• Journal of Life Science
• /
• v.26 no.6
• /
• pp.689-697
• /
• 2016

Kefir is an acidic-alcoholic fermented milk product originating from the Caucasian mountains. Kefir has long been known for its probiotic health benefits, including its immunomodulatory effects. The objectives of this study were to investigate the properties of a fermented whey product and to examine the effects of kefir grains on the in vitro immune-modulation of human mast cell-1 (HMC-1). The results showed that the whey fermented by kefir grains contained the maximum lactic acid bacteria and yeast for 16 hr by 1.83×10⁸ and 6.5×10⁵ CFU/ml, respectively, and lactose and whey proteins were partially hydrolyzed. The experimental whey fermented by kefir grains exhibited an in vitro anti-inflammatory effect on the HMC-1 line for 8, 16, and 24 hr, and this effect induced the expression of interleukin (IL)-4 as a pro-inflammatory cytokine, but not for 48 hr by RT-PCR in HMC-1 cells. In addition, the same phenomenon was observed for the expression of IL-8 as a pro-inflammatory cytokine by the kefir-fermented whey during the same periods of 8-48 hr under the same conditions. These cytokines resulted in the production of IL-4 at 20-25 ng in HMC-1 cells for 8, 16, and 24 hr, whereas 5 ng was produced for 48 hr by the fermented whey. In contrast, IL-8 was produced at 15-20 ng in HMC-1 cells during 4, 8, 16, and 24 hr, while 7 ng was produced at 48 hr. It was concluded that the whey fermented by kefir grains possesses a potential anti-inflammatory function, which could be used for an industrial application as an ingredient of functional foods and pharmaceutical products.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2011

During the maintenance, repair and replacement process of circuit breaker, $SF_6$ reacted with input air in arc discharge, which led to the production of by-product gases (eg, $N_2$, $O_2$, $CF_4$, $SO_2$, $H_2O$, HF, $SOF_2$, $CuF_2$, $WO_3$). Among these various by-product gases, $N_2$, $O_2$, $CF_4$ is major component. Therefore, the effective separation process is necessary to recycle the $SF_6$ gas from the mixture gas containing $N_2$, $O_2$, $CF_4$. In this study, the membrane separation process was applied to recycle the $SF_6$ gas from the mixture gas containing $N_2$, $O_2$, $CF_4$. The concentration of $SF_6$ gas in gas produced from the electric power industry is over than 90 vol%. Therefore, we made the simulated gas containing $N_2$, $O_2$, $CF_4$, $SF_6$ which the concentration of $SF_6$ gas is minimum 90 vol%. From the results of membrane separation process of $SF_6$ gas from $N_2$, $O_2$, $CF_4$ $SF_6$ mixture gases, PSF membrane shown the highest recovery efficiency 92.7%, in $25^{\circ}C$ and 150 cc/min of retentate flow rate. On the other hand, PC membrane shown the highest recovery efficiency 74.8%, in $45^{\circ}C$ and 150 cc/min of retentate flow rate. Also, the highest rejection rate of $N_2$, $O_2$, $CF_4$ is 80, 74 and 58.9% seperately in the same operation condition of highest recovery efficiency. From the results, we supposed the membrane separation process as the effective $SF_6$ separation and recycle process from the mixture gas containing $N_2$, $O_2$, $CF_4$, $SF_6$.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.142-163
• /
• 2019

The purpose of this study is to analyze the effect of problem solving ability and satisfaction of university students who are pre-technology teachers in woodworking products(birdhouse) making program using design thinking. Survey responses are analyzed by statistical programs(SPSS ver.20) such as satisfaction, confidence in problem solving, difficulties and causes of difficulties according to gender and grade of 33 students who conducted experience programs in extra-curricular programs to improve creativity and problem solving ability. The main conclusions of this study are as follows: First, the average of total satisfaction about experience programs is 4.39, which is somewhat high. The highest average response is 'feelings of accomplishment' and 'advice in the surroundings'(M = 4.46). There is no significant difference between male and female, and grade. The students interest in group-based different birdhouse woodworking together with the help of the surrounding people by the process of design thinking rather than practice to follow. Therefore, I'd like to recommend to other students due to this program shows a high self-confidence, sense of accomplishment, and satisfaction. Second, the total average response of students 'self-confidence for problem solving at the group based making experience program using design thinking is 3.80. In result of group activities, the students have self-confidence of 'problem-solving ability and deal with difficult situations'. Later, in making programs, complementing difficulties of making can enhance the satisfaction of the students. Third, in the survey questionnaire related with problem solving ability confidence, between 'I have the ability to solve many problems' and 'I always have the ability to cope with new and difficult business situations' show the highest correlation. Therefore, in order to improve self-confidence of problem solving ability, it is necessary to prepare teaching learning programs that can strengthen problem solving ability. Fourth, in the new design and making process not a given product design, the most difficult step is 'the process of rework and modifying idea product'. The main reason that students have difficulty in the production process is 'lack of knowledge and ability to produce'. To make various woodworking products using design thinking process, it can be helpful to make works if you have enough training on woodworking and design thinking before product making. The students' satisfaction about team-based learning using design thinking that helps improving creativity and problem solving ability is high. Therefore, the result of the research in other making activity program that design thinking is applied and analyzed can improve students' problem solving ability.

• Science of Emotion and Sensibility
• /
• v.17 no.3
• /
• pp.129-142
• /
• 2014

Due to the increase of the aged population and population of the disabled today, there is a growing demand for rehabilitation medical instruments. Furthermore, there is a growing demand for evaluation indices for services that should be provided for uses of the rehabilitation medical instruments. In order to evaluate rehabilitation medical instrument designs in this study, the basic index for design evaluations shall be identified to search for assessment plans. Through this, new evaluation indices will be deduced through discussions and analysis of rehabilitation medical experts, biomedical engineers, and designers. The results of this study are summarized as follows. First, the existing design evaluation indices were collected and analyzed to construct 10 rehabilitation medical instrument design evaluation indices and 44 sub-evaluation items. These will be important evaluation standards for designing rehabilitation medical instruments in the future. Second, the design evaluation indices that must be taken into consideration when developing health care rehabilitation medical instruments are the 10 design evaluation indices of usability, cognition, safety, learning, motility, durability, economic feasibility, space, aesthetics and environmental aspects. Third, design evaluation indices of environment, space, cognition, usability, economic feasibility and aesthetics are indices that must be taken into consideration for product design, while learning, safety, motility and durability are factors that must be given special consideration for rehabilitation medical instrument design evaluation indices. Fourth, if existing product design evaluation indices placed importance on environment, space, cognition, usability, economic feasibility and aesthetics of products for design evaluation indices, rehabilitation medical instrument design evaluation indices placed importance on learning, safety, motility and durability on top of usability and economic feasibility, which are the differences between the design evaluation indices of rehabilitation medical instrument and other product designs. The 10 rehabilitation medical device design evaluation indices and 44 sub-evaluation items were carried out in this study. This research is only on the overall rehabilitation medical device design evaluation indices. In future research, the evaluation indices will be applied in the actual rehabilitation medical design device through production of prototypes, while making revisions and supplementations where necessary.

• Development and Reproduction
• /
• v.10 no.4
• /
• pp.263-269
• /
• 2006

To evaluate the potentiality of industrial use of cysteine proteinase inhibitor (cystatin) of tilapia egg and serum stability of the tilapia cystatin on low temperature storage and heat treatment was studied. When the eggs were stored at $4^{\circ}C$ for 3 days the cystatin activity was not changed much, while the supernatant of egg homogenate lost its cystatin activity significantly, remaining only about 65% of initial activity. When the eggs and serum were subjected to repeated freeze at $-20^{\circ}C$ and thaw at room temperature once a day, the egg cystatin was decreased after 5 cycles of freeze and thaw. However the serum cystatin was not changed by the 5 times repetition of freeze and thaw. More than 80% of egg cystatin activity was remained when the egg was heated at $35^{\circ}C$ for 30 min, but less than 10% was remained when heated at $50^{\circ}C$. On the other hand, the serum cystatin was very resistant to heat, remaining about 74% after heating at as high as $80^{\circ}C$ for 30 min. In summary, the egg cystatin was more stable when stored as intact form of egg rather than as supernatant of homogenate when stored at refrigeration. Egg cystatin was relatively stable against repeated freeze-thaw, and serum was found to be more stable in cysteine proteinase inhibitory activity than egg. Egg cystatin was not very resistant to heat treatment, while serum cystatin was quite resistant to high temperature heat treatment. These results suggest that tilapia egg and serum, especially the serum, would be a useful source for cysteine proteinase inhibitor in surimi production.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.285-292
• /
• 2017

We investigated physicochemical properties of puffed snacks with intermediate and high amylose rice varieties. The intermediate amylose rice varieties 'Sindongjin' and high amylose rice varieties newly developed for food processing, 'Dodamssal' and 'Goami4' were tested for this study. The crude fat and crude protein contents of the rice cultivars ranged 1.47-3.08% and 6.30-7.63%, respectively. The resistant starch and amylose contents of Dodamssal and Goami4 were higher than those of Sindongjin. The hardness of rice was the highest in Sindongjin and Dodamssal. Also, Hardness of puffed snacks decreased by 72.07% for Sindongjin, 88.21% for Dodamssal and 66.67% for Goami4 compared to raw rice samples. The sensory evaluation showed that the highest scores in taste, texture and overall acceptability of puffed snacks were obtained in Dodamssal. The results of this study indicate that Dodamssal was suitable varieties for puffed snacks. Also, the physicochemical properties of Dodamssal were improved by the extrusion process. Therefore Dodamssal can be used for the industrial production of puffed snacks.

• Journal of Animal Science and Technology
• /
• v.50 no.3
• /
• pp.391-400
• /
• 2008

Odor management is significantly concerned with sustainable livestock production because odor nuisance is a primary cause for complaint to neighbors. This study was conducted to measure the concentration of odorous compounds, odor intensity, and odor offensiveness at unit process in animal waste treatment facility combined composting and methane fermentation process by an instrumental analysis and direct olfactory method. Ammonia, sulfur-containing compounds, and volatile fatty acid were analyzed at each process units and boundary area in summer and winter, respectively. Higher concentration of odorants occurred in the summer than in the winter due to high ambient temperature. The maximum concentration of odorants was detected in composting pile when mixed manure was being turned followed by inlet, curing, outlet, and screen & packing process. Highest concentration of detected odorous compounds was ammonia ranging from 3.4 to 224.7 ppm. Among the sulfur-containing compounds measured, hydrogen sulfide was a maximum level of 2.3 ppm and most of them exceeded reported odor detection thresholds. Acetic acid was the largest proportion of VFA generated, reaching a maximum of 51 to 89%, followed by propionic and butyric acid at 1.9 to 35% and 1.8 to 15%, respectively. Malodor assessment by a human panel appeared a similar tendency in instrumental analysis data. Odor quotient for predicting major odor-causing compounds was calculated by dividing concentrations measured in process units by odor detection thresholds. In the composting process, hydrogen sulfide, ammonia, dimethyl sulfide, and methyl mercaptan were deeply associated with odor-causing compounds, while the major malodor compounds in the inlet process were methyl mercaptan, hydrogen sulfide, and butyric acid.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.78-83
• /
• 2014

In this research, we evaluated the performance and characteristics of carbon supported PtM (M = Ni and Y) alloy catalysts (PtM/Cs) synthesized by a modified polyol method. With the PtM/Cs employed as a catalyst for the oxygen reduction reaction (ORR) of cathodes in proton exchange membrane fuel cells (PEMFCs), their catalytic and ORR activities and electrical performance were investigated and compared with those of commercial Pt/C. Their particle sizes, particle distributions and electrochemically active surface areas (EAS) were measured by TEM and cyclic voltammetry (CV), while their ORR activity and electrical performance were explored using linear sweeping voltammetries with rotating disk electrodes and rotating ring-disk electrodes as well as PEMFC single cell tests. TEM and CV measurements show that PtM/Cs have the compatible particle size and EAS with Pt/C. When it comes to ORR activity, PtM/C showed the equivalent or better half-wave potential, kinetic current density, transferred electron number per oxygen molecule and $H_2O_2$ production(%) to or than commerical Pt/C. Based on results gained by the three electrode tests, when the PEMFC single cell tests were carried out, the current density measured at 0.6 V and maximum power density of PEMFC single cell adopting PtM/C catalysts were better than those adopting Pt/C catalyst. It is therefore concluded that PtM/C catalysts synthesized by modified polyol can result in the equivalent or better ORR catalytic capability and PEMFC performance to or than commercial Pt/C catalyst.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.908-915
• /
• 1998

By using Korean native soybean, traditional meju was prepared in Chuncheon, Kangweondo according to the traditional process. Analysis of physico-chemical, enzymatic and microbiological changes during meju fermentation were carried out in order to obtain a basic information for industrial scale production of meju. The enviroments for natural meju fermentation were $10{\sim}15^{\circ}C$ and $60{\sim}70%{\;}RH$. Moisture content decreased from 59% to 11% (exterior section) and 19% (interior section). the pH of meju rapidly increased up to 8.5 at $33^{rd}{\;}day$ of fermentation and thereafter decreased down to 7.9 at $70^{th}{\;}day$ of fermentation. Souble protein content was 1.47% at initial stage and increased up to $6.31{\sim}7.34%$ at $33^{rd}{\;}day$ of fermentation. Amino nitrogen content was $460{\sim}770{\;}mg%$ at $70^{th}{\;}day$ of fermentation. the color of meju became gradually black and decreased in redness and yellowness. During the process, protease and lipase seemed to play an important role in the digestion of soy protein and fat. Acidic protease activity increased up to $135.9{\sim}152.4{\;}unit/g$ at $33^{rd}{\;}day$ of fermentation and were $181.3{\sim}272.6{\;}unit/g$ at $70^{th}{\;}day$ of fermentation. Lipase activity increased up to 6 unit/g (interior section) and 15 unit/g (exterior section) at $70^{th}{\;}day$ of fermentation. the viable cell count of meju was at the level of $10^8{\;}CFU/g$ during the overall fermentation period. Aerobic halophilic count was $1.51{\times}10^7{\;}CFU/g$ at initial stage and maintained $10^8{\;}CFU/g$ level during the process. Initial anaerobic cell count was $2.0^9{\times}10^4{\;}CFU/g$ and increased up to $10^5{\;}CFU/g$ level at 47 days. Yeast and mold counts were $10^4{\sim}10^5{\;}CFU/g$ for the fermentation period.

• Korean journal of food and cookery science
• /
• v.28 no.4
• /
• pp.391-397
• /
• 2012

This study was carried out to investigate commercialization of Kimchi made of cabbage (Brassica oleracea var. capitata L.) using pre-fermentation conditions. The pre-fermentation conditions were 0, 18, 24, and 28 h at $20^{\circ}C$, and then the samples were stored at $10^{\circ}C$ to assess changes in quality characteristics. A comparison of the quality characteristics during storage showed that PF24 (pre-fermented cabbage Kimchi during 24 h at $20^{\circ}C$) and PF28 (pre-fermented cabbage Kimchi during 28 h at $20^{\circ}C$) had pH 4.47 and pH 4.23 on the second day of storage, respectively. It was possible to shorten the fermentation time to less than that of PF0 (not pre-fermented cabbage Kimchi at $20^{\circ}C$), by approximately 3 days. Total acidity was 0.26 to 0.29% immediately after making the Kimchi. However, PF0, PF18 (pre-fermented cabbage Kimchi during 18 h at $20^{\circ}C$), PF24 and PF28 became well-fermented when they were stored for 8~14 days, 3~10 days or 2~3 days. The number of lactic acid bacteria increased with the passage of time in all treatment groups regardless of fermentation conditions. However, the longer pre-fermentation time became, the faster the number of lactic acid bacteria increased. Most samples showed similar results late in the storage period; 7.2~7.4 log CFU/mL. PF0 had the greatest volume change 2.1 times increase late in the storage period. The sensory evaluation showed significant differences for flavor, taste, and overall acceptability after a partial storage period. PF28 stored for 2~3 days showed excellent flavor, and PF24 and PF28 stored for 2~3 days showed the highest scores of 6.27 to 6.67. The PF24 and PF28 treated samples were appropriate for commercializing small packed cabbage Kimchi and for alleviating the expansion problem of the packing material. However, because mass commercial production requires a large number of samples to be used at once, the results should be assessed for industrial product development in the future.