• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.785-798
• /
• 2018

Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.

• 산업경영시스템학회지
• /
• 제29권3호
• /
• pp.15-24
• /
• 2006

As Gyoto Agreement, the Climate Change Agreement, has become effective, total weight restriction on waste has started in each country and environment issue becomes one of the most important global issues. Therefore, environmental logistics became important matter, and industries need to establish production system for environmental conscious products and services. In this paper, we compare and analyze environmental conscious logistics activity(ECLA) that affect Carbon Dioxide Discharge(CDD) and packaging waste caused by logistics activity in Korea and Japan. We also propose the optimal alternative to the problem by this comparison and analysis.

• Industrial Engineering and Management Systems
• /
• 제10권2호
• /
• pp.115-122
• /
• 2011

This research considers a system containing a manufacturing firm who generates waste material during manufacturing process, and a disposal firm who collects and disposes the waste material. Identification of the optimal number of pick ups and the amount of waste to be disposed at certain period of time in terms of cost minimization is studied. Two types of waste accumulation rates, constant and linearly increasing, are discussed and mathematical models are developed. It can be shown that the results for these two different types of waste accumulation differ in a wide range because of the difference in the way of how waste is accumulated, which disturbs the storage cost. An integrated model is also developed and discussed in which both the manufacturing firm and the disposal firm benefit from the coordination between the two parties. It is shown that the optimal policy adopted by the integrated approach can provide a strong and consistent cost-minimizing effect for both the manufacturing firm and the disposal firm over the existing approach. Finally, all the models are verified by a numerical example and the results are compared.

• 대한공간정보학회지
• /
• 제16권1호
• /
• pp.75-81
• /
• 2008

본 연구의 목적은 공단지역의 환경개선과 폐수위탁관리체계의 투명성을 확보하기 위해 GIS를 활용한 공장폐수 위탁관리 시스템의 구축방안에 대하여 연구하는데 있다. 공장폐수 위탁 및 수탁처리 전산관리 시스템은 공장폐수 위탁 및 수탁관련 정보 입력과 위탁확인서 출력을 위한 위탁 및 수탁 관리 시스템, 관리자가 기간별, 업종별, 폐수종류별, 업체별 위탁량을 통계분석 할 수 있는 통계분석 시스템, 위탁 업체 및 수탁업체의 공간정보와 공장폐수 위탁량 및 수탁량 분포도를 시민들에게 제공하는 WebGIS 시스템으로 구성하였다. 구축된 공장폐수 위탁관리시스템은 폐수의 발생 시점에서부터 완전 처리까지의 전 과정에서의 정확하고 확실하게 파악할 수 있을 것으로 판단된다. 업무의 전산화로 업무처리 시 발생되는 시간적, 경제적 손실을 저감할 수 있을 것으로 판단된다. 또한 공장폐수에 대한 정확한 발생량을 관리함으로써 인천지역에서 발생되는 수질오염사고를 사전에 예방하고 오염사고 발생 시 신속한 대처방안을 도출 할 수 있을 것으로 판단된다. WebGIS를 이용`한 공장폐수의 위탁량 및 수탁량 분포를 관리함으로써 시민들의 환경오염에 대한 생각을 고취시키고 지속적인 관리가 가능 할 것으로 판단된다.

• 유기물자원화
• /
• 제23권1호
• /
• pp.63-69
• /
• 2015

본 연구는 포항철강산업단지를 대상으로 부산물 발생 현황과 현재까지 구축된 산업공생 네트워크를 분석하는데 목적을 두었다. 포항은 경상북도 시군 중 사업장 폐기물 발생량과 재활용 제외 폐기물 발생량이 모두 가장 높았으며, 대부분이 포항철강산업단지에서 발행하였다. 부산물 발생량을 조사한 결과 재활용을 제외한 폐기물 발생량의 대부분은 광재류가 차지하고 있으며 폐목재류, 분진류, 폐합성수지, 폐합성고무의 순으로 나타났다. 포항철강산업단지 입주기업간 구축된 부산물 거래 공생맵을 작성한 결과 부산물 중 폐내 화물 및 슬래그를 이용한 부산물 거래가 가장 활발하게 이루어지는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.440-448
• /
• 2002

산업의 발달과 더불어 폐유리의 발생량은 점차 증가되고 있다. 콘크리트에 폐유리를 사용할 경우 알칼리 실리카 반응(ASR)에 의한 팽창으로 콘크리트에 균열이 발생하여 성능저하를 일으킬 수 있다. 본 연구에서는 폐유리의 색깔(갈색, 녹색), 입도 및 폐유리로 인해 발생되는 ASR팽창을 저감시키기 위해 산업부산물의 종류(플라이애시, 고로슬래그 미분말)와 혼입율에 따른 ASR팽창과 강도특성을 분석하였다. 또한, 포졸란 재료로서 폐유리 분말의 사용가능성을 분석하였다. 연구결과, 폐유리의 색깔에 관계없이 폐유리의 퍼시멈 입도는 2.5~l.2mm로 나타났으며, 폐유리의 입도가 2.5~l.2 mm보다 작을수록 팽창은 점차 감소하는 것으로 나타났다. 또한, 폐유리에 산업부산물의 혼입은 ASR로 인한 팽창과 강도저하를 억제시키는데 효과적이며, 0.075 mm미만의 폐유리 분말이 포졸란 재료로서 적용이 가능한 것으로 나타났다.

• 자원리싸이클링
• /
• 제18권6호
• /
• pp.54-59
• /
• 2009

RDF 생산 기술은 국내 실정에 맞는 제조 설비로 자체 생산할 수 있는 단계이지만, 사업장 가연성 폐기물에 대한 연료화 설비가 구축된 사례는 드물다. 본 연구에서는 사업장 가연성 폐기물을 대상으로 한 RPF(Refuse Plastic Fuel) 제조 공정의 고형연료 제조 가능성에 대해 검토하였다. 고형연료는 폐합성수지, 폐지 및 폐목재의 지역별 폐기물 발생비율 기준으로 제조되었으며, 제조된 RPF의 물리적 특성을 조사하였다. 대경(대구, 경북)지역을 기준으로 제조된 RPF의 발열량이 가장 높게 나타났으며, 폐지와 폐목재의 첨가량이 늘어날수록 발열량은 감소하였다.

• 한국건축시공학회지
• /
• 제5권1호
• /
• pp.123-129
• /
• 2005

This study is as a part of the new disposal and recycling plans of heat-resource waste of Daegu dyeing industrial center we tried to examine applicable possibility of crushed thing(waste aggregate) as aggregates for mortar and concrete. To examine applicable possibility of waste aggregate as a lightweight-aggregate for concrete and mortar, we carried this study by mainly property examination of concrete according to replacement ratio of waste aggregate. We carried slump, unit weight, compressive strength and bending strength test according to replacement ratio of waste aggregate. As the result of that, if we use waste aggregate, lightweight of concrete and mortar will be possible. Specially it shows a strength improvement effect of cement hardening according to using this so it is judged that applicable possibility as aggregate for concrete and mortar is very excellent.

• 환경위생공학
• /
• 제14권1호
• /
• pp.70-79
• /
• 1999

A questionary survey was conducted to investigate citizen's attitude to treatment facilities of municipal solid waste in Miryang during 8. June of 1998 and 22 June of 1988. Collection effiencies was 86.7%, as 260 individuals of the 300 individuals. The survey showed that 43.0% of answers recognized seriousness of problem of the waste treatment and 33.1% of respondents concerned about recycle of organic waste. 40.8% of total answers said that they most hated landfill site among waste treatment facilities, and most citizens wanted as much distant as possible from waste treatment facilities. It was investigated that the greater part of respondents wanted the greatest compensation. About 58% of respondents was opposed to complete waste treatment facilities. 36.2$ among answers wanted establishment of waste treatment facilities in an industrial complex or an industrial area. The majority of respondents was willing to increase recycle rate and recognized seriousness of landfill site security. The majority of citizens do not trust environmental administration of Miryang City and they think that democracy and open of administration need for overcome MINBY.

• 자원리싸이클링
• /
• 제12권5호
• /
• pp.3-9
• /
• 2003

In order to prospect current recycling status in Korea, legislative system and policies relating to recycling, wastes generation and recycling rate were reviewed. Approximately 260,400 ton/day of wastes was generated in 2001. 48,400 ton/day of household waste and 212,000 ton/day of industrial waste. During the last ten years, waste management laws such as waste disposal law, recycling law and environment friendly industry law were prepared. In this article, concerning over waste generation and recycling, recycling law, Extended Producer Responsibility System and the problems and technological developments associated with recycling were summarized.