• 멤브레인
• /
• 제24권4호
• /
• pp.325-331
• /
• 2014

새로운 구조를 가진 폴리이미드를 이용하여 고투과, 고선택성 불활성기체충진장치용 기체 분리막을 제조하였다. 높은 기체투과도와 용해도를 나타내는 무수물인 2,2-bis(3,4-carboxylphenyl) hexafluoropropane와 두 종류의 아민을 사용하여 신규 폴리이미드를 합성하였다. 투과도를 증가시키기 위해 2,3,5,6-Tetramethyl-1,4-phenylenediamine를 사용하였고, 선택도를 높이기 위해 여러 종류의 아민을 사용하였다. 화학적 이미드화 방법으로 공중합체를 준비되었으며 100,000 g/mol 이상의 평균 분자량을 나타내었다. 합성된 고분자의 열적 특성을 분석을 하기 위해 유리전이 온도($T_g$)와 열적 특성은 시차주사열량계(DSC)와 열중량분석기(TGA)로 측정을 하였으며, 유리전이온도($T_g$)는 $300^{\circ}C$, 열분해 온도는 $500^{\circ}C$가 넘어 뛰어난 열적 특성을 보였다. 기체투과도 특성은 time-lag 장비를 사용하였으며 그 결과, 일반 폴리이미드의 경우 대부분 기체투과도가 1 barrer 이하의 수치를 보이지만, 합성된 고분자의 경우 산소투과도 36.21 barrer과 산소/질소 선택도의 경우 4.1로 고투과 고선택도를 나타내어 불활성기체 충진장치용 장치로의 적용 가능성을 확인할 수 있었다.

• 멤브레인
• /
• 제28권6호
• /
• pp.406-413
• /
• 2018

OBIGGS에서는 대기 중의 미량의 오존이 고분자 분리막의 손상을 가져오기 때문에 전단에 오존 제거장치를 설치하여 분리막에 전해지는 기체에서 오존의 농도를 감소시켜 분리막의 손상을 막고 있다. 본 연구에서는 OBIGGS용 기체 분리막을 이용하여 오존 노출시간에 따른 인장강도와 기체투과특성을 평가하여 오존 노출환경과 투과특성의 관계를 확인하였다. 폴리이미드계와 폴리설폰계 두 종류의 중공사 분리막을 이용하였고, $6.37cm^2$의 유효 막 면적을 가지는 중공사 모듈을 제조하여 사용하였다. 오존 챔버를 이용하여 오존의 농도를 2-3 ppm으로 유지하였으며, 챔버 내의 기체를 펌프를 이용하여 모듈내로 지속적으로 공급하였으며, 오존 노출시간에 따라서 기체투과특성과 인장강도를 각각 평가하였다. 그 결과 폴리이미드계 중공사 분리막은 투과도에서 20%의 감소만 나타났을 뿐, 선택도와 인장강도에서 다른 큰 변화를 나타내지 않고 균일하게 유지되는 것을 확인하였다. 하지만 폴리설폰계 중공사 분리막을 사용하였을 때는 투과도가 80% 이상 감소하였고, 인장강도는 70% 이상 감소하는 결과를 나타내었다.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.70-78
• /
• 2012

The Annals of Joseon Dynasty, which recorded governmental affairs for 472 years (AD 1392-1863) during the Joseon dynasty is an representative paper cultural heritage in Korea. Being recognised their authenticity and values they were designated as the No 151 national treasure of Korea in 1973 and registered as 'The Memories of the World' by UNESCO in 1997. Unusually, some volumes of the Annals were treated by beeswax for the permanent preservation. However, the examinations on the deterioration of the beeswax-treated volumes had been exposed the serious damage than the untreated volumes. In particular, the larger amount of beeswax were worst in deterioration condition. In order to solve these problems, NRICH(National Research Institute of Cultural Heritage) of Korea launched the investigation study for the conservation of beeswax-treated volumes of the Annals. Now then, the five study areas have been set up; 1) to understand the damaged condition of the Annals; 2) to analyse the raw materials and production techniques; 3) to test the degradation degree using the duplication samples for understanding the aging factors and mechanism; 4) to develop the conservation techniques through dewaxing and thereafter strengthening the base paper of Hanji; 5) to develop the long-term storage technique using inert gases. On the basis of outcomes from this study, NRICH will plan to establish the systematic conservation and management plan for the beeswax-treated volumes of the Annals in future.

• 한국압력기기공학회 논문집
• /
• 제7권2호
• /
• pp.34-41
• /
• 2011

Wrought nickel-base superalloys are being considered as the structural materials in very-high temperature gas-cooled reactors. To understand the effects of impurities, especially oxygen, in helium coolant on the mechanical properties of Alloy 617, creep tests were performed in high temperature flowing He environments with varying $O_2$ contents at 800, 900, and $1000^{\circ}C$. Also, creep life in static He was measured to simulate the pseudo-inert environment. Creep life was the longest in static He, while the shortest in flowing helium. In static He, impurities like $O_2$ and moisture were quickly consumed by oxidation in the early stage of creep test, which prevented further oxidation during creep test. Without oxidation, microstructural change detrimental to creep such as decarburization and internal oxidation were prevented, which resulted in longer creep life. On the other hand, in flowing He environment, surface oxides were not stable enough to act as diffusion barriers for oxidation. Therefore, extensive decarburization and internal oxidation under tensile load contributed to premature failure resulting in short creep life. Limited test in flowing He+200ppm $O_2$ resulted in even shorter creep life. The oxidation samples showed extensive spallation which resulted in severe decarburization and internal oxidation in those environments. Further test and analysis are underway to clarify the relationship between oxidation and creep resistance.

• 공업화학
• /
• 제7권5호
• /
• pp.813-822
• /
• 1996

온실효과에 주요한 기여를 하는 이산화탄소를 줄이기 위하여 새로운 형태의 고분자인 폴리(알킬렌 카보네이트)가 합성되어졌다. 이산화탄소와 여러 가지 에폭시드로부터 칼복시산의 아연염을 촉매로 하여 교대 공중합체가 만들어졌다. 중합체의 수 평균 분자량은 50,000 정도이면 중합 분산도는 5~10 정도로 비교적 넓은 분포를 갖는다. 이 중합체는 비 결정성이고, 투명한 물질로써 열분해가 쉽게 일어난다. 높은 온도와 불활성 분위기 하에서도 완벽한 분해가 일어나 탄소 잔류물을 남기지 않는 것으로 알려졌다. 간단한 에폭시드와의 공중합체의 물리적인 성질을 개선하기 위하여 입체 장애가 큰 에폭시드와의 삼원 공중합체도 만들 수 있다. 이러한 분해성을 이용하여 세라믹, 금속, 전자 산업용 바인더나 lost-foam casting에 활용이 검토되었다. 또한 포장용 필름이나 가소제로의 활용도 연구될 수 있을 것으로 기대된다.

• 한국식품영양과학회지
• /
• 제14권3호
• /
• pp.229-234
• /
• 1985

The effect of packaging on the quality of dried anchovy was investigated, when packed with various materials and stored at different conditions. In cases of nitrogen gas substitution or addition of antioxidant, the reaction rates of lipid oxidation, the loss of available lysine and browning of the samples sealed in aluminum laminated film bag were lower than those packed in kraft paper or polyethylene film bag while the samples without gas substitution did not reveal any great differences in the rate of the reactions. The shelf-lives of the samples computed as a function of lipid oxidation were 90, 98 and 137 days at the storage of $35^{\circ}C$ for the packages of kraft paper, polyethylene and aluminum film respectively. And those at $55^{\circ}C$ storage for the same samples were 47, 51 and 77 days. The half-lives of available lysine loss were 227, 209 and 312 days at $35^{\circ}C$: 83, 83 and 147 days at $55^{\circ}C$ for the samples respectively. And the shelf-lives determined as a function of browning reaction were 26, 27 and 49 days at $55^{\circ}C$. The predicted shelf-lives at $25^{\circ}C$ as a function of lipid oxidation were 130, 140, and 189 days for kraft paper, polyethylene and aluminum laminated film packaging: 207, 229 and 246 days for the browning reaction, and 363, 339 and 415 days for the loss of available lysine. The results suggest that the protective effect of packaging on the reactions of lipid oxidation and browning could not be aided unless the air was expelled or replaced to inert gas.

• 한국분말재료학회지
• /
• 제13권4호
• /
• pp.285-289
• /
• 2006

Co-Fe-Ni-B-Si-Cr based amorphous strips containing nitrogen were manufactured via melt spinning, and then devitrified by crystallization treatment at the various annealing temperatures of $300^{\circ}C{\sim}540^{\circ}C$ for up to 30 minutes in an inert gas $(N_2)$ atmosphere. The microstructures were examined by using XRD and TEM and the magnetic properties were measured by using VSM and B-H meter. Among the alloys, the amorphous ribbons of $Co_{72.6}Fe_{9.8}Ni_{5.5}B_{2.4}Si_{7.1}Cr_{2.6}$ containing 121 ppm of nitrogen showed relatively high saturation magnetization. The alloy ribbons crystallized at $540^{\circ}C$ showed that the grain size of $Co_{72.6}Fe_{9.8}Ni_{5.5}B_{2.4}Si_{7.1}Cr_{2.6}$ alloy containing 121 ppm of nitrogen was about f nm, which exhibited paramagnetic behavior. The formation of nano-grain structure was attributed to the finely dispersed Fe4N particles and the solid-solutionized nitrogen atoms in the matrix. Accordingly, it can be concluded that the nano-grain structure of 5nm in size could reduce the core loss within the normally applied magnetic field of 300A/m at 10kHz.

• 한국산학기술학회논문지
• /
• 제18권11호
• /
• pp.124-129
• /
• 2017

본 연구에서는 철도차량의 경량 차체 소재로 주로 사용되는 알루미늄 합금 (Al-6005-T6) 압출재에 대한 마찰교반접합 적용 연구를 수행하였다. 용접속도를 300 mm/min으로 고정시킨 채 회전 공구의 회전속도를 600, 900, 1200, 1600 rpm으로 변화시킬 때 미세구조 및 기계적 특성의 변화에 대해 평가하였다. 특히, 동일 소재에 대해 전통적인 용접방법인 MIG 용접된 시편과의 비교를 통해 마찰교반접합법의 철도차량 적용성에 대해 논하였다. MIG 용접방법과는 달리, 마찰교반접합부에는 미세기공이 발견되지 않았으며, 경도 측정 결과 공구의 회전속도가 빨라질수록 높아진 입열량에 따라 heat affected zone (HAZ)의 범위가 넓어지고 결정립 조대화에 따라 HAZ의 경도 또한 낮아지는 것을 확인하였다. 인장시험 결과 HAZ지역에서 파단이 발생하였으며, 본 연구에서 설정한 공구의 회전속도 범위에서는 nugget 부의 경도 변화는 발견되지 않았으나 rpm이 올라갈수록 인장강도와 항복강도가 떨어지는 경향을 보였으며 이는 경도 시험에서와 같이 HAZ지역의 결정립 크기의 증가로 인한 현상으로 판단된다.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.18-25
• /
• 2016

The incandescent lamp is an electric light fixture with a tungsten filament heated to a high temperature, by passing an electric current through it, until it glows with visible light. The hot filament is protected from oxidation with a glass bulb that is filled with inert gas. The incandescent lamp has fire risk when combustible materials are close to its glass bulb. Because its lamp has the property which converts 90~95 percents of the electric power to heat energy. 2015 national fire statistics show that fires caused by lighting fixtures were 652 cases, and incandescent lamps(44 cases) and halogen lamps(53 cases) accounted for 15 percents in those of high heating light fixtures. Since incandescent lamp fires account for about 45 percents in the high heating light fixture, we could not overlook the fire risks by the incandescent lamp. Although many studies related with those have been conducted, incandescent lamp fires are continuously occurred. This study was carried out to study the fire risk of ignition of wood due to radiant heat of incandescent lamp. Radiant heat flux of the incandescent lamp was predicted by applying point source model, and critical distance for ignition of wood was calculated by applying integral model. The results from this study could applied to fire prevention activities related to light bulb, and it could be used in fire cause investigations related to radiant heat of incandescent lamp.

• Transactions on Electrical and Electronic Materials
• /
• 제3권2호
• /
• pp.10-15
• /
• 2002

In this paper, the electrical characteristics of fabricated p+-n junction diode are demonstrated and interpreted with different theoretical calculations. Dopants distribution by boron ion implantation on silicon wafer were simulated with TRIM-code and ICECaEM simulator. In order to make electrical activation of implanted carriers, thermal annealing treatments are carried out by RTP method for 1min. at $1000^{circ}C$ under inert $N_2$ gas condition. In this case, profiles of dopants distribution before and after heat treatments in the substrate are observed from computer simulations. In the I-V characteristics of fabricated diodes, an analytical description method of a new triangular junction model is demonstrated and the results with calculated triangular junction are compared with measured data and theoretical calculated results of abrupt junction. Forward voltage drop with new triangular junction model is lower than the case of abrupt junction model. In the C-V characteristics of diode, the calculated data are compared with the measured data. Another I-V characteristics of diodes are measured after proton implantation in electrical isolation method instead of conventional etching method. From the measured data, the turn-on characteristics after proton implantation is more improved than before proton implantation. Also the C-V characteristics of diode are compared with the measured data before proton implantation. From the results of measured data, reasonable deviations are showed. But the C-V characteristics of diode after proton implantation are deviated greatly from the calculated data because of leakage currents in defect regions and layer shift of depletion by proton implantation.