• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.4
• /
• pp.363-369
• /
• 2009

The total number of confined space accident cases from 1999 to 2007 in Korea were 220, causing 353 injuries and 212 casualties. Out of 220 cases, 44(20.0%) occurred in sewage treatment facilities and 40(18.2%) occurred in both manholes and containers. When the main causes of confined space accidents were classified, oxygen deficiency accounted for 69 cases(31.4%), carbon monoxide, 48(21.8%), hydrogen sulfide, 40(18.2%), and organic solvent, 32(14.5%). Improvement of occupational accident statistics is necessary in order to report accurate and precise data for confined space accidents. The structure of confined space must be considered when selecting gas to be measured.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.156-163
• /
• 2015

The number of the lifts installed and used in Korea totals up to 526,676 units as of the end of December 2014, due to the development and urbanization of this country. Since the lift is one of the convenience facilities and especially a kind of essential transportation facilities used by a majority of passengers everyday, it is necessarily required to manage the lift safety. Therefore, this study aims to determine the 5 factors(kinds of lifts, ages of victims, causes of accidents, seasons in accidents, usages of buildings) affecting the types(caught in, trip over, falling, collision) and the injury levels(death, serious injury, minor injury) of the lift accidents based on the analysis of the total victims of 1,514 people due to the 1,146 accidents which have occurred for the past 15 years, and to find the frequency and ratio of each factor in the accidents, and to make a correlation among the factors. As the result of the analysis, it shows that there exists a statistically significant correlation among the factors.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.75-82
• /
• 2016

According to the statistics, occupational fatal injuries by the fork lifts were about 30 per year in whole industrial. Fork lifts are widely used in various parts of industries to improve the efficiency of the work. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by the fork lifts. Fatal injury analysis were conducted with several accident cases by the fork lifts. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the fork lift showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. First, fork lifts were the highest of the machines caused the accidents. In order to prevent fatal injuries by the fork lifts, the tarket was manufacturing industry. Second, the order of the cause of cognitive engineering agenda in the manufacture industrial was visibility, responsibility and affordance, and revision of acts was proposed. Third, there was not a lots of different points of human error between occurrence types and business sizes. Forth, number of fatalities by the attacker was more than by the inducer.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.69
• /
• pp.87-92
• /
• 2001

A significant number of all reported accidents in Korea involved education and training Based on the Labor Ministry data, statistics, show the education cause was directly involved in 38% of major accidents, Since safety managers have in charge of safety education at the factory, occupational safety curriculum must be studied to train safety manager effectively. In this study an analysis on relative importance of industrial safety curriculum for a good safety manager was performed by Analytic Hierarchy Process(AHP) The results showed that relative importance of industrial safety curriculum by AHP was safety management(w=0.240) ergonomics and system safety(w=0.201) construction safety(w=0.182) mechanic safety(w=0.139) electronic safety(w=0.134) and chemical safety(w=0.104) in order. The results could be used for industrial safety curriculum planning in university and safety organization such as Korea Occupational safety and Health Agency.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.141-149
• /
• 1999

At present time, industrial accidents statistics are used as the basic data of the policy to prevent industrial accidents and the plan to applicate the industrial accident insurance. But this statistical data is not sufficient for the effective safety management because it is the expression of the itemized distribution and the frequency for the whole cases. This study tried to correlational analysis for each causes by defining investigational items as their accident parameters. The correlational analysis, between the unsafe action and status and their relational causes, was performed to analyze the occurrence causes of industrial accident. And to assume the severity of accident, the correlativity and independency between causes and direct causes which are defined hospital days subordinate parameter were analyzed. In addition, this study expressed numerically the effectiveness of subordinate parameters depended on the level of independent parameter by presenting the predictive model between dependent parameter and independent parameter, which have the categorical parameter, through the Logit analysis method.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.95-104
• /
• 2017

Among the industrial disasters caused by drop, ladder related drop disasters are occurred the mostly. The victims are occurred continuously. This study analyzed current situation of industrial disasters for recent 10 years(2005~2014) and compared analyzed statistics of death disasters of ladder by workplace scale, age, occupation, employment type, working content, scarred area, etc. in detail. This study suggested direction of safety standard modification for ladder that is an original cause material of many drops, direction of safety training strengthening of small-scaled workplace, and safety model based on disaster statistics and should contribute to reduction of disaster rate for ladder working.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.135-141
• /
• 2015

According to the statistics, occupational fatal injuries by mobile cranes were about 12 per year in whole industrial. Mobile cranes are widely used in various parts of industries to improve the efficiency of the work. However considerable number of fatal injuries happen each year during the operation of the machines. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by mobile cranes. Fatal injury analyses were conducted with several accident cases by the mobile cranes. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the mobile crane showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. This study proposed a revision of the standard guideline as an accident prevention measures through in-depth analysis of fatal accidents. First, among the mainly five machines caused the accidents, mobile crane was higher for the second showed 0.6% for number of fatalities compared to number of mobil cranes and for the third showed 11% for number of fatalities compared to number of injuries. Second, main cause of cognitive engineering agenda was visibility, responsibility, affordance. As the measures to prevent accidents before starting operation, alternative revision for the fool proof including visibility, responsibility, affordance etc. for the fool proof measures was proposed. Third, alternative revision as cognitive accident prevention for the fail safe measures was proposed.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.59-65
• /
• 2020

For monitoring the status of industrial accidents, many statistical indexes have been developed and applied such as fatal rate, frequency rate, and severity rate. These accident indexes are measured by frequency and loss time according to the accidents in the individual industry level. However, it is less considered to use the index of identifying the industrial concentration of accidents in the holistic view. Thus, this study aims to suggest the accident concentration level among domestic industries through index analysis. The concentration level of industrial accidents is calculated by the accident composition of sub-industries. This concentration level shows whether an industry is comprised of a few sub-industries generating more accidents or an industry consists of sub-industries having the similar number of accidents. To this end, the concentration rate (CR) and concentration index (CI) are proposed to take a look at the industry composition of accidents by embracing the concept of market concentration indexes such as Hirschman-Herfindahl Index. As for the case study, four industries of mining, manufacturing, transportation, and other business (usually service) are analyzed in terms of indexes of accident rate, death(fatality) rate, and CR and CI of accident and death. Finally, we illustrate the positioning map that the accident concentration level is compared with the traditional accident frequency level among industries.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.3
• /
• pp.117-126
• /
• 1998

Safety aspect in the manufacturing facility or at the construction site is increasingly emphasized in Korea for last a decade. As a result, the number of industrial accident is decreased slowly by improving the reliability of equipments and human performance through organizational efforts. This paper proposes a mathematical model to estimate and predict the human reliability level corresponding to the worker's job experience. For this purpose, we used the statistics of industrial accidents issued by the Department of Labor in the years of 94-96. The methodology developed in this research will provide a basis for better cost estimation in planning labor policy in the early stage of a project. We believe that this effort would eventually lead to a basis for a new approach to the safety planning.

• Korean Journal of Occupational Health Nursing
• /
• v.25 no.1
• /
• pp.65-74
• /
• 2016

Purpose: The purpose of this study is to predict industrial accident rate using time series analysis. Methods: The rates of industrial accident and occupational injury death were analyzed using industrial accident statistics analysis system of the Korea Occupational Safety and Health Agency from 2001 to 2014. Time series analysis was done using the most recent data, such as raw materials of Economically Active Population Survey, Economic Statistics System of the Bank of Korea, and e-National indicators. The best-fit model with time series analysis to predict occupational injury was developed by identifying predictors when the value of Akaike Information Criteria was the lowest point. Variables into the model were selected through a series of expertises' consultations and literature review, which consisted of socioeconomic structure, labor force structure, working conditions, and occupational accidents. Results: Indexes at the meso- and macro-levels predicting well occurrence of occupational accidents and occupational injury death were labor force participation rate for ages 45-49 and budget for small scaled workplace support. The rates of industrial accident and occupational injury death are expected to decline. Conclusion: For reducing industrial accident continuously, we call for safe employment policy of economically active middle aged adults and support for improving safety work environment of small sized workplace.