• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1286-1293
• /
• 2008

This paper proposes a realization of robust trajectory tracking for an industrial robot by using PD-sliding mode hybrid control. The PD control has a good performance in the transient period while the sliding mode control has robustness against the system uncertainties. The proposed control method is proposed for the control of a multi-joint robot by taking advantages of both the PD and sliding mode controls. The embodiment of distributed controllers that drive 4-DOF axes has evaluated through experiments with the multi-joint robot AT1. The PD-sliding mode algorithm which is proposed in this paper shows a good performance in the transient period and robustness against disturbances and This paper shows accuracy of end-effector.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.120-129
• /
• 2001

As many sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation of a remote feedback control system via Profibus-DP net work for real-time distributed control More specifically, the effect of the network delay on the control performance evaluated on Profibus-DP testbed. Also, the traditional PID gain tuning methods are used to demonstrate the feasibility of the remote feedback control.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.1-9
• /
• 2016

열차제어시스템은 지상 전기 중심에서 차상 통신 중심으로 변화하고 있다. 최신의 열차제어시스템인 CBTC 시스템은 차상과 지상시스템 간 양방향 무선통신을 기반으로 높은 간격제어 효율을 가진다. 하지만 지상이 제어의 중심이 되고 있기 때문에 하나의 지상시스템이 허용할 수 있는 열차 투입 대수가 제한되고 차상과 지상제어시스템 간 cyclic-path 제어흐름으로 인해 운전시격 단축에 한계를 가진다. 본 논문은 열차자율주행제어시스템을 위한 간격제어와 차상중심 분산형 연동 알고리즘을 제안한다. 열차자율주행제어시스템은 차상에서 간격제어와 함께 분기제어를 수행하므로 선로와 분기기는 공유자원인 동시에 세마포어 요소이다. 제안된 열차자율주행기반 간격제어는 지상 제어시스템의 제어명령에 의존하지 않고 열차와 열차 또는 선로변 설비와의 직접적인 무선통신을 통해 열차 간격제어를 수행한다. 제안된 연동 알고리즘은 공유자원인 선로전환기가 동시에 두 대 이상의 열차가 점유하지 못하도록 선로전환기 고유 key를 이용한 세마포어 기법을 새롭게 정의한다. 시뮬레이션을 통해 제안된 열차자율주행제어시스템의 향상된 간격제어 성능을 확인하며, 차상중심 분산형 연동알고리즘과 기존의 연동장치에서 수행하던 여러 연동논리를 비교함으로써 단순화된 연동알고리즘으로 안전한 열차제어가 가능함을 확인한다.

• Management Science and Financial Engineering
• /
• 제2권1호
• /
• pp.19-51
• /
• 1996

We suggest a distributed framework for task assignment in the computer-controlled shop floor where each of the resource agents and part agents acts like an independent profit maker. The job allocation problem is formulated as a linear programming problem. The LP formulation is analyzed to provide a rationale for the distributed task assignment procedure. We suggest an auction based negotiation procedure including a price-based bid construction and a price revising mechanism. The performance of the suggested procedure is compared with those of an LP formulation and conventional dispatching procedures by simulation experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.158-163
• /
• 1986

This article surveys techniques and issues related to real time process control system developed for industrial control applications. It covers the system architecture and software engineering issues such as the design of data structures, scheduling of asynchronous task activities, management of shared resources, handling of interrupt and implementing an user friendly man-machine interface. Also problems associated with implementing a real-time system that supports dynamic configuration of data base is addressed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.947-951
• /
• 1989

A Class of nonlinear distributed parameter control problems is first stated in a partial differential equation form in multi-index notion and then converted into an integral equation form. Necessary conditions for optimality in the form of maximum principle are then derived in Sobolev space W$^{l}$, p/(1 leq. p .leq. .inf.)..

• 산업경영시스템학회지
• /
• 제25권6호
• /
• pp.1-6
• /
• 2002

Most of process data control have been designed under the assumption that there are independence between observed data. However, it has been difficult to apply the traditional method to realtime data because they are autocorrelated, and they are not normally distributed. And the more, they have fluctuating means. Already the control method for these data was proposed by Markov Modulated Gaussian Process. Therefore, this study take into account MMGP's traits especially for the MMGP's autocorrelation.

• 산업경영시스템학회지
• /
• 제33권1호
• /
• pp.33-40
• /
• 2010

Because sampling interval for data collection tends to be short compared with the overall processing time, in chemical process, instrumental process related tanks or furnace collected data have a significant autocorrelation. Insufficient control technique and frequent control actions cause unstable condition of the process. Traditional control charts which were developed based on iid (independently and identically distributed) among data cannot be applied on the existence of autocorrelation. Also unstable process is difficult to identity or diagnose. Because large-scale process has a lot of measurable variables and multi-step-structures among data, it is difficult to find relation between measurable variables and nonconformity. In this paper, we suggested an appicable model to diagnose the process and to find relation between measurable variables (CTQ) and nonconformity in the process having autocorrelation, unstable condition frequently, a lot of measurable variables, and multi-step-structure. And we applied this model to real process, to verify that the process engineers could easily and effectively diagnose the process and control the nonconformity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.844-847
• /
• 1989

This work describes an on-line method and procedure for calculating the fluid properties in real time while system is in operation. The method utilizes function blocks of distributed control systems. Thermodynamic relations of fluid from tables along with a fluid property formula are imbedded into the proposed signal processing block. Once the pressure and temperature measurements are entered the system provides other properties.

• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.903-910
• /
• 2000

In this paper, we describe a slave chip based on the Profibus-DP protocol and a system board to verify the developed slave chip. The Profibus-DP protocol is designed using VHDL and implemented on FPGA. The system board adopting the developed FPGA is designed FPGA is designed in which the firmware is implemented on Intel 8051 by using C language. Among the Profibus-DP protocols, low level layers from the physical layer to the data link layer is implemented in the form of hardware that we are able to greatly reduce the CPU load in processing protocols, and then higher layers could be processed by software. These technologies result in an IP to make terminal devices in the distributed control systems. Therefore, many digital logics as well as communication logics can be implemented onto SOC(System On a Chip) and it could be applied to various fieldbus-related areas.