• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.868-874
• /
• 2011

본 논문은 분해능이 향상된 인덕티브 방식 토크 센서의 새로운 구조를 제안한다. 토크 센서의 결합 구조와 수신 코일의 감김 수를 변화시켜 분해능을 증가시켰다. 이 토크 센서는 비접촉식으로 마모가 없기 때문에 내구성이 높으며, 진동이나 기구의 비틀림 등에 의한 편차가 적고, EMC(Electromagnetic Compatibility) 및 온도 특성이 우수하다.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1526-1531
• /
• 2009

In this paper, for the first time a new type of narrow-range angle sensor based on inductive effect is introduced and studied. A prototype steering angle sensor is also designed and fabricated to compare the characteristics of the four methods from the viewpoints of sensitivity, linearity and resolution, angle range of the sensor output. This sensor is designed to be sensitive to very small resolution in angle with detected range is scaled down to about 12bit. An intensive investigation has been carried out to study the behaviors of the sensor and optimize its performance by signal compensation. These behaviors are discussed and explained using an analytical and experimental testings. Moreover, Application possibility of the sensor are proposed and a demo device based on the sensor is presented.

• 센서학회지
• /
• 제14권4호
• /
• pp.225-230
• /
• 2005

This paper describes a novel tip position sensor made of a triangularly shaped piezoelectric PVDF (polyvinylidene fluoride) film for a cantilever beam. Due to the boundary condition of the cantilever beam and the spatial sensitivity function of the sensor, the charge output of the sensor is proportional to the tip position of the beam. Experimental results with the PVDF sensor were compared with those using two commercially available position sensors: an inductive sensor and an accelerometer. The resonance frequencies of the test beam, measured using the PVDF sensor, matched well with those measured with the two commercial sensors and the PVDF sensor also showed good coherence over wide frequency range, whereas the inductive sensor became poor above a certain frequency.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권1호
• /
• pp.64-70
• /
• 2017

In the commercial building such as huge enterprise building, more accurate operation of the center-controlled roller blind. We design, in this work, the target disc that its shape is nonlinearly changing and the sensor coils that are differentially arranged. The performance shows less than 1% accuracy when it is implemented in the roller blind.

• 센서학회지
• /
• 제23권6호
• /
• pp.409-415
• /
• 2014

We had presented an inductive type intraocular pressure sensor (L-sensor) in previous work. The distance between a micro coil and a ferrite on the membrane was modulated by pressure, and as a result the inductance and resonant frequency were changed. However, L-sensor has some problems to implant in eyes. First problem is low sensitivity. When L-sensor was implanted in rabbit's eyes, resonant frequency of L-sensor was very hard to detect. Second problem is biocompatibility. Size of L-sensor is $6{\times}7{\times}1.2mm$. When L-sensor was implanted in the eyes, it caused the inflammation. Therefore, this study suggests an inductive and capacitive type IOP sensor (LCsensor). The sensitivity of the LC-sensor 27.3 kHz/mmHg under 60mmHg. It is much larger than 14 kHz/mmHg of the L-sensor. And the size of LC-sensor is 47% smaller than L-sensor. After 2 weeks from the implantation of LC-sensor into rabbit eyes, we measured the changes of resonant frequency of LC-sensor according to increased IOP by Balanced Salt Solution (BSS) injection. As a result, the sensitivity of LC-sensor in in vivo test is 25 kHz/mmHg. That is similar to the sensitivity of in vitro test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.29-33
• /
• 2007

본 연구에서는 RLS(Rescursive Least Square) 알고리즘을 이용하여 정전용량형 습도센서를 사용한 원격 RF 센서 시스템의 시변 파라메타를 추정하고자 한다. IC 칩 형태의 원격 RF 센서 시스템이 가지는 구성의 복잡성 그리고 전력소모 문제를 해결하기 위해 보다 간단한 유도결합모델이 제안된다. 모델기반의 RLS 알고리즘을 수학적인 모델로 유도된 시스템에 적용시키기 위해 페이저법을 이용하여 모델의 파라메타를 재배열한다. 오차 제곱합의 수렴특성을 가진 RLS 알고리즘을 이용하여 시변 파라메타를 추정하며, 잡음을 내포한 측정 데이터에 대한 추정 성능을 확인함으로써 그 유효성을 검증하고자 한다.

• 한국정밀공학회지
• /
• 제31권3호
• /
• pp.223-232
• /
• 2014

An inductive sensor system is proposed to detect the gear location and angular position of a geared shaft for automatic feeding of the shaft into the proper cutting position of the other end. The system consists of two set of coils, bridge circuit, signal condition circuit, and microprocessor. The coil sensors of the system measure changes of inductance along with the surface position of a geared shaft. The inductance changes are transformed to voltages by the bridge circuit, which are then conditioned and processed for the recognition of the gear. In order to incorporate with the experimental results with the sensor system, a finite element method (FEM) simulation for the magnetic field between the sensor and the shaft was carried out. The predicted results and the experiments revealed that the sensor system was appropriate for sensing the position of gear and the angular position of gear tooth of a geared shaft.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.48-55
• /
• 2010

We have development the steering angle sensor using not only detecting parts but also integrating technique with semiconductors for automobile applications. The performance design and analysis of the steering angle sensor for intelligent vehicles is complicated due to variety of parameters. In this study, the performance characteristics of the angle sensor were analyzed using test rig. By means of magnetic induction technique, these new the steering angle sensors showed excellent magnetic characteristics. The detection range of steering angle sensor obtained was ${\pm}800^{\circ}$, the maximum non-linearity is 0.744% Full Span and the temperature range was $-40^{\circ}C{\sim}+125^{\circ}C$. With this conclusive, the inductive angle sensor was quite satisfactory for many applications in intelligent vehicles.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.495-498
• /
• 2004

In this paper, passive telemetry capacitive humidity sensor system using a RLSE(Recursive Least Square Estimation) technique Is proposed. To overcome the problem like power limits and complications that general passive telemetry sensor system including IC chip has, the principle of inductive coupling is applied to model the sensor system. Specially, by applying the forgetting factor, we show that the accuracy of its estimation can be improved even in the case of time varying parameter and also the convergence time can be reduced.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.496-497
• /
• 2009

This paper describes about the realization of a remote RF sensor system and its applications. RF Sensor System was designed and realized on DSP over the range of high frequency such as about 200[KHz]. It should be "wireless", "implantable" and "batteryless". Futhermore, the system should be consist of passive components such as R, Land C. The measurement was given using the inductive coupling principle between primary source part and secondary sensor part. This newly developed parameter estimation system can be easily applied to the Ambient Intelligent System including the ubiquitous computing and the sensitive environmental changes.