Browse > Article

A Study on the Characteristics of Waste Fuel Manufactured from Industrial Combustible Waste Generated in Youngnam Area  

Kang, Min-Su (Green Technology Service Center, Korea Institute of industrial Technology)
Kim, Yang-Do (School of Materials Science and Engineering, Pusan National University)
Ryu, Young-Bok (Green Technology Service Center, Korea Institute of industrial Technology)
Lee, Gang-Woo (Yoo Sung Company Limited)
Lee, Man-Sig (Green Technology Service Center, Korea Institute of industrial Technology)
Publication Information
Resources Recycling / v.18, no.6, 2009 , pp. 54-59 More about this Journal
Abstract
The level manufacturing technique for refuse derived fuel (RDF) is possible to produce them itself by a domestic process which is appropriate in Korea. However, very few facilities were used for industrial combustible waste. The objective of this research is to develop the technique for refuse plastic fuel (RPF) of industrial waste. RPFs were prepared by mixing of plastic, paper and wood based on amount of regional waste. The physical properties of the RPFs prepared were investigated. RPFs prepared at mixing ratio(plastic : paper : wood) of 87.55% : 8.15% : 4.3% show the highest lower heating values in wet-base (LHVW) and the LHVW decreases as the mixing ratio of paper and wood increases.
Keywords
Lower heating value; refuse plastic fuel; combustible waste; waste resource;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 류수호, 2009: 효율적인 자원순환사회 형성을 위한 자원 재활용 정책 고찰, 자원리싸이클링, 18(2), pp. 3-15
2 환경부, 2008: III. 시,도별 현황(폐기물 발생 및 처리현황), 2007전국 폐기물 발생 및 처리현황, pp. 47
3 환경부, 2003: 폐플라스틱 고형연료제품의 품질기준.사용처 등에 관한 기준, 환경부 고시 제 2003-127호
4 박주량, 오덕수, 서동천, 2004: 생활폐기물 중 가연성분의 화학적 특성 평가, 환경관리학회지, 10(40), pp. 321-327
5 So, H. J. et al., 2002: Study on the RDF Combustion Characteristics in Rolling-Great Type Small-Size Boiler, J. Korea Soc. of Waste Management, 19(5), pp. 534-541
6 환경부, 2008: 고형연료제품 품질 시험·분석방법, 환경부 고시 제2007-201호
7 김석준, 최연석, 2001: 국내외 RDF 제조 및 이용기술 현 황과 향후 기술동향, 한일 RDF 세미나 자료집, 삼성엔지니어링(주), pp. 119-153
8 Piao, G.. et al., 1998: Combustion of refused derived fuel in a fluidized bed, Waste Management, 18, pp. 509-512   DOI   ScienceOn
9 박상우, 장철현, 2008: 하수슬러지의 고형연료화 사례와 제품평가에 대한 고찰, 한국폐기물학회, 25(6), pp. 493-498
10 Piao, G.. et al., 2000: Combustion test of refused derived fuel in a fluidized bed, Waste Management, 20, pp. 443-447   DOI   ScienceOn