• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.67-74
• /
• 2014

Recently, the number of road construction is increasing by industrial development. According to this industrial tendency, the number of traffic accidents are consistently increasing due to increasing number of vehicle on the road. This is mainly because traffic accidents are occurred by various parameter such as negligence of driver, vehicle defects, state of unstable road, natural environment etc. Lane department of vehicles from guardrail is occurring frequently. This type of accident is caused by vehicle performance improvement and shape of vehicle, weak guardrail installation and maintenance. Guardrail has the purpose on prevention such as prevention of traffic accident and prevention of deviating out of road, minimizing damage of driver and vehicle by collision as well as entry into the road through guardrail. Stability evaluation test of guardrail verifies the behavior of guardrail through the crash of truck. At this time, the crash condition has 100 km/h of velocity and $15^{\circ}$ of impact angle. In the case of ground condition, filling slope condition has relatively high bearing capacity of infinite ground towards the test. Guardrail is generally installed on road of shoulder in fill slope in korea. It is possible for stability problem to deteriorate ground bearing capacity in Guardrail in fill slope. The existed study towards stability of guardrail has been carried out in the infinite ground. However, the study on the behavior of fill slope with guardrail is not performed by vehicle collision. Therefore, In this study, the numerical analysis using LS-DYNA was executed for verification on behavior of fill slope with guardrail through vehicle collision. This numerical analysis was carried out with change of embedded depth on installed guardrail post in shoulder of fill slope by vehicle collision and 8 tonf truck crash providing at NCAN (National Crash Analysis Center). As the result, displacement and stress on fill slope are decreased in accordance with the increase of embedded depth of guardrail post. Ground bearing capacity is deteriorated at depth of 450 mm form shoulder of road on fill slope.

• Economic and Environmental Geology
• /
• v.14 no.3
• /
• pp.111-122
• /
• 1981

This study is a model analysis for an effective application of the geophysical prospecting to the investigation of geological structures or useful resources, and the purpose of it is to research a property of the electrical resistivity prospecting, especially by using a Three-Point electrode array method. In using the Three-Point electrode array method, it is theoretically assumed to choose the infinite for a distance between the two current electrodes, however it is impossible in applying to the practical field prospecting. Therefore this study was conducted for determination and presentation of a minimum appropriate distance between the two current electrodes by making a study on prospecting effect in the variation of distance between both the electrodes. In case that the ratios of the distance between the two current electrodes to that between the two potential electrodes are respectively chosen for 40, 400, 5,000, the experimental data of this study showed that the minimum appropriate distance between the two current electrodes is forty times as much as that between two potential electrodes. In order to make clear a problem about prospecting depth which is essential to the data processing, it had been chosen equally to the distance between two potential electrodes. As a result of it, it was shown that the anomaly is appeared along the position of an assumed ore body. Consequently it was found out that the prospecting depth of the Three-Point electrode array method is the same as the distance between the two potential electrodes. From the model experiment on the sheeting ore body(or linear structure) of horizontal, dipping of $30^{\circ}$, $60^{\circ}$ and vertical on the basis of above experimental condition, it was found out that the position and dip of assumed ore body could be inferred from the aspects of the equiresistivity curve. In consequence of performing out the simultaneous Normal and Reversal electrode movement, it was shown that the electrode movement of the Reversal forms the anomaly more clearly than that of Normal when the sheeting ore body is situated obliquely, therefore it could be ascertained that the electrode movement have to be performed simultaneously in the manner of Normal and Reversal. It was also exhibited that the aspect of the equiresistivity curve forms symmetrically when an assumed ore body (or linear structure) is situated horizontally or vertically, that is, symmetrically, and moreover that the aspect of the equiresistivity curve forms unsymmetrically when an assumed ore body (or linear structure) is situated obliquely. On the basis of these experimental analysis it is thought that it can be inferred from the aspect of equiresistivity curve whether an assumed ore body is obliquely situated or not.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.3 s.116
• /
• pp.104-119
• /
• 2006

The eastern rear business complex of the Gwangyang Harbor (second stage) has undergone the 'alternative bid' process by which a construction company is selected based on their suggestions for an alternative plan and the bid for the construction expenses is based on the previously completed original plan, thereby implicitly accepting the arrangement and scale of the park which was presented in the original plan. It is possible, however, that the concept and plan of each park needs to be approached in a new way within the extent of given design guidelines. This study focuses on the alternative plan process and the Symbol Park (the second neighborhood park) and Waterfront Park (the third neighborhood park) among the five neighborhood parks in the eastern rear business complex (second stage). These two parks provide scale and function for the structure of the park and greenways system at the eastern rear complex. The neighboring waterway is a significant resource for emphasizing the pre-development features of the site. The alternative plan process focuses on determining the resources for the park's plan based on the environmental analyses of the site and utilizing the results. That is, through an analysis of the current state, all available resources are determined and the facilities and activities are derived based on these results. By this, Symbol Park and Waterfront Park reflect the regional features of the eastern rear complex, and these parks will feasibly perform the role of the region's key parte. The limit of this study is the fact that there is no chance for landscape architecture to actively play a role in the creation of the master plan, land utilization plan, and plan for the complex. Therefore there is a problem that the function scale and location of the park are not distributed appropriately in the rear complex. Also the plan for protecting the waterway's shore, a significant resource, only considers the structural stability of the engineering works, degrading the visual and ecological quality. These experiences will be used as a case for further designing the industrial complex and for the resulting park plan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.551-561
• /
• 2017

This study attempts to determine the strategy to improve the quality of staff supervision by exploring the experiences of the staff supervision in community welfare centers. For this purpose, multiple case study was performed by conducting in-depth interviews with 10 supervisors for the analysis data and analyzing the resulting themes. The key subjects from their experience were 'Supervisors recognize and prepare the supervision as Challenge and Aspiration', 'Supervision leaves only chaos and frustration', and 'Inspiration from the supervisor and infinite effort result in fruit'. Based on these results, this study suggests the following practical suggestions for the educational, administrative and supportive functions of Supervision. First, educational functions should be proposed as an extension of supervisor's education opportunities and manuals related to educational growth of supervision. Second, the administrative function should be changed to evaluate social welfare institution's evaluation framework so as to evaluate the supervision internal regulation and supervision according to it and various supervision models should be developed. Third, supportive supervision function that can be encouraged for supervisees should be enhanced. This study was meaningful because it presents specific suggestions for supervisors and supervisee's relation and situation in the community welfare center through the qualitative research method.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.3
• /
• pp.171-179
• /
• 2015

The objectives of this research have been focussed on 1) developing prediction techniques for the flash flood and landslide based on rainfall prediction data in agricultural area and 2) developing an integrated forecasting system for the abrupt disasters using USN based real-time disaster sensing techniques. This study contains following steps to achieve the objective; 1) selecting rainfall prediction data, 2) constructing prediction techniques for flash flood and landslide, 3) developing USN and communication network protocol for detecting the abrupt disaster suitable for rural area, & 4) developing mobile application and SMS based early warning service system for local resident and tourist. Local prediction model (LDAPS, UM1.5km) supported by Korean meteorological administration was used for the rainfall prediction by considering spatial and temporal resolution. NRCS TR-20 and infinite slope stability analysis model were used to predict flash flood and landslide. There are limitations in terms of communication distance and cost using Zigbee and CDMA which have been used for existing disaster sensors. Rural suitable sensor-network module for water level and tilting gauge and gateway based on proprietary RF network were developed by consideration of low-cost, low-power, and long-distance for communication suitable for rural condition. SMS & mobile application forecasting & alarming system for local resident and tourist was set up for minimizing damage on the critical regions for abrupt disaster. The developed H/W & S/W for integrated abrupt disaster forecasting & alarming system was verified by field application.

• The Journal of Fisheries Business Administration
• /
• v.18 no.1
• /
• pp.37-57
• /
• 1987

This article discussed the characteristics of several Pareto-optimal incentive contracts between owner and labor, more specifically, four situations: reporting output jointly observable by labor ana owner; reporting both output and effort; incorporating other endogenous elements (like capital) that affect the production process and Pareto-optimal fee schedules; and ascertaining the effects of private pre-decision information private- decision information, and per-contact informational asymmetries. Also presented were several extensions of the basic contractual model, and the different components of agency costs associated with labor-owner contractual relations. In a single-period model, the agency problem exists because the uncertainty prevents the owner from using the cash flow to determine unambiguously the labor's action. Holmstrom(1979) suggests that "when the same situation repeats itself over time, the effects of uncertainty tend to be reduced and dystunctional behavior is more accurately revealed, thus alleviating the problem of moral hazard. " Under these conditions, if the labor selects the first-best level of effect in each period, the cash flow will be independent and identically distributed over time. As the number of periods increases, the variance of the labows average output, if he selects the first-best level of effort in each period, gets smaller. Note that for this diversification effect to occur, it is necessary that the owner evaluate the labor's effort over the entire history of his employment, rather than evaluate each period's performance separately. Radner(1980) and Rubinstein and Yaari(1980) consider the extreme case in which there are an infinite number of observations. They show that the owner can eventually detect and systematic shirking on the part of the labor by comparing the labor's average output with what would be expected if the labor had been selecting the first-best level of effort in each period. In a dynamic model with incentive problems we have demonstrated that the labor's second-period compensation will depend on his first-period performance. This allows the owner to diversify away some of the uncertainty surrounding the labor's actions. In addition, this allows the owner to smooth the labor's income over time by spreading the risk of the first-period outcome over both periods. At least some unexplored avenves in this area invite future accounting research: situations where owner has different incompatible objectives and negotiates a contract with labor; circumstances in which owner deals with multiple objectives and negotiates contracts with several labors simultaneously; the value of costly accounting information systems and communication in establishing, Pareto-optimal incentive contracts, and the value and effects of inside information, Thorough theoretical or empirical research on each of these topics not only would increase our knowledge about the role and significance of accounting information but could also provide explanations of the inherent differences among various organizations and in their economic behavior. behavior.

• Journal of Broadcast Engineering
• /
• v.12 no.5
• /
• pp.391-400
• /
• 2007

The ways of expression are infinite to make animated film. When we compare to live action film, that fact is the actual power that animation only has and is one of the big weapons to appeal to the audience. Nonetheless, techniques to be chosen are monolithic like drawing, 3D computer, and clay when animation maker makes feature animation to screen in movie theatre. It's probably because feature animation must have popularity of visual style and they need to standardize technique about side of making. But popularity in expression does not mean monolithic visual style and making technique. It should be understood about side of artistic value to fascinate public audience. Audience is always eager for new subject, new directing style and new visual style. Monotonous and boring animation cannot but turn away from the audience. So if production does not have artistic value, we cannot expect commercial value and success also even it plans and makes for the feature animation. To create new visual style fnr animation is not only limited to artwork itself but also creation, which is included story and tone of the film and acting style about character. Also making process must be calculated and experimented to actualize that visual style about side of making.

• Journal of Veterinary Clinics
• /
• v.30 no.4
• /
• pp.258-263
• /
• 2013

The primary goal of this study was to compute sample sizes required to achieve the each aim of a variety of foot-and-mouth disease (FMD) surveillance programs, using a statistically valid technique that takes the following factors into account: sensitivity (Se) and specificity (Sp) of diagnostic test system, desired minimum detectable prevalence, precision, population size, and desired power of the survey. In addition, sample sizes to detect FMD if the disease is present and also as proof of freedom were computed. The current FMD active surveillance programs consist of clinical, virological, and serological surveillance. For the 2012 serological surveillance, annual sample sizes (n = 265,065) are planned at four separate levels: statistical (n = 60,884) and targeted (n = 115,232) at breeding pig farms and slaughter house, in together with the detection of structural proteins (SP) antibodies against FMD (n = 88,949). Overall, the sample size was not designed taking the specific aims of each surveillance stream into account. The sample sizes for statistical surveillance, assuming stratified two-stage sampling technique, was based to detect at least one FMD-infected case in the general population. The resulting sample size can be used to obtain evidence of freedom from FMD infection, not for detecting animals that have antibodies against FMD virus non-structural proteins (NSP). Additionally, sample sizes for targeted surveillance were not aimed for the population at risk, and also without consideration of statistical point of view. To at least the author's knowledge, sampling plan for targeted, breeding pig farms and slaughter house is not necessary and need to be included in the part of statistical surveillance. Assuming design prevalence of 10% in an infinite population, a total of 29 animals are required to detect at least one positive with probability of 95%, using perfect diagnostic test system (Se = Sp = 100%). A total of 57,211 animals needed to be sampled to give 95% confidence of estimating SP prevalence of 80% at the individual animal-level with a precision of ${\pm}5%$, assuming 800 herds with an average 200 heads per farm, within-farm variance of 0.2, between-farm variance of 0.05, cost ratio of 100:1 of farm against animals. Furthermore, 779,736 animals were required to demonstrate FMD freedom, and the sample size can further be reduced depending on the parameters assumed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.253-259
• /
• 1981

A study was made to find out a new method of calculating the survival rate of a fish population from length composition and growth equation. 1. In the steady state of the fish population, let the total mortality rate be z, the age of complete recruitment a, the oldest age in the catch b and the average between the age of complete recruitment and the oldest age in the catch Ut, then we have $$U_{t}\;=\;\frac{a-b\;{e xp}\{-z(b-a)\}}{1-\;{e xp}\{-z(b-a)\}}+\frac{1}{z}{\cdots}{\cdots}{\cdots}{\cdots}{\cdots}$$(1) And let b be infinite, then we obtain $$Z=\frac{1}{U_t-a}{\cdots}{\cdots}{\cdots}{\cdots}{\cdots}{\cdots}$$ (2) 2. Calculating numerical value of $U_t$ from age composition table and growth equation, and substitute in (1) for it, we may obtain the value of z and $e^{-z}$. 3. This method is applied to a case of mackerel and horse mackerel in the coastal waters of Korea, with the following results : Total mortality rate-Mackerel : 0.87909, Horse mackerel : 2.22327, Survival rate-Mackerel : 0.41516, Horse Mackerel : 0.10825, 95 percent confidence Interval of survival rate-Mackerel : $0.35966{\sim}0.47264$, Horse mackerel : $0.06897{\sim}0.14974$