• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.92-98
• /
• 2014

Recently, Fingerprint approach using RSSI based on WLAN has been many studied in order to construct low-cost indoor localization systems. Because this technique is relatively evaluated non-precise positioning technique compared with the positioning of Ultra-Wide-Band(UWB), the performance of the Fingerprint based on WLAN should be continuously improved to implement various indoor location. Therefore, this paper presents a Fingerprint approach which can improve the performance of localization by using RSSI and LQI contained IEEE 802.15.4 standard. The advantages of these techniques are that the characteristics of each location is created more clearly by utilizing RSSI and LQI and Fingerprint technique is improved by using the modified Euclidean distance method. The experimental results which are applied in NLOS indoor environment with various obstacles show that the accuracy of localization is improved to 22% compared to conventional Fingerprint.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.38-47
• /
• 2008

The most commonly used location recognition system is the GPS-based approach. However, the GPS is inefficient for an indoor or urban area where high buildings shield the satellite signals. To overcome this problem, this paper propose the indoor positioning method using wavelet and neural network. The basic idea of proposed method is estimated the location using the received signal strength from wireless APs installed in the indoor environment. Because of the received signal strength of wireless radio signal is fluctuated by the environment factors, a feature that is strength of signal noise and error and express the time and frequency domain is need. Therefore, this paper is used the wavelet coefficient as the feature. And the neural network is used for estimate the location. The experiment results indicate 94.6% an location recognition rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1003-1006
• /
• 2009

Recently, Ubiquitous computing technology is increasing necessity for object recognition and a location tracking technology to meet various applications. The location tracking technology is the fundamental to the Context-Aware of users in Ubiquitous environment and its efficiency has to be improved using IEEE 802.15.4 ZigBee used in current infra such as ubiquitous sensor network. But because the IEEE 802.15.4 ZigBee protocol has limitation to apply location tracking technology such as ToA and TDoA, Zone-based Location Tracking technology using RSSI is needed. In this paper suggests RSSI-based 802.15.4 ZigBee local positioning protocol to support a positioning tracking service in Ubiqutous environment. And Zone-based location tracking system is designed for actual the indoor location tracking service.

• Journal of Korea Multimedia Society
• /
• v.15 no.9
• /
• pp.1112-1125
• /
• 2012

To realize LBS (Location Based Service), typically GPS is mostly used. However, this system can be only used in out-sides. Furthermore, the use of the GPS in sensor networks is not efficient due to the low power consumption. Hence, we propose methods for the location positioning which is runnable at indoor in this paper. The proposed methods elaborate the location positioning system via applying K-NN(K-Nearest Neighbour) Algorithm with its intermediate values based on IEEE 802.15.4 technology; which is mostly used for the sensor networks. Logically the accuracy of the location positioning is proportional to the number of sampling sensor nodes' RSS according to the K-NN. By the way, numerous sampling uses a lot of sensor networks' resources. In order to reduce the number of samplings, we, instead, attempt to use the intermediate values of K-NN's signal boundaries, so that our proposed methods are able to positioning almost two times as accurate as the general ways of K-NN's result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.165-170
• /
• 2015

The topic of this paper is the advanced absolute altitude determination for 3-D positioning using barometric altimeter and the reference station. Barometric altimeter does not provide absolute altitude because atmosphere pressure always varies over the time and geographical location. Also, since Global Navigation Satellites system such as GPS, GLONASS has geometric error, the altitude information is not available. It is the reason why we suggested the new method to improve the altitude accuracy. This paper shows 3-D positioning algorithm using absolute altitude determination method and evaluates the algorithm by real field tests. We used an accurate altitude from RTK system in Seoul as a reference data and acquired the differential value of pressure data between a reference station and a mobile station equipped in low cost barometric altimeter. In addition, the performance and advantage of the proposed method was evaluated by 3-D experiment analysis of PNS and CNS. We expect that the proposed method can expand 2-D positioning system 3-D position determination system simply and this 3-D position determination technique can be very useful for the workers in the field of fire-fighting and construction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.1025-1031
• /
• 2007

GPS is widely used for positioning applications and attitude of a vehicle can be found also with multiple antennas. However, extremely weak signal level prevents GPS from indoor operation. DR with accelerometers and gyros and landmark based localization method used for indoor applications increase complexity and cost. In this paper, a simple but very efficient ultrasound based attitude determination system which determines both position and attitude in WSN is given. The range between transmitter and receivers are measured using the arrival time difference between ultrasound and RF signal. The 3 dimensional positions can be found using more than 3 range measurements. Furthermore, if more than 2 transmitters are used, the attitude can be determined using the baseline vectors obtained by differencing transmitter and receiver positions. The prototype system is implemented to evaluate the performance of the proposed method. In addition, an error analysis shows the relation between the attitude error and basel me length, quality of measurement and orientation of a vehicle. The static and dynamic experiments performed by micro mobile robot shows accurate position with less than 1.5cm error and attitude with less than 1 degree error can be obtained continuously with 20cm baseline. It is expected that these results can be adapted without modification to indoor applications such as home cleaning robot and autonomous wheelchair maneuvering.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.603-605
• /
• 2021

With the expansion of the indoor service-providing robot market and the electrification of automobiles, research on autonomous driving is being actively conducted. In general, in the case of outside, the location is mainly recognized through GPS, and location positioning is performed indoors using technologies such as WiFi, UWB (Ultra-Wide Band), VLP, LiDAR, and Vision. In this paper, we introduce a system for location-positioning using LED lights with different color temperatures in an indoor environment. After installing LED lights in a simulated environment such as a tunnel, it was shown that information about the current location can be obtained through the analysis of chromaticity values according to location. Through this, it is expected to be able to obtain information about the location of the vehicle in the tunnel and the movement of the device in a room such as a warehouse or a factory.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.4
• /
• pp.1-7
• /
• 2012

This paper proposes a new indoor location recognition system using a ZigBee network and a global positioning system(GPS). The proposed location recognition system applies GPS values that are mainly used for outdoor location recognition, to indoor location recognition; hence the techniques conventionally separated for the indoor and outdoor location recognition are integrated into one location recognition technique. The proposed system recognizes a location using the distance between nodes. Although the distance between nodes can be calculated by measuring the strength of the received ZigBee signals, generally the measured distance is not accurate and has high error rates since the strength of the ZigBee signals is different depending on the distance. In order to reduce the error rate, we have subdivided the output power of the received ZigBee signals into five levels. When a moving node generates a signal, each fixed node transmits the received signal strength and its own GPS information to other nodes, so the moving node can find its own accurate location in terms of the received signals.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1606-1611
• /
• 2005

The goal of this paper is to develop a self localization of mobile robot using UHF RFID landmark. We present landmark, a location sensing archetype system that uses UHF Radio Frequency Identification (UHF RFID) technology for locating objects inside buildings. The major advantage of landmark is that it improves the overall accuracy of locating objects by utilizing the concept of reference tags. Based on experimental analysis, we demonstrate that passive UHF RFID is a viable and cost-effective candidate for indoor location sensing. We conduct a series of experiments to evaluate performance of the positioning of the landmark System. In the standard setup, we place RF Reader which has two antennas and 25 tags in our lab. This research uses the assumption-based coordinates (ABC) algorithm[3] for determining the localization of robot. Also, we show how Radio Frequency Identification (UHF RFID) can be used in robot-assisted indoor navigation for the visually impaired. The experiments illustrate that passive UHF RFID tags can act as reliable landmark that trigger local navigation behaviors to achieve global navigation objectives.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1448-1451
• /
• 2004

Position estimation is one of the most important functions for the mobile robot navigating in the unstructured environment. Most of previous localization schemes estimate current position and pose of mobile robot by applying various localization algorithms with the information obtained from sensors which are set on the mobile robot, or by recognizing an artificial landmark attached on the wall, or objects of the environment as natural landmark in the indoor environment. Several drawbacks about them have been brought up. To compensate the drawbacks, a new localization method that estimates the absolute position of the mobile robot by using a fixed camera on the ceiling in the corridor is proposed. And also, it can improve the success rate for position estimation using the proposed method, which calculates the real size of an object. This scheme is not a relative localization, which decreases the position error through algorithms with noisy sensor data, but a kind of absolute localization. The effectiveness of the proposed localization scheme is demonstrated through the experiments.