /
• 2017

The paper concerns concrete carbonation, the phenomena that occurs in every type of climate, especially in urban-industrial areas. In European Standards, including Eurocode (EC) for concrete structures the demanded durability of construction located in the conditions of the carbonation threat is mainly assured by the selection of suitable thickness of reinforcement cover. According to EC0 and EC2, the thickness of the cover in the particular class of exposure depends on the structural class/category and concrete compressive strength class which is determined by cement content and water-cement ratio (thus the quantitative composition) but it is not differentiated for various cements, nor additives (i.e., qualitative composition), nor technological types of concrete. As a consequence the selected thickness of concrete cover is in fact a far estimation - sometimes too exaggerated (too safe or too risky). The paper presents the elaborated "self-terminated carbonation model" that includes abovementioned factors and enables to indicate the maximal possible depth of carbonation. This is possible because presented model is a hyperbolic function of carbonation depth in time (the other models published in the literature use the parabolic function that theoretically assume the infinite increase of carbonation depth value). The paper discusses the presented model in comparison to other models published in the literature, moreover it contains the algorithm of concrete cover design with use of the model as well as an example of calculation of the cover thickness.

• Journal of Korea Multimedia Society
• /
• v.20 no.12
• /
• pp.1992-1999
• /
• 2017

This study proposes a decorative typeface which is produced through the concept of trigonometric functions in an open-source programming language known as Processing. First, the theoretical background of Processing and trigonometric functions as well as previous research in this area are analyzed. Second, basic modules of 'V', 'I', 'O', and 'M' were created for use as the final alphabet typeface with the concept of a trigonometric function. Third, a decorative parabolic curve that encircles the base module was created. Finally, the modules created on Processing were edited in Adobe Illustrator to create a typeface set with characters from A to Z. Various artworks using Programming can produce an infinite number of different versions by modifying only some of the variables and codes, and this method can include multimedia features such as text, images, videos, interactive art and various forms of content and media. Therefore, with regard to expression, the possibilities are endless. In this study, I attempt to expand the field of visual culture using programming and computational methodologies. In contrast to the digital typeface production method, which relies on existing graphic tools, this study is meaningful because it expands the range of use of decorative typefaces.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.2
• /
• pp.1-15
• /
• 2003

Buttons in general reflect the culture of the society, and their values depend on practicality, decorative feature, and symbolism. Their infinite potential enables us to attempt various original changes in formative factors such as forms, patterns, colors, materials and sizes. In addition new styles, methods, and techniques are tried to show that the decorative feature becomes stronger today than it did in the past when the function was more important. Now buttons are not only a factor of clothing but have value as composite art works reflecting the pride, idea and culture of a nation. Moreover consumers' interest in new designs increases everyday as the moderns' desire for unique individuality rises. Button designs of Korea, however, are still far behind in the aspects of materials, qualities, and methods, facilities, and scale of production. And uniform mass production prevails without the buttons of creative and artistic values made due to the lack of specialized designers. Therefore it seems necessary to carry out historial studies simultaneously with the rising interest in button designs now. Prior to developing new designs, the study will examine those of western buttons that are the origin, going through relevant literature and data to define the characteristics of each era and type. It may provide basic data for developing the backward button designs of Korea.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.4
• /
• pp.47-51
• /
• 2009

The slope failure in the country is caused by mainly rainfall and its type is reported shallow slope failures in general. To investigate the cause of slope failure, the unsaturated soil slope behavior in accordance with rainfall amount studies actively, but there are little studies related the slope erosion and scour by rainfall. The slope erosion and scour by rainfall cause environmental pollution and slope instability, however there are few methods to effectively control them. This research analyzed experimentally how infinite gradients are infiltrated according to the changes of amount of rainfall and the slope of gradients by manufacturing the model of gradient in order to investigate how rainfall infiltrates regarding homogeneous gradients and slope protection method. For this, this experiment measured and analyzed discharge, storage rate occurring in gradients by going on changing amount of rainfall, slope of gradients.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.892-896
• /
• 2001

Investigation is performed on the stability of nonlinear system under turbulent fluid motion modelled as white noise random process, which is a preliminary result in the course of research on the characteristic and nonlinear control of the stochastic system. Adopted physical model is beam-type structure with tip-mass and main base mass. The governing equation is derived via F-P-K approach in stochastic sense. By means of Gaussian Closure method infinite dynamic moment equations due to system nonlinearity is closed to finite one. At the best of authors' knowledge, it is the first trial to design nonlinear controller by using of sliding mode technique in stochastic domain and control performance and effect in stochastic domain is studied.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.4
• /
• pp.49-57
• /
• 2009

In this paper we consider the specific types of the generalized continuous-time Lyapunov equation and the existence of solution. This is motivated to analyze the system stability in situations where descriptor system has infinite eigenvalue. As main results, firstly the necessary and sufficient condition for stability of the descriptor system with index one or two will be proposed. Secondly, for the general case of any index, the similar condition for stability of descriptor system will be proposed with the specific type of the generalized Lyapunov equation. Finally some examples are used to show the validity of proposed methods.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.543-550
• /
• 2016

The Active Superconducting Current Controller (ASCC) is a new type of Superconducting Fault Current Limiters (SFCL) which can limit the fault current in different modes. It also has the particular abilities of compensating active and reactive powers for electrical networks. In this paper, it is confirmed that the performance of ASCC in different operating modes introduces a limiting impedance in series with the network which can even degrade the transient stability and the operation of the Over-Current Relays (OCR) employed in a power system. In addition, the model of a three-phase ASCC is simulated, and the effect of descriptive modes on the current limiting level is investigated. For the transient stability analysis, a single machine-infinite bus system is tested, and the effect of operation modes is studied based on an equal area criterion obtaining the critical time and the critical angle. Modifying the setting parameters of OCR such as time dial and pick-up current, the protective coordination is also studied in different operating modes.

• Journal of the Korean Society of Costume
• /
• v.62 no.6
• /
• pp.139-153
• /
• 2012

To prolong the rapid progress of IT, it is necessary to develop contents through IT convergence among the existing goods & service and process areas to create new added-values. In particular, the wedding dress industry has infinite potential in utilizing various contents like virtual fitting by connecting with newly compelling IT areas such as smart phones, Augmented Reality (AR), and application contents. In the meantime, a large scale of the wedding industry has gained global competitiveness due to consulting expertise and the influence of the Korean Wave, whereas most small-sized wedding dress shops in Korea fall short of developing wedding dress designs and receiving relevant information. Accordingly, the purpose of this study was to help brides who have difficulties in choosing a wedding dress by decreasing their time and effort by providing wedding dress designs and information, according their desired image, body type, and circumstances through the utilization of virtual fitting application contents. Not only that, this study aims to diversify and specialize in wedding information and to help users to set a guideline for wedding dresses that are most suitable for them. Moreover, this study has an academic meaning in proposing an interdisciplinary convergence research model through the study of wedding dress design development, AR, and application contents utilization.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.10
• /
• pp.1062-1067
• /
• 2015

Floating architecture is a type of building that is geographically located on a sea or a river. It floats under the influence of buoyancy, and does not have an engine for moving it. Korea is a peninsula surrounded by sea except on the north side, so floating architectures have been mainly focused on two points: solving the issue of small territory and providing various leisure & cultural spaces. Floating architectures are expected to save energy effectively, if they use sea water heat, which is known to be clean energy with infinite reserves. To use sea water heat as the heat source and/or heat sink, this study proposes a model in which a sea water heat exchanger is embedded in the concrete structure in the lower part of the floating architecture that is submerged under the sea. Based on the results of performance evaluations of the sea water heat exchanger using CFD (computational fluid dynamics) analysis and mock-up experiments under various conditions, it is found out that the temperature difference between the inlet and outlet of the heat exchanger is in the range of $3.06{\sim}9.57^{\circ}C$, and that the quantity of heat transfer measured is in the range of 3,812~7,180 W. The CFD evaluation results shows a difference of 5% with respect to the results of mock-up experiment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.415-423
• /
• 2012

This paper specifies on optimized design of wide-band subarray using a Genetic Algorithm. First wide-band radiator was designed at triangle lattice of infinite array structure. It is the radiator of notch type that has a wide-band characteristic of ratio 2:1 between maximum and minimum frequency satisfying active reflection coefficient under -10 dB at boresight. And a Genetic Algorithm was applied to optimize subarray partition of antenna consisting of 1,100 array elements. It was confirmed that an optimized subarray antenna has a 4.5-5.5 dB more improved maximum SLL (Side-Lobe Level) than regular subarray antenna.