• Title/Summary/Keyword: industrial aspect

Search Result 791, Processing Time 0.024 seconds

Vibration Analysis of Composite Laminated Plates with Increasing Aspect Ratio by Invariant and Correction Factor (형상비 변화에 따른 불변량과 수정계수를 사용한 적층복합판의 진동해석)

  • Park, Je-Sun;Lee, Jung-Ho;Hong, Chang-Woo;Lee, Joo-Hyung
    • Journal of Industrial Technology
    • /
    • v.19
    • /
    • pp.227-233
    • /
    • 1999
  • Simple equations which can predict "exact" values of the natural frequency of vibration for the special orthotropic laminates are presented. Many laminates with certain orientations have decreasing values of $B_{16}$ and $B_{26}$ as the number of plies increases. Such laminates, with $D_{16}=D_{26}{\rightarrow}0$, including the laminates with anti-symmetric configurations can be solved by the same equation for the special orthotropic laminates. If the quasi-isotropic constants are used, the equations for the isotropic plates can be used. Use of some coefficients cab produce "exact" value for laminates with such configurations. Natural frequencies of the plate with varying aspect ratios is presented.

  • PDF

Flexural Toughness and Fatigue Behavior of Steel Fiber Reinforced Rapid-set Cement Concrete (강섬유보강 초속경시멘트 콘크리트의 휨인성 및 피로거동)

  • Lee, Bong-Hak;Hong, Chang-Woo;Kim, Dong-Ho
    • Journal of Industrial Technology
    • /
    • v.19
    • /
    • pp.163-172
    • /
    • 1999
  • This study is conducted on the flexural toughness and flexural fatigue test to fine the mechanical properties of steel fiber reinforced rapid-set cement concrete. Experimental investigation is examined according to fiber contents(0, 0.4, 0.7, 1.0, 1.5%), fiber aspect ratio(58, 60, 83), fiber type (hooked, crimped fiber), and cement type (normal portland & rapid-set cement). The principal results obtained through this study are as follows; toughness and fatigue resistance tend to considerably increase with fiber contents, fiber aspect ration. And hooked fiber is improved better than crimped fiber. Concrete using rapid set cement is increased strength properties compared with concrete using normal portland cement, but relative strength properties behavior and fatigue resistance show a tendency to decrease a little.

  • PDF

Development of VSI Synthetic Control Chart (가변샘플링기법을 이용한 합성관리도의 개발)

  • Song, Suh-Ill;Park, Hyun-Kyu
    • Journal of Korean Society for Quality Management
    • /
    • v.33 no.1
    • /
    • pp.1-10
    • /
    • 2005
  • This paper develops a new VSI $\={X}-CRL$ synthetic control chart that considers convenience of use in the field, and perception of change of process applying VSI techniques to synthetic control chart, simultaneously. We found the optimal sampling interval and various control limit factor of the suggested chart using markov chain. Comparison and analysis is carried out between synthetic VSI $\={X}-CRL$ chart and other chart in the statistical aspect; $\={X}$ control chart, VSI $\={X}$ chart, another synthetic chart. In case that the process follows normal distribution, the proposed VSI $\={X}-CRL$ synthetic control chart in detecting process mean shift showed the best performance in aspect of statistical performance, regardless of control limit L of CRL/S control chart.

The Effect on Neglecting the Longitudinal Moment Terms in a Composite Liminate Plate with Stacking Sequence and Fiber Orientation (적층형태 및 보강방향에 따른 복합적층판의 종방향 모멘트 무시효과)

  • Lee, Bong-hak;Lee, Jung-ho;Hong, Chang-Woo;Kim, Kyung-Jin
    • Journal of Industrial Technology
    • /
    • v.18
    • /
    • pp.97-105
    • /
    • 1998
  • The most of the design engineers for construction has academic background of bachelors degree. Theories for advanced composite structures are too difficult for such engineers and some simple but accurate enough methods are necessary. The senior author has reported that some laminate orientations have decreasing values of $D_{16}$, $B_{16}$, $D_{26}$ and $B_{26}$ stiffnesses as the ply number increases. Such plates behave as special orthotropic plates and simple formulas developed by the author can be used. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms($M_x$) on the relevant partial differential equations of equilibrium. In this paper, the result of the study on the subject problem is presented.

  • PDF

A Study on Performance Cause Analysis for the Fund of Stack Type (주식형 펀드의 성과요인 분석에 관한 연구)

  • 여동길;김상오
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.14 no.24
    • /
    • pp.207-219
    • /
    • 1991
  • We studied performance evaluation methods for each cause by using a benchmark and also researched performance measurement models which based on CAPM. In this study, we analyzed the beneficiary certificate of stock type of three large domestic investment trust company. The purpose of this paper is improving the efficiency of investment maintenance and the operating the ability of fund operator by analyzing the contribution of the rate of return on investment and the cause of operating performance. We applied this study to the increasing aspect of stock price(Jan. 1988-April. 1999) as well as the decreasing aspect of stock price(April, 1989-July. 1990).

  • PDF

Warm Compaction: FEM Analysis of Stress and Deformation States of Compacting Dies with Rectangular Profile of Various Aspect Ratio

  • Armentani, E.;Bocchini, G. F.;Gricri, G.;Esposito, R.
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2006.09a
    • /
    • pp.191-192
    • /
    • 2006
  • The deformation under radial pressure of rectangular dies for metal powder compaction has been investigated by FEM. The explored variables have been: aspect ratio of die profile, ratio between diagonal of the profile and die height, insert and ring thickness, radius at die corners, interference, different insert materials, i. e. conventional HSS, HSS from powders, cemented carbide (10% Co). The analyses have ascertained the unwanted appearance of tensile normal stress on brittle materials, also "at rest", and even some dramatic changes of stress patterns as the die height increases with respect to the rectangular profile dimensions. Different materials behave differently, mainly due to difference of thermal expansion coefficients. Profile changes occur when the dies are heated up to the temperature required for warm compaction. The deformation patterns depend on compaction temperature and thermal expansion coefficients.

  • PDF

A Study on the Measurement of Industry Agglomeration for the Census on Basic Characteristics of Establishments (사업체 기초통계조사에서 산업활동의 공간집적도 측정 연구)

  • 김윤수;정연수;김병천
    • The Korean Journal of Applied Statistics
    • /
    • v.17 no.1
    • /
    • pp.13-26
    • /
    • 2004
  • According to economic growth theory, location configuration of business enterprises engaged in specific industries has spatial affinity. In this research we defined industrial concentration index to measure industry agglomeration using the characteristics of dispersion parameter of negative binomial distribution, and used the industrial concentration index to examine aspect of spatial configuration change. We utilized Census on Basic Characteristics of Establishments of 1995 and 2000 to deduce industrral concentration indices of 7 knowledge-based industries and 9 strategy-based industries of Choongbuk Province and analyzed the aspect of spatial configuration change.

The Change of Industrial Structure and Public Interest as to the Convergence of Broadcasting and Telecommunications (방송통신 융합에 따른 산업구조의 변화와 공익성)

  • Joo, Chung-Min
    • Korean journal of communication and information
    • /
    • v.36
    • /
    • pp.109-132
    • /
    • 2006
  • It is difficult to found the concept of public interest properly, being ambiguous to distinguish media and service as to the convergence of broadcasting and telecommunications. Accordingly, it is necessary to found the concept of public interest not related to the character of media and service in the age of digital convergence. Therefore this study intended to re-found the concept of public interest, as to industrial changes in the age of convergence of broadcasting and telecommunications. The convergence of broadcasting and telecommunications causes the changes of value chain, which includes contents, platform, network, terminal. It could not help avoiding modifying the industrial structure of broadcasting and telecommunications, because of the changes of value chain. The changes of industrial structure needs the changes of ideology, regulatory policy, regulatory system, and it creates the foundation of new regulatory idea. The purpose of regulatory idea in the age of digital convergence is to practice public interest, and it is an ultimate purpose to increase consumers' welfare. Consequently, for increasing comsumer' welfare, it is necessary to achieve diversity, fairness, objectivity, the preservation of social value in the aspect of contents. Also in the aspect of platform, it is necessary to achieve the protection of privacy, consumer protection, harmful information blocking, and in the aspect of network, it is necessary to achieve the maintenance of secure network, fair competition. Finally, in the aspect of terminal, it is necessary to achieve the maintenance of compatibility, the solution for digital divide. Then regulatory policy of each value chain from a legal and institutional perspective, should be promoted to provide public interest, step by step.

  • PDF

Aspect-Based Sentiment Analysis Using BERT: Developing Aspect Category Sentiment Classification Models (BERT를 활용한 속성기반 감성분석: 속성카테고리 감성분류 모델 개발)

  • Park, Hyun-jung;Shin, Kyung-shik
    • Journal of Intelligence and Information Systems
    • /
    • v.26 no.4
    • /
    • pp.1-25
    • /
    • 2020
  • Sentiment Analysis (SA) is a Natural Language Processing (NLP) task that analyzes the sentiments consumers or the public feel about an arbitrary object from written texts. Furthermore, Aspect-Based Sentiment Analysis (ABSA) is a fine-grained analysis of the sentiments towards each aspect of an object. Since having a more practical value in terms of business, ABSA is drawing attention from both academic and industrial organizations. When there is a review that says "The restaurant is expensive but the food is really fantastic", for example, the general SA evaluates the overall sentiment towards the 'restaurant' as 'positive', while ABSA identifies the restaurant's aspect 'price' as 'negative' and 'food' aspect as 'positive'. Thus, ABSA enables a more specific and effective marketing strategy. In order to perform ABSA, it is necessary to identify what are the aspect terms or aspect categories included in the text, and judge the sentiments towards them. Accordingly, there exist four main areas in ABSA; aspect term extraction, aspect category detection, Aspect Term Sentiment Classification (ATSC), and Aspect Category Sentiment Classification (ACSC). It is usually conducted by extracting aspect terms and then performing ATSC to analyze sentiments for the given aspect terms, or by extracting aspect categories and then performing ACSC to analyze sentiments for the given aspect category. Here, an aspect category is expressed in one or more aspect terms, or indirectly inferred by other words. In the preceding example sentence, 'price' and 'food' are both aspect categories, and the aspect category 'food' is expressed by the aspect term 'food' included in the review. If the review sentence includes 'pasta', 'steak', or 'grilled chicken special', these can all be aspect terms for the aspect category 'food'. As such, an aspect category referred to by one or more specific aspect terms is called an explicit aspect. On the other hand, the aspect category like 'price', which does not have any specific aspect terms but can be indirectly guessed with an emotional word 'expensive,' is called an implicit aspect. So far, the 'aspect category' has been used to avoid confusion about 'aspect term'. From now on, we will consider 'aspect category' and 'aspect' as the same concept and use the word 'aspect' more for convenience. And one thing to note is that ATSC analyzes the sentiment towards given aspect terms, so it deals only with explicit aspects, and ACSC treats not only explicit aspects but also implicit aspects. This study seeks to find answers to the following issues ignored in the previous studies when applying the BERT pre-trained language model to ACSC and derives superior ACSC models. First, is it more effective to reflect the output vector of tokens for aspect categories than to use only the final output vector of [CLS] token as a classification vector? Second, is there any performance difference between QA (Question Answering) and NLI (Natural Language Inference) types in the sentence-pair configuration of input data? Third, is there any performance difference according to the order of sentence including aspect category in the QA or NLI type sentence-pair configuration of input data? To achieve these research objectives, we implemented 12 ACSC models and conducted experiments on 4 English benchmark datasets. As a result, ACSC models that provide performance beyond the existing studies without expanding the training dataset were derived. In addition, it was found that it is more effective to reflect the output vector of the aspect category token than to use only the output vector for the [CLS] token as a classification vector. It was also found that QA type input generally provides better performance than NLI, and the order of the sentence with the aspect category in QA type is irrelevant with performance. There may be some differences depending on the characteristics of the dataset, but when using NLI type sentence-pair input, placing the sentence containing the aspect category second seems to provide better performance. The new methodology for designing the ACSC model used in this study could be similarly applied to other studies such as ATSC.

A Study on Makerspace: Focusing on Its Urbanism and Placeness (산업공간으로서 메이커스페이스의 도시성(urbanism)과 장소성(placeness))

  • Jeong Seok Ha
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.25 no.4
    • /
    • pp.547-567
    • /
    • 2022
  • In this study, I focus on makerspaces, which have rapidly spread since the late 2000s in the world's major cities. Makerspaces, born amid great social change, reflect the core characteristics of industrial space. I analyze the makerspace based on the theoretical perspectives of urbanism in the macroscopic aspect and placeness in the microscopic aspect. The urbanism of makerspaces is manifested through entry into the inner cities and their connections with urban capabilities. This means that convergence with innovation factors is becoming more important than optimization of factor costs and agglomeration economies in the locational determinants of industrial space. The placeness of makerspaces is being re-formed through an emphasis on taste, the expansion of autonomy, and the strengthening of connections. This reveals how the value creation process within the industrial space is changing, from forming-placelessness through standardization, uniformity, and compartmentalization to forming-placeness through restoration of individual humanity and interaction. The results of the urbanism and placenesss analysis carry implications for the present moment, when it is necessary to diversify the spatial planning of industrial spaces.