• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1280-1285
• /
• 2005

Using the nodY::lacZ fusion system in Bradyrhizobium japonicum USDA 110, 22 flavonoids, which have structurally different features, were tested to define the role of the substituted functional groups as an inducer or inhibitor for the nod gene expression. A functional ,group of 4'-OH on the B-ring and the double bond between 2-C and 3-C on the C ring were required to induce the nod gene expression in B. japonicum USDA 110. In the case of isoflavones, the 4'-methoxyl group, which blocks the open 4'-OH functional group, did not significantly lower inducing activity, as compared with isoflavones with 4'-OH. However, all flavonols tested, which have a 3-OH functional group on the C-ring, did not induce, but inhibited the nod gene expression. Flavone, 7-hydroxyflavone, and kaempferol (5,7,4'-trihydroxyflavonol) at $1\;{\mu}M$ concentration significantly inhibited the nod gene expression induced by 7,4'-dihydroxyflavone. However, 7-hydroxy-4'-methoxyflavone at $1\;{\mu}M$ concentration showed a synergistic effect with genistein and 7,4'-dihydroxyflavone on the induction activity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.4
• /
• pp.570-578
• /
• 1997

At design stage of new motor or when taking remedial action of old motor, a lot of information can be obtained from thermal parameters analysis. This study focused on the temperature rise of TEFC induction motor with respect to various thermal parameters. Frame heat transfer had the most important effect on coil temperature rise. But those of air gap and rotor fan had no effect. This fact shows fan action is more important than fin action in the case of rotor fan. Coil temperature can be more decreased by cooling near the heat sources than any other parts from the results of thermal conductivity and loss tests. Variation of cooling air flow rate and motor volume effects on coil temperature were also tested. These tests suggest that improvement of cooling fan performance is important in reducing the coil temperature rise. Thermal equivalent program was verified by comparison of some experimental results.

• Journal of Embryo Transfer
• /
• v.18 no.2
• /
• pp.115-124
• /
• 2003

The objective of this study was to compare the effect of four different estrus induction methods in anestrus cows on the estrus induction and pregnancy following artificial insemination (AI). Sixty-five cows (3∼4 years old) were selected and divided into four different estrus induction treatment groups. Group 1, 12 cows were treated by Ovsynch program combined with GnRH and PGF$_2$a. Group 2, 12 cows were treated by "Tow plus Two" program with GnRH and PGF$_2$a. Group 3, 20 cows were treated by "Tow plus Two" program following intravaginal progesterone implantation (CIDR). Twenty one cows in Group 4 were treated by "Tow plus Two" program following follicular rupture and intravaginal progesterone implantation. Cows were then observed estrus induction and inseminated artificially at 12 h and 24 h after standing estrus. The rates of estrus induction in Group 4 (18/21, 86%) was significantly (P<0.05) higher than those in groups 1, 2 and 3 (8/12, 67%; 9/12, 75%; 14/20, 70%). In the mean time of onset of estrus after final administration of GnRH in different hormone-treated cows, the cows in Group 3 (24.2$\pm$2.2) and Group 4 (23.4$\pm$2.0) were significantly (P<0.05) shorter than that in Group 1 (28.5$\pm$4.6) and Group 2 (26.4$\pm$3.3). The rates of pregnancy diagnosed on Day 28 were significantly different between treatment groups. Significantly (P<0.05) higher rate of pregnancy was observed in Group 4 (17/20, 85.0%) than those in Groups 1, 2 and 3 (7/11, 63.6%; 8/12, 66.7%; 15/20, 75.0%, respectetively). The rate of abortion diagnosed on 49 days of gestation was significantly (P<0/05) lower in Group 4 (1/17, 5.9%) than those in Groups 1, 2 and 3 (2/7, 28.7%; 2/8, 25% and 3/15, 20%, respectively). In conclusion, combined treatments with GnRH and PGF$_2$a following follicular rupture and progesterone implant in anestrus cows was considered to be most effective in estrus induction and maintenance of pregnancy. Further studies are needed to verify the functional mechanisms of residual follicles in anestrus ovaries on retarding the response of hormonal treatments.sponse of hormonal treatments.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.187-189
• /
• 2006

Transient finite element method for analysis of moving coil needs many number of elements and much time to make calculation. Therefore, induction heating process for moving coil was simulated by traveling the position of the heating planes in this paper. In the magnetic and thermal analyses, temperature-dependent magnetic and thermal material properties were considered. Finite element program was developed and finite element results were compared with the experimental results.

• Journal of Embryo Transfer
• /
• v.26 no.4
• /
• pp.271-276
• /
• 2011

This study was focused on improvement of milk production in Mongolian dairy industry by artificial insemination (AI) technology, supported by ODA of KOICA in Republic of Korea. This program was started in January 2009 and it is in $3^{rd}$ years. This manuscript summarized the data especially on estrus synchronization and pregnancy establishment in dairy cows (Holstein) this year. A total of 81 dairy cows from 4 private farms (38 from Undarmal milk and that of 30, 8 and 5 dairy cows from Onjin (Enkhbayer), Jargalant, and BRM School farms respectively) were synchronized with 5 ml Lutalyse (i.m.) in the dump of dairy cows and then estrus was detected 2 to 3 days after $PGF_{2{\alpha}}$ injection. The synchronized dairy cows were inseminated with 0.5 ml dairy frozen semen by conventional artificial insemination (AI) techniques. Pregnancy was diagnosed about 60 days after AI by palpation method. About 96.3% (78/81) of synchronized cows were responded to single $PGF_{2{\alpha}}$ injection. Total 75 over 78 dairy cows (90.1%) inseminated were diagnosed as pregnant. The estrus induction and pregnancy rates were very effective using Lutalyse injection and conventional AI techniques in Mongolian dairy cow. The present results indicated that AI after estrus induction in Mongolian dairy cows could be applied to dairy breeding technology for improving breeding efficiency and milk production of the country.

• Archives of Pharmacal Research
• /
• v.26 no.8
• /
• pp.585-590
• /
• 2003

Activity-guided fractionation of the EtOAc-soluble extract of the whole plants of Sida acuta using a bioassay based on the induction of quinone reductase (OR) in cultured Hepa 1c1c7 mouse hepatoma cells, led to the isolation of ten active compounds of previously known structure, quindolinone (1), cryptolepinone (2), 11-methoxyquindoline (3), N-trans-feruloyltyramine (4), vomifoliol (5), loliolide (6), 4-ketopinoresinol (7), scopoletin (8), evofolin-A (9), and evofolin-B (10), along with five inactive compounds of known structure, ferulic acid, sinapic acid, syringic acid, ($\pm$)-syringaresinol, and vanillic acid. These isolates were identified by physical and spectral data measurement. A new derivative of quindolinone, 5,10-dimethylquindolin-11-one (1a) was synthesized and characterized spectroscopically. Of the active substances, compounds 1-3 and 1a exhibited the most potent QR activity, with observed CD (concentration required to double induction) values ranging from 0.01 to 0.12 $\mu$ g/mL. Six compounds were then evaluated in a mouse mammary organ culture assay, with cryptolepinone (2), N-trans-feruloyltyramine (4), and 5,10-dimethylquindolin-11-one (1a) found to exhibit 83.3, 75.0, and 66.7% inhibition of 7,12-dimethylbenz[a]anthracene-induced preneoplastic lesions, respectively, at a dose of 10 $\mu\textrm{g}$/mL.

• Transactions of Materials Processing
• /
• v.10 no.4
• /
• pp.329-337
• /
• 2001

The finite element simulation model and the program to calculate the reverse moment have been developed to analyse the stress state and deformation of pipe bending using local induction heating with small bending radius in this study. The reverse moment that is to be applied on the bending arm to control the wall thinning ratio of the bending outside to within a particular value. Even though the demand of pipes with small bending radius is increasing in power plants and ship buildings, the welded elbows are still widely used. The bending process with or without a reverse moment acting on the bending arm has been simulated. The reverse moments calculated from the developed program are in good agreement with the finite element simulations and the experiments.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.217-221
• /
• 2002

In this research a Matlab/Simulink/RTW - based on the realtime control system was developed for an induction motor vector control. On the Simulink window, the control system is designed In the form of block diagrams, program codes are produced automatically with the RTW(Real Time Workshop), then a DSP c compiler complies the program codes.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.208-211
• /
• 2003

The western route of KEPCO's 765 kV transmission line has been tentatively operating as 345 kV voltage before commercial operation. KEPCO decided to operate the 765 kV line for commercial operation after completing the test operation of 765 kV substation in 2002. In the process of energizing the line as 765 kV voltage, double circuit transmission line will be operated with two voltage grades of 765 kV and 345 kV. As the earthing switches are installed on both ends of the line, electrostatic induction voltage and electromagnetic induction current were calculated prior to the line energizing in order to confirm the ratings. The induced voltage and current are important for the maintenance of the parallel circuit. This paper presents the simulation results of electrical phenomena such as electrostatic induction voltage and electromagnetic induction current from the parallel line. The transmission line was modeled by EMTP (Electro-Magnetic Transient Program). The simulation results were compared with the measured results at the field.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.1-8
• /
• 2023

In this study, the stability of fishing boat inducing the change of fishing lamp in accordance with the installation of induction lamp in comparison with metal halide lamp was investigated. Inclining test for 8.55 ton class of hair-tail angling fishing boat was performed in order to find a GM and light weight. A stability calculation of the target fishing boat on the basis of KST-SHIP program was evaluated. The stability of the fishing boat with a metal halide lamp such as induction lamp according to the result obtained by the inclining test is slightly different, and the stability is not so much affected. Due to the induction lamp installation, the wind area increased by about 3.178 m². Before installing the induction fishing lamp, G₀M was found to be 0.209 at full load departure and 0.296 at departure from fishing ground. After installing the induction lamp, the full load departure condition is 0.178 and the fishing ground departure condition is 0.260. The G₀M value before and after installation of the induction fishing lamp shows a difference of about 3% at the full load departure condition. The value of the critical angle of inclination definition showed a difference of about 16%. Despite these differences, it is lower than the regulations; it was confirmed that there will be no significant difference unless it is in an overloaded state.