• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.479-482
• /
• 2007

For high performance driving carbon nanotube backlight units, their phosphor must be well studied. This paper experimentally evaluates their activating speed and persisting duration properties. They are proven to be the most efficiency related factors. High performance driving schemes are derived from them and implemented in this paper.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.89-95
• /
• 2017

This paper presents another maintenance policy for a group of units under finite operating horizon. A group of identical units are subject to random failures. Group maintenances are performed to all units together at specified intervals, and the failed units during operation are remained idle until the next group maintenance set-up. Unlike the traditional assumption of infinite operating horizon, we adopt the assumption of the finite operating horizon which reflect the rapid industrial advance and short life cycle of modern times. The units are under operation until the end of the operating horizon. Further, the operation of units are extended to the first group maintenance time after the end of the horizon. The total cost under the proposed maintenance policy is derived. The optimal group maintenance interval and the expected number of group maintenances during the horizon are found. It is shown that the proposed policy is better than the classical group maintenance policy in terms of total cost over the operating horizon. Numerical examples are presented for illustrations.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.799-806
• /
• 1995

In industrial field, a large volume of regenerants (acid and caustic soda) and their washing effluents are regularly disposed off from the water demineralization plant during regeneration of the ion-exchanger units. Of these waste effluents, a part of the wash water discharged from the single bed Anion and Mixed Bed units can be utilized at a certain stage of their washing cycles when its conductivity is fallen down and becomes considerably less than that of the input raw water. The main aim of this specific waste effluent utilization is to dilute the TDS concentration of the input raw water (fed into the single bed ion-exchanger units) by blending. The achievement is the increase of the longevity of the production cycles of the I.E. units along with the improvement of the production quality and decrease of the regeneration frequencies. As a result, regenerant consumption would be saved because of the reduction of ionic load in feed water which will ultimately reduce the water purification cost. At the same time, the environment pollution will also be protected to a considerable extent. This operational measure is quite effective and useful specially where high TDS water is demineralized only by single bed ion-exchangers. In such case, the water treatment plant is very often found to suffer from both production quality and quantity in addition to carrying out of random and restless regenerations. Proper reuses of the aforesaid wash water effluents of the Anion and MB units excellently minimizes the difficulties experienced in practice. This paper contains the utilities and techniques of reuses of the different kinds of waste effluents of the industrial water treatment plant in addition to the specific reuses of the post-regeneration wash waters of the Anion and MB ion-exchanger units.

• Journal of Korean Institute of Industrial Engineers
• /
• v.5 no.2
• /
• pp.21-36
• /
• 1979

Static muscle contractions when prolonged or frequently repeated result in discomfort, fatigue, and musculosketal injuries. An analytic and quantitative model has been developed in order to expand the working knowledge on muscle fatigue. In this paper, three Markov models of muscle fatigue are developed. These models are based on motor unit fatigue-recovery characteristics obtained from information on motor unit behavior as it relates to fatigue and graded exertions. Three successively more realistic models are developed that involve: (1) homogeneous motor units with intensity-dependent fatigue rates and state-independent recovery rates (the HMSI model); (2) homogeneous motor units, intensity-dependent fatigue rates and state-dependent recovery rates (the HMSD model); and (3) non-homogeneous motor units (i.e., Type S and Type F), intensity-dependent fatigue rates and state-dependent recovery rates (the HMSD model). The result indicate that a simple stochastic model provide a means to analyze the complex nature of muscle fatigue in sequential static exertions.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.3
• /
• pp.191-199
• /
• 2006

Effective management of business processes is a crucial issue to every enterprise in e-business environment. What's needed is a new framework of applications that can automatically manage distributed and heterogeneous business processes that span multiple functions of a company. In this paper, we propose technical design of a new enactment model that can coordinate such business process that involves multiple functional units or even multiple companies. In our approach, a process model is decomposed into several structural units, called 'process block', according to their procedural characteristics. Each of them is controlled by autonomous enactment units that can communicate with each other using a mutually agreed coordination protocol. The protocol takes the use of 'associative communication' concept, which allows the autonomy for each unit and secure the correctness of process execution.

• Journal of Applied Reliability
• /
• v.14 no.2
• /
• pp.114-121
• /
• 2014

An environmental test has been performed in order to improve the lifetime and reliability of the electrical units on aircraft. However, faults occurring in the field of aircraft have been difficult to predict and prevent, and new concepts for reliability testing are desired. Therefore, a composite reliability test sequence was proposed in the conventional studies. This study introduces test sequence guidelines based on relevant principles and considerations for electronic testing according to International Standard IEC-60068-1 and the United States Military Standard MIL-STD-810G. In addition, we analyze possible causes of failure using two-step QFD based on aircraft operation scenarios. Finally, the proposed test sequence can reproduce various and realistic failure modes for electrical units on aircraft.

• Journal of Korean Society for Quality Management
• /
• v.17 no.1
• /
• pp.11-18
• /
• 1989

A one-upper level warehouse n-Iower level retailer inventory distribution model is discussed. This paper presents the parallel-type inventory structure using an order-up-to-level invertory control system for analyzing the approximation of the expected units back ordered and the measure of service. We find that the total expected backorder units in system can substitute the expected back orders in the last two periods for the expected back orders in total periods. The rate of total expected back orders which is the measure of disservice, is given by dividing the improved units of total expected backorder into the total demand during an order cycle. The average annual total cost in system is obtained by considering the results, but from the viewpoint of this study the cost analysis is not described.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.110-124
• /
• 2007

In this study, the control efficiency of odorous compounds was measured from diverse control process units of 14 individual companies located within the Ban-Wall industrial complex of Ansan city, Korea (January to July 2005), To quantify the control efficiency levels of major odorous compounds, we collected odor samples from both the front and rear side of 17 control process units ($N=17{\times}2=34$). If the control efficiency is compared for each of 32 compounds between different process units, wet scrubber (WS) was found to be the most effective unit in terms of the sum of pollutants showing the positive control signals. Although the WS system shows generally a good control pattern for VOC, it is not the case for most index odorous pollutants; only 3 out of 12 index compounds were found to show positive control efficiencies. The results of the study also indicated that the control efficiency differ greatly between different industrial sectors and/or control process types. In the case of leather industry, carbonyl compounds were found to exhibit the highest control efficiency with its values varying from 19 to 90%. On the other hand, in the case of metal production sector, VOC recorded the maximum control efficiency with values varying from 18 to 79%. According to this study, most air pollution control facilities operated in most companies show fairly poor control efficiencies for most malodor compounds. Hence, to obtain best control efficiency of odorous pollutant emission, acquisition of better information on source characteristics and establishment of effective control technologies are highly demanding.

• The Korea Journal of Herbology
• /
• v.27 no.4
• /
• pp.9-16
• /
• 2012

Objective : Canavalia gladiata DC semen (CGS) have been used to improve hematopoietic activity. In the current study, we investigated whether CGS regulate hemato-potentiating function using hematopoietic stem cells (HSCs) as a testing system. Methods : HSCs isolated from femur in mice with leukopenia and thrombocytopenia induced induced by CTX. Then, Real-time PCR was performed to measure the mRNA expression and hematopoietic related gene (EPO, IL-3, SCF, c-kit, GM-CSF), the phoaphorylation of GATA-1 and STAT-5a/b were observed by ELISA method, and the number of granulocyte erythrocyte monocyte macrophage colony-forming units (CFU-GEMM) and erythroid burst forming units (BFU-E), semisolid clonogenic assay was performed. Result : When HSCs were treated with CGS, the expression of hematopoietic related genes (EPO, IL-3, SCF, c-kit, and GM-CSF) were significantly increased at the levels of mRNA as well as production in HSCs. Additionally, CGS enhanced phosphorylation of STAT-1 and signal transducer and activator of transcription-5a/b (STAT-5a/b) in HSCs. Furthermore, CGS significantly enhanced the growth rate of granulocyte erythrocyte monocyte macrophage colony-forming units (CFU-GEMM) and erythroid burst forming units (BFU-E) in vitro. Conclusion : These result suggest that CGS has hematopoietic enhancement via hematopoietic cytokine-mediated GATA-1/STAT-5a/b pathway.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.2
• /
• pp.1-6
• /
• 2006

This study proposes a new approach which combines Data Envelopment Analysis(DEA) and the Analytic Hierarchy Process(AHP) techniques to effectively evaluate Decision Making Units(DMUs). While DEA evaluates a quantitative data set, employs linear programming to obtain input and output weights and ranks the performance of DMUs, AHP evaluates the qualitative data retrieved from expert opinions and other managerial information in specifying weights. The objective of this research is to design a decision support process for managers to incorporate positive aspects of DEA's absolute numerical evaluations and AHP's human preference structure values. It is believed that a pragmatic manager will be more receptive to the results that include subjective opinions incorporated into the evaluation of the efficiency of each DMU efficiency. The WPDEA method provides better discrimination than the DEA method by reducing the number of efficient units.