• Korean Journal of Environmental Agriculture
• /
• v.21 no.4
• /
• pp.243-247
• /
• 2002

Irrigation water quality along Donjin river watershed was monitored to find a possible pollutant, for maintaining water quality to achieve food safety through water quality preservation of river. As a pollution indicators, such as Biological Oxygen Demand(BOD), Chemical Oxygen Demand(COD), Total Nitrogen(T-N), and Total Phosphate(T-P) in Dongjin river were examined from May to November in 2001. The results were as follows : The BOD level of Dongjin river ranged from 2.84 to 6.45 mg/L, which would be in a II$\sim$IV grade of the potable water criteria by Ministry of Environment. Averaged BOD level of downstream DJ6(After Jeongupcheon confluence) was 4.07 mg/L. The average COD level of Dongjin river ranged from 11.20 to 32.96 mg/L. COD level of DJ6 rapidly increased rapidly after the junction of Dongjin river and Jungupcheon because it showed the latter had relatively high pollution level. T-N content were significantly high in all sites of Dongjin river ranged through 4.16 to 5.84 mg/L. T-P examined high concentration than another thing point by 0.19 mg/L after Jeongupcheon confluence as BOD and COD. COD of main stream was expressed high concentration to dry season after rainy season. In case of T-P, pollution degree of dry season before rainy season appeared and examined that quality of water was worsened go by dry season after rainy season. The water quality of Dongjin river was deteriorated with inflow of Jungupcheon polluted by municipal and industrial sites near Jungup city.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.284-290
• /
• 2013

This study analyzed the geometric, compressive, cutting and friction properties of oriental melons in order to design a gripper capable of soft handling and a cutter for cutting oriental melon vine among the end effector of oriental melon as a preliminary step for developing the end effector of the robot capable of harvesting oriental melons in protected cultivation. As a result, the average length, diameter at the midpoint, weight, volume and roundness of the oriental melons were 108 mm, 70 mm, 188 g, 333 mL and 3.8 mm. Nonlinear regression analysis was performed on the equation $W=L^a{\times}D_2^b$ with variation of the length (L) and diameter (D2) of the weight (W) of the oriental melons. As a result, it was shown that there was a correlation between a of 2.0279 and b of -0.9998 as a constant value. The average diameter of the oriental melon vine was 3.8 mm, and most vines were distributed within a radius of 5 mm from the center. The average yield value, compressive strength and hardness of the oriental melons were $36.5N/cm^2$, $185.7N/cm^2$ and $636.7N/cm^2$, respectively. The average cutting force and shear strength of the oriental melon vines were $2.87{\times}10^{-2}\;N$ and $5.60N/cm^2$, respectively. The maximum friction coefficient of the oriental melons was rubber of 0.609, followed by aluminium of 0.393, stainless steel of 0.177 and teflon of 0.079. It was considered possible to apply it to the size of the gripper and cutter, turning radius, dynamics of drive motor and selection of materials and their quality in light of the position error and safety factor according to the movement when designing end effector based on the analyzed data.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.115-128
• /
• 2002

Dislike the tangent sections, the horizontal curve sections of roads should be designed, considering several factors : one of such factors is widening. In other words, since widening results from that when a vehicle runs on the horizontal curve sections, the rear wheels of the vehicle run not along with tracks of the front wheels but out of that, such offtracking should be exactly investigated and reflected in design of the curve sections. Especially in the case of industrial roads which semi-trailers and large trucks run frequently or arterial roads with small curve radiuses in mountainous regions. serious offtracking Phenomenons result in increasing the risk of accidents. decreasing the capacities and jeopardizing pedestrians' safety on the curve sections. For the offtracking, widening amounts of roads has been determined under the traditional presumption that vehicles run at a low speed and there is no superelevation. In fact, however, since the vehicles run at a high speed as well as at a low speed and the superelevation is installed on the horizontal curve sections in the structural aspect of roads, the existing standards for installing widening have a limitation to reflect exactly actual Phenomenons. In particular, for articulated wheel axles of a tractor and a trailer and long articulated vehicles, not only the offtracking degree is very high but also the interpretation shows different aspects from one of single axles. Comparing and reviewing the results of Korean and foreign studies related to the trailer offtracking model theory and the standards for installing widening, this study developed a realistic dynamic offtracking model which considers geometric structures of roads and speeds of vehicles, suggested how to measure widening with this model and examined applicability of the model. The findings of this study are as follows ; First. a dynamic offtracking model. which considers dynamic movements of a tractor and a trailer and the superelevation, was developed. Second, a new method to measure widening with the developed dynamic offtracking model was developed and a method to measure widening with swept path width was suggested as well. Finally, validity of the current standards for installing widening was examined by determining actual offtracking and widening amounts with the developed model and the applicability was investigated through the case studies. Compared with the existing offtracking models, the dynamic offtracking model developed in this study can reflect practically vehicle speed. dimension and geometric structural aspects of roads. In conclusion, the meaning of this study is that it reviews validity of the current standards for installing widening and provides a base to establish such standards by suggesting new methods to measure the widening with this dynamic offtracking model.

• The Journal of Industrial Distribution & Business
• /
• v.3 no.1
• /
• pp.7-16
• /
• 2012

Despite the enforcement of SSM control laws such as 'the Law of Developing the Distribution Industry (LDDI)' and 'the Law of Promoting Mutual Cooperation between Large and Small/medium Enterprises (LPMC)' stipulating the business adjustment system, the number of super-supermarkets (SSMs) has ever been expanding in Korea. In France, however, Super Centers are being regulated most strongly and directly in the whole Europe viewing that there is not a single SSM in Paris, which is emphasized to be the outcome from French government's regulation exerted on the opening of large scale retail stores. In France, the authority to approve store opening is deeply centralized and the store opening regulation is a socio-economic regulation driven by economic laws whereas EU strongly regulates the distribution industry. To control the French distribution industry, such seven laws and regulations as Commission départementale d'urbanisme commercial guidelines (CDLIC) (1969), the Royer Law (1973), the Doubin Law (1990), the Sapin Law (1993), the Raffarin Law (1996), solidarite et renouvellement urbains (SRU) (2000), and Loi de modernisation de l'économie (LME) (2009) have been promulgated one by one since the amendment of the Fontanet guidelines, through which commercial adjustment laws and regulations have been complemented and reinforced while regulatory measures have been taken. Even in the course of forming such strong regulatory laws, InterMarche, the largest supermarket chain in France, has been in existence as a global enterprise specialized in retail distribution with over 4,000 stores in Europe. InterMarche's business can be divided largely into two segments of food and non-food. As a supermarket chain, InterMarche's food segment has 2,300 stores in Europe and as a hard-discounter store chain in France, Netto has 420 stores. Restaumarch is a chain of traditional family restaurants and the steak house restaurant chain of Poivre Rouge has 4 restaurants currently. In addition, there are others like Ecomarche which is a supermarket chain for small and medium cities. In the non-food segment, the DIY and gardening chain of Bricomarche has a total of 620 stores in Europe. And the car-related chain of Roady has a total of 158 stores in Europe. There is the clothing chain of Veti as well. In view of InterMarche's management strategies, since its distribution strategy is to sell goods at cheap prices, buying goods cheap only is not enough. In other words, in order to sell goods cheap, it is all important to buy goods cheap, manage them cheap, systemize them cheap, and transport them cheap. In quality assurance, InterMarche has guaranteed the purchase safety for consumers by providing its own private brand products. InterMarche has 90 private brands of its own, thus being the retailer with the largest number of distributor brands in France. In view of its IT service strategy, InterMarche is utilizing a high performance IT system so as to obtainas much of the market information as possible and also to find out the best locations for opening stores. In its global expansion strategy of international alliance, InterMarche has established the ALDIS group together with the distribution enterprises of both Spain and Germany in order to expand its food purchase, whereas in the non-food segment, it has established the ARENA group in alliance with 11 international distribution enterprises. Such strategies of InterMarche have been intended to find out the consumer needs for both price and quality of goods and to secure the purchase and supply networks which are closely localized. It is necessary to cope promptly with the constantly changing circumstances through being unified with relevant regions and by providing diversified customer services as well. In view of the InterMarche's positive policy for promoting local partnerships as well as the assistance for enhancing the local economic structure, implications are existing for those retail distributors of our country.

• Korean Security Journal
• /
• no.59
• /
• pp.37-69
• /
• 2019

According to viewpoints of researchers and stakeholders, various opinions can be suggested on self-governing police system. Therefore, success of Korean self-governing police system will be defending on how to balance among conflicting values such as Empowerment, Political neutrality, Financial issues, Comprehensive competence in maintaining public safety. Before the launching of self-governing police system nation-wide, the experience of Jeju provincial police will be valuable model case. In specific, enlargement of work scope of self-governing police in Jeju province which has been introduced since last year will be a useful reference. There is more pessimism about self-governing police of Jeju province so far. However, this perspective is mostly based on the issue regarding hardwares such as manpower, equipment, law and organization. Issues regarding softwares such as organizational culture, operation system and work process need more attention to evaluate self-governing police system properly. To mark the first year after enlargement of work scope of Jeju police, this study demonstrate the overall result and implications of self-governing police of Jeju province based on documents, statistics, reports and media reports. In result, several preconditions are needed to implement the self-governing police system nation-wide successfully. 1. Strengthen the link between local government and local police 2. Establish the foundation for collaboration of state and local police 3. Enhance the aspect of citizen autonomy in local level 4. Reinforcing the capability of handling situation of state and local police 5. Invigorating the inter-organizational working group to operate self-governing police system effectively. The self-governing police system is unclosed topic to discuss. After this study, in-depth studies should be followed with more resources. Particularly, additional perspective including redundancy and equity need to be considered regarding self-governing police. By getting with the changes of macroscopic trends - lowbirth and aging, the fourth industrial revolution and possible reunification of north and south Koreas - these studies should suggest the long-term blueprint of self-governing police system of Korea.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.26-27
• /
• 2018

With entry into force of the Nagoya Protocol to promote the fair sharing of the benefits of accessing and utilizing genetic resources, much support has been given to research on the development of biomaterials and products using domestic natural resources. Conservation and resource-saving of native species became very important through Nagoya Protocol enactment. The trend of cosmetic industry has been shifing from use synthetic chemicals to natural biomaterials, due to the safety regulations on new materials, ban on animal experiments, and expansion of cosmeceuticals range. In addition, functional cosmetic range has been expanded from whitening, wrinkle improvement, and ultraviolet shielding, to hair loss, hair loss alleviation, acne relaxation, and moisturizing of atopic skin, thus causing the activation of research about field of efficacy evaluation on natural biomaterials and commercialization. Chungbuk province is fostering the bio industry as a key industry for regional economic growth. For this purpose, Osong Biotechnology Complex/Ochang Science Industrial Complex in middle area, Jecheon biovalley in northern region, and Chungju Enterprise city have been established, thus playing a pivotal role in Bio innovative cluster in Korea. In particular, it was established the osong cosmetics clinical research support center to develop the cosmetics industry in chungbuk, thereby supporting clinical trials, efficacy evaluations, overseas certification, and overseas market entry in order to advance into the global market. In addition, oriental plants such as astragalus propinquus, schisandra chinensis, eucommia, alpiniae oxyphyllae fructus and biancaea sappan are being actively studied as global cosmetic ingredients through the promotion of various national research and development projects using natural materials in chungbuk province. The chungbuk natural product industry is expected to grow further throughout cosmetics industry development in the future, as companies and research institutes are actively promoting the secure index of effective material in natural products and effective material commercialization.

• Journal of the Korea Concrete Institute
• /
• v.26 no.5
• /
• pp.651-660
• /
• 2014

Structural members using ultra high strength concrete which usually used with steel fiber is designed with guidelines based on several investigation of SF-RPC(steel fiber reinforced reactive powder concrete). However, there are not clear design method yet. Especially, SF-RPC member should be casted with steam(90 degree delicious) and members with SF-RPC usually used with precast members. Although the most important design parameter is development method between SF-RPC and steel reinforcement(rebar), there are no clear design method in the SF-RPC member design guidelines. There are many controversial problems on safety and economy. Therefore, in order to make design more optimum safe design, in this study, we investigated bond stress between steel rebar and SF-RPC according to test. Test results were compared with previously suggested analysis method. Test was carried out with direct pull out test using variables of compressive strength of concrete, concrete cover and inclusion ratio of steel fiber. According to test results, bond stress between steel rebar and SF-RPC increased with increase of compressive strength of concrete and concrete cover. Increasing rate of bond stress were decrease with increase of compressive strength of SF-RPC and concrete cover significantly. 1% volume fraction inclusion of steel fiber increase the bond stress between steel rebar and SF-RPC with two times but 2% volume fraction cannot affect the bond stress significantly. There are no exact or empirical equations for evaluation of SF-RPC bond stress. In order to make safe bond design of SF-RPC precast members, previously suggested analysis method for bond stress by Tepfers were evaluated. This method have shown good agreement with test results, especially for steel fiber reinforced RPC.

• Korean journal of applied entomology
• /
• v.57 no.3
• /
• pp.209-220
• /
• 2018

Mating disruption (MD) has been widely used to effectively control Grapholita molesta in apple orchards. A simultaneous mating disruption (SMD) techniques have been developed to control both G. molesta and G. dimorpha. This study was performed to determine the practical parameters to apply the SMD technique to field conditions. To determine the application amount of SMD lures, a dispenser containing 10 mg pheromone was placed at different numbers of trees in an orchard. Application at every other tree (= one dispenser per two trees) was relatively safe to expect effective MD efficiency in both wax and polyethylene (PE) formulations. One time application at the end of March was enough to maintain a year round MD efficacy against both species. A fence treatment using food trap was applied to prevent any immigratory mated females from nearby untreated regions. To enhance the food trap by adding host-derived secondary compounds, terpinyl acetate (TA) was screened to be effective to attract females of Grapholita molesta among six compounds contained in apple fruit extracts. Among different TA concentrations, 0.05% TA treatment was the most effective to attract the adults. A mixture of TA and sugar was effective to attract and kill females and called FAKT (female attract-to-kill techniques). FAKT was treated at approximately 6 m interval at the edge of the apple orchards. The females trapped by the FAKT included mated females possessing vitellogenic oocytes. SMD supplemented with FAKT maintained the high MD efficacy and significantly suppressed leaf damage induced by the two insect pests compared to control or single SMD treatment.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.171-182
• /
• 2018

Papaya (Carica papaya L.) is one of the crops widely planted in tropical and subtropical areas. The papaya fruit has low calories and are plentiful in vitamins A and C and in minerals. A major problem in papaya production is a plant disease caused by the papaya ringspot virus (PRSV). The first PRSV-resistant GM papaya expressing a PRSV coat protein gene was developed by USA scientists in 1992. The first commercial GM papaya cultivars derived from the event was approved by the US government in 1997. Development of transgenic papayas has been focused on vaccine production and limited agricultural traits, including insect and pathogen resistance, long shelf life, and aluminum and herbicide tolerance. Approximately 17 countries, including the USA and China, produced transgenic papayas and/or commercialized them, which provoked studies on biosafety assessment and development of GM-detection technologies. For the biosafety assessment of potential effects on human health, effects of long-term feeding to model animals have been studied in terms of toxicity and allergenicity. Studies on environmental safety assessment include influence on soil-microbial biodiversity and transfer to soil bacteria of GM selection markers. Many countries, such as Korea, the European Union, and Japan, that have strict regulations for GM crops have serious concerns about unintended introduction of GM cultivars and food commodities using unauthorized GM crops. Transgene- and/or GM event-specific molecular markers and technologies for genomics-based detection of unauthorized GM papaya have been developed and have resulted in the robust detection of GM papayas.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.703-710
• /
• 2010

In this study, a tactile stimulator was developed to resolve some problems from the previous version of the system such as system configuration, inappropriate stimulation control and additional problems. The developed tactile stimulator consists of control unit, drive unit and vibrator unit. The control unit was controlled by E-Prime software to generate appropriate vibration pulses. The drive unit supplies enough energy to the vibrator to generate effective stimulation pulses. The vibrator unit consists of small coin type vibrator and velcro, and was made to be attached at the hand easily. The developed tactile stimulator was designed by small-size, light-weight, low-power, simple-fabrication, max 35 channels and little delay time from instruction signal of E-Prime software to vibrator. The duration and magnitude of stimulation was controlled by 10 grades and the problems concerning stimulation control were compensated by wideband frequency ranges. Additionally, the electrical safety was ensured by low voltage operation. Vibrator was made to be attached on finger as well as on any part of the subject. Since this tactile stimulator is developed based on E-Prime software which is widely used in cognitive science, it is believed that this stimulator be suitable for the wide application of cognitive science study.