• Journal of Microbiology and Biotechnology
• /
• v.25 no.2
• /
• pp.185-195
• /
• 2015

Glucoamylase is an important industrial enzyme. Glucoamylase production by industrial Aspergillus niger strain featured with two major problems: (i) empirical substrate feeding methods deteriorating the fermentation performance; and (ii) the high raw materials cost limiting the economics of the glucoamylase product with delegated specification. In this study, we first proposed a novel three-stage varied-rate substrate feeding strategy for efficient glucoamylase production in a 5 L bioreactor using the standard feeding medium, by comparing the changing patterns of the important physiological parameters such as DO, OUR, RQ, etc., when using different substrate feeding strategies. With this strategy, the glucoamylase activity and productivity reached higher levels of 11,000 U/ml and 84.6 U/ml/h, respectively. The performance enhancement in this case was beneficial from the following results: DO and OUR could be controlled at the higher levels (30%, 43.83 mmol/l/h), while RQ was maintained at a stable/lower level of 0.60 simultaneously throughout the fed-batch phase. Based on this three-stage varied-rate substrate feeding strategy, we further evaluated the economics of using alternative carbon sources, attempting to reduce the raw materials cost. The results revealed that cornstarch hydrolysate could be considered as the best carbon source to replace the standard and expensive feeding medium. In this case, the production cost of the glucoamylase with delegated specification (5,000 U/ml) could be saved by more than 61% while the product quality be ensured simultaneously. The proposed strategy showed application potential in improving the economics of industrial glucoamylase production.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.502-522
• /
• 2022

Clay minerals are natural materials that show widespread applications in various branches of science, including environmental sciences, in particular the remediation of water contaminated with various water pollutants. Modified clays and minerals have attracted the attention of researchers in the recent past since the modified materials are seemingly more useful and efficient for removing emerging water contaminants. Therefore, modified engineered materials having multi-functionalities have received greater interest from researchers. The advanced clay-based materials are highly effective in the remediation of water contaminated with organic and inorganic contaminants, and these materials show enhanced selectivity towards the specific pollutants. The review inherently discusses various methods employed in the modification of clays and addresses the challenges in synthesizing the advanced engineered materials precursor to natural clay minerals. The changes in physical and chemical properties, as investigated by various characterization techniques before and after the modifications, are broadly explained. Further, the implications of these materials for the decontamination of waterbodies as contaminated with potential water pollutants are extensively discussed. Additionally, the insights involved in the removal of organic and inorganic pollutants are discussed in the review. Furthermore, the future perspectives and specific challenges in the scaling up of the treatment methods in technology development are included in this communication.

• Journal of Life Science
• /
• v.29 no.8
• /
• pp.846-853
• /
• 2019

Phytochemical compounds of Ligusticum striatum Makino are used as traditional medicinal herbs in Asia. These compounds are reported to have pain relief and antioxidant activities in gynecological and brain diseases. In this study, we investigated the antioxidant effects of Ligusticum fermented ethanol extract from Lactobacillus plantarum BHN-LAB 129 isolated from Kimchi, a Korean traditional food. The total polyphenol and total flavonoid contents increased by about 116.2% and 281.0% respectively, in the fermented Ligusticum extract as compared with those in the nonfermented Ligusticum ethanol extract. Superoxide dismutase-like (SOD), DPPH radical scavenging, ABTS radical scavenging, and reducing power activities increased by around 139.9%, 199.6%, 301.0%, and 137.1%, respectively, in the fermented Ligusticum ethanol extract as compared with these parameters in the nonfermented Ligusticum ethanol extract, respectively. In conclusion, the fermented Ligusticum ethanol extract with L. plantarum BHN-LAB 129 was effective in increasing the antioxidant effects. The bioconversion process in this study points to the potential of using Ligusticum to produce phytochemical-enriched natural antioxidant agents with high added value. The findings may prove useful in the development of improved foods and cosmetic materials.

• Journal of Magnetics
• /
• v.11 no.1
• /
• pp.5-7
• /
• 2006

The magnetotransport properties at room temperature of the 250-nm-thick MnAs(-1100) film grown on GaAs(001) substrate by molecular beam epitaxy was investigated. The results measured with various magnetic field directions were reported. They show the negative magnetoresistive effect for all field directions. The difference in the magnetoresistance curves for different field directions is in agreement with the magnetic anisotropy of the film.

• Journal of Magnetics
• /
• v.11 no.1
• /
• pp.1-4
• /
• 2006

We report on the growth, structural and transport properties of zinc-blende CrAs/GaAs/MnAs/GaAs multilayers on GaAs(001) substrates. Structural analyses using in-situ reflection high-energy electron diffraction and exsitu cross-sectional transmission electron microscopy confirmed the realization of a zinc-blende crystal structure. Room temperature Hall measurements reveal that the as-grown multilayer exhibits p-type conductivity with a very low resistivity of $0.052\;\omega{cm}$, a high carrier concentration of $6.2X10^{19}\;cm^{-3}$ and a Hall mobility of $1.8\;cm^2/Vs$. We also observed a clear decrease of the resistivity in samples after low temperature annealing.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4E
• /
• pp.132-138
• /
• 2005

The purpose of this study is to measure the acoustic properties of Tofu and Acorn Curd (Dotori Muk), which are possibly used as tissue mimicking materials (TMMs). Due to its availability and low cost, Tofu was suggested as a TMM by several researchers who measured only sound speed and attenuation. The acoustic properties of Tofu and Muk including the backscattering coefficient were measured in this paper. Sound speed was measured by the time shift in a pulse echo setup. Attenuation coefficients and backscattering coefficients were measured by a broadband method using both 5 MHz and 10 MHz transducers in the frequency domain. The measured acoustic properties of both Tofu and Muk are observed to be similar to those of biological tissues such as beef liver or beef heart.

• Corrosion Science and Technology
• /
• v.4 no.6
• /
• pp.231-235
• /
• 2005

The inhibitive effect of extracts of tamarind seeds and jackfruit seeds, curry leaves and henna leaves on corrosion of mild steel in 1M HCl solution have been studied by weight loss, potentiodynamic polarization and impedance measurements. Results obtained from the electrochemical techniques were in good agreement with weight loss results. From the weight loss data, the values of surface coverage ($\Theta$) and corrosion rate were calculated. The inhibition efficiency (IE) increased with increasing inhibitor concentration in 1M HCl solution. In all the cases the adsorption of the natural product extracts on the mild steel surface from 1M HCl follows the Langmuir adsorption isotherm relationship. Potentiodynamic polarization studies reveal the fact that all the four natural product extracts act as mixed type inhibitors. The decrease in the inhibition efficiency follows the order: Extracts of jackfruit seed>henna leaves>curry leaves>tamarind seed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.233-234
• /
• 2002

Diamond composites hold promise as a tribological material because of low friction and high wear resistance. We studied friction and wear of polyimide-20vol% PTFE-diamond composites in open air at room temperature, focusing on the effects of diamond size, and diamond content, sliding conditions, and mating material. Friction coefficient and wear tend to Increase with increasing diamond size and content. Composites of appropriate diamond size and content showed a friction coefficient below 0.1 and specific wear of $10^{-7}\;mm^3/Nm$. Friction and wear of composites sliding against stainless steel were higher than those of Al_2O_3$ an increase that became increasingly not able with increasing diamond size.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.159-167
• /
• 2009

In this paper, we consider a single-vendor single-buyer supply chain problem where a single vendor orders raw materials from its supplier, then using its manufacturing processes converts the raw materials to finished goods in order to deliver finished goods to a single buyer for effective implementation of Just-In-Time Purchasing. An integrated lot-splitting model of facilitating multiple shipments in small lots between buyer and supplier is developed in a JIT Purchasing environment. Also, an iterative heuristic solution procedure is developed to find the order quantity for finished goods and raw materials, and number of shipments between buyer and supplier. We show by numerical example that when the integrated policy is adopted by both vendor and buyer in a cooperative manner, both parties can benefit.

• Journal of Magnetics
• /
• v.5 no.2
• /
• pp.59-64
• /
• 2000

A drum type of high gradient magnetic separator was designed and optimized by computer simulations. The magnetic separator consists of high performance rare earth $(Nd_2Fe_14B)$ permanent magnets and magnetic yokes of extremely low carbon steel interconnecting the permanent magnets. Magnetic circuits of the separator were simulated for the aim of the least cost, highest magnetic strength and most efficient function by using specialized S/W (Vector Field Program) employing the Finite Element Method. The magnetic flux density was provided to be strong enough to collect the invisible fine metal particles from the surface of hot rolled steel plate with the efficiency of almost 95%.