• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권2호
• /
• pp.77-82
• /
• 2002

This Paper describes the dynamic load simulator for high-speed elevator system, which can emulate 3-mass system as well as equivalent 1-mass system. In order to implement the equivalent inertia of entire elevator system the conventional simulators have generally utilized the mechanical inertia(flywheel) with large radius, which makes the entire system large and heavy. In addition, the mechanical inertia should be replaced each time in order to est another elevator system. In this paper, the dynamic load simulation methods using electrical inertia are Presented so hat the volume and weight of simulator system are greatly reduced and the adjustment of inertia value can be achieved easily by software. Experimental results show the feasibility of this simulator system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.132-150
• /
• 2014

In this study, the inertial properties of fully filled liquid in a tank were studied based on the potential theory. The analytic solution was obtained for the rectangular tank, and the numerical solutions using Green's 2nd identity were obtained for other shapes. The inertia of liquid behaves like solid in recti-linear acceleration. But under rotational acceleration, the moment of inertia of liquid becomes small compared to that of solid. The shapes of tank investigated in this study were ellipse, rectangle, hexagon, and octagon with various aspect ratios. The numerical solutions were compared with analytic solution, and an ad hoc semi-analytical approximate formula is proposed herein and this formula gives very good predictions for the moment of inertia of the liquid in a tank of several different geometrical shapes. The results of this study will be useful in analyzing of the motion of LNG/LPG tanker, liquid cargo ship, and damaged ship.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.33-38
• /
• 2016

The turbocharger is an essential component to realize the engine down-sizing. The moment of inertia of turbocharger rotor is an important parameter with respect to acceleration performance of the vehicle. It can be calculated from the CAD software based the geometry data and the material properties. But the accurate value of the inertia of turbocharger rotor must be measured through the experimental method. In this study, the measurement of moment of inertia of turbocharger rotor for 2.0 L spark-ignition engine was carried out. First, an experimental equipment using a trifilar method was designed and fabricated. Some optical devices, that is, photo sensor, counter, convex lens, etc, were used to increase the accuracy of the measurement. Second, error sensitivity for the equipment was analyzed. The error of period time and the radius can give big affects to the accuracy of the moment of inertia. When the amount of error of these two were each 1.0 %, maximum error of the moment of inertia was under 3.0 %. Third, the calibration for the equipment was performed using a calibration rotor which has similar shape to turbine rotor but simple. Calculated value from CAD software and measured one for the calibration rotor were compared. The total error of the equipment and the measurement is about 1.3 %. This result shows that the equipment can give the good result with resonable accuracy. Finally the moment of inertia of the turbine rotor and compressor wheel were measured. The coefficient of variations, the ratio of standard deviation to mean value, were reasonably small at 0.57 % and 0.73 % respectively. Therefore this equipment is suitable for the measurement of the moment of inertia of the turbine rotor and compressor wheel.

• 전력전자학회논문지
• /
• 제10권5호
• /
• pp.436-442
• /
• 2005

본 논문에서는 전동기의 고성능 속도제어를 위해 필수적인 상수인 관성을 추정하는 알고리즘을 제안한다. 제안된 알고리즘은 속도관측기에서 발생되는 관성오차의 정보를 포함하고 있는 위치 오차신호를 관측하여 이를 비례적분 제어기를 사용하여 정상상태 오차를 없게 제어함으로써 관성을 추정하므로 특히, 관측기 기반 속도측정법에 쉽게 구현이 가능하다. 모의실험과 실험결과를 제시하여 추정관성이 제안된 방법에 의하여 실제값에 수렴하였으며 이에 파라 관측된 속도 역시 실제 측정된 속도와 일치하게 되었으며, 속도제어기가 설계한 응답특성을 보임을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1157-1164
• /
• 2003

Dynamic Load/unload (L/UL) mechanism is an alternative to the contact start stop (CSS) technology which eliminates stiction and wear failure modes associated with CSS. Other benefits of L/UL include increased areal density due to smooth disk surfaces, thinner overcoats, and lower head flying height Improved shock resistance due to elimination of head slap, and reduced power consumption. Inertia latch mechanism becomes important for mobile disk drives because of non operating shock performance. Various types of latch designs have been introduced in hard disk drives to limit a rotary actuator from sudden uncontrolled motion. In this paper, a single spring inertia latch is introduced for a small form optical disk drive, which uses a rotary actuator for moving an optical pick-up. A new small inertia latch with single spring is designed to ensure both feasible and small size. The shock performance of the new inertia latch is experimentally verified.

• 한국의류학회지
• /
• 제43권1호
• /
• pp.154-166
• /
• 2019

Consumers believe it is more profitable to buy products at a discount price than at a fixed price. However, consumers who miss an opportunity for a discount would experience regret; consequently, they may also forgo a purchase despite experiencing regret if a subsequent opportunity was no more attractive than the initial one. This phenomenon has been conceptualized as inaction inertia. In this study we investigate if consumers showed behavior of inaction inertia under the situation of fashion products purchase as well as if price and involvement had a moderating effect on product purchase. The following are the results of the research based on an empirical investigation. First, according to the results of influence of inaction inertia on purchase intention, respondents exposed to scenario of experiencing similar price discount in the past, both under high-price situations and low-price situations, made statistically fewer responses than those exposed to situations without such experience; therefore, effect of inaction inertia could be confirmed. Second, the moderating effect of product price on relationships between inaction inertia and purchase intention was not statistically significant.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.110-115
• /
• 1997

A modeling method for the bending vibration analysis of rotating Timoshenko beams with concentrated mass and mass moment of inertia is presented. The shear and rotary inertia effects become critical for the accurate estimation of the natural frequencies and modeshapes as the slenderness ratio decreases. The effect of the concentrated mass and mass moment of inertia on the natural frequencies are also investigated with the modeling method.

• 국제지역연구
• /
• 제21권2호
• /
• pp.143-169
• /
• 2017

본 논문에서는 1981년부터 2015년까지 거래소에 상장된 비-금융기업을 대상으로 자본구조의 관성이 어떻게 산업 간에 차이가 존재하며 이러한 차이가 상품시장 경쟁에 의해 설명될 수 있는지를 실증검증 한다. 본 논문의 실증분석 결과는 '보다 경쟁적 산업에 속하는 기업일수록 자본구조의사결정에 보다 더 관성적으로 하는 경향이 있다'는 것이다. 이러한 결과는 부채의 규율효과에 의해 설명되며, 상품시장경쟁에 대한 대체재로서 기여한다고 할 수 있다. 상품시장 경쟁이 낮을 때, 경영자는 자본구조의사결정과 관련하여 보다 능동적으로 의사결정을 하며 특히 잉여현금 흐름문제를 제약하기 위하여 부채를 사용한다는 것이다. 더욱이 거래비용이 얼마나 설명력이 있는지를 조사하며 자본구조관성에 대한 일반적인 설명이 되는지 파악한다. 본 논문의 결과는 기업의 자본구조에 관성현상이 존재하지만 미국 기업들만큼은 강하지 않았다. 둘째, 이러한 관성효과는 상품시장경쟁과의 관계를 통하여 강하게 나타나지만, OLS 추정모형에서 관성효과가 사라지는 현상이 나타났다. 이러한 결과는 거래비용이 자본구조의 관성을 설명하는 데 중요한 역할을 하지 않는다는 증거로 해석될 수 있다.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.88-96
• /
• 1998

The rattle noise is the most significant in many kinds of manual gearbox nioses, which is generated at the idle stage of the engine operation. The main torsional vibrat- ion source of the driveline is the fluctuation of the engine torque. The gear rattle is impacts generating in the backlash of the free gear due to this torsional vibration. Many researchers reported the clutch torsional characteristic optimization method to reduce the idle gear rattle but only few of them give sufficient consideration to the system parameters like gear backlash, drag torque, system inertia, inertia distribution, engine torque fluctuation, idle engine rotation speed, and accessory load. In this paper, influence rate of system parameters on the gear rattle is presented and counterplans like backlash reduction, drag torque increase, inertia addition, inertia distribution modification and engine torque characteristic control are suggested.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.410-415
• /
• 2004

Heavy-weight head slides may cause excessive inertia impact ＆ moment on the machine tool structure when they move or stop abruptly during operation. Consequently these inertia impact and unbalanced moment bring transient vibrations and rough sliding motions on the machine structure. Machine tool engineers have tried many kind of feed-slide designs in order to solve this problem; for example, the design optimization of the moving structure for minimum weight and maximum stiffness, box-in-box type slide design, and so on. In this article, force and moment equilibrium equations regarding to the inertia force ＆ moment were derived for each one of a mold M/C's head slides. Furthermore, five different design configurations of head slide assembly were reviewed for its design improvement regarding to force ＆ moment calculations and finite element structural analysis results.