• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.9
• /
• pp.963-968
• /
• 2008

A new method to deal with GPS indoor positioning by means of time synchronized switching GPS repeater has been developed by authors[1]. But the developed indoor positioning system has problems. Therefore, we proposed a method for indoor positioning using GNSS Repeater-Assisted. To solve the 3-dimensional user's position, the 4 or more retransmission antennas are needed in the previously proposed methods. If a GPS repeater periodically transmits the signal like as pseudollite, the information for assisting an acquisition and tracking can be informed to receiver. Then, the user position can be calculated using the induced weak signal. The advantage of the proposed algorithm is use of only 1 re-transmission antenna because the re-transmitted signal are not used for positioning but used for assisting an acquisition and tracking weak signals induced indoor. We analyze the propose algorithms through the experiment and performed the test of feasibility.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.586-591
• /
• 2015

In recent years, along with the rapid development of LED technology, indoor positioning systems based on visible light communication (VLC) have been researched. In this paper, we propose an accurate indoor positioning method using white-light LEDs and a dual image sensor. Indoor LED lights are located at the ceiling in a room and broadcast information on their positions using VLC technology. A mobile device with a dual image sensor receives LED position information by VLC and estimates its position and azimuth angle. Simulation and experimental results are given to show the performance of the proposed indoor positioning system.

• The Journal of Information Systems
• /
• v.17 no.1
• /
• pp.131-153
• /
• 2008

So many location based service systems, including automobile navigation system logistic management, taxi fleet management, and so on, are being used everywhere. However, these are all outdoors. This paper provides a stepping stone for commercial indoor location based services by developing an integrated system of our indoor positioning and map viewer modules. For the indoor positioning, we propose WLAN (Wireless Local Area Network) based EKF (Extended Kalman Filter) which estimates user's current location and tracts user's trace in the sequence of time. Our map viewer renders a map recorded in an Autocad DXF file and provides functions of map manipulation such as zoom-in, zoom-out, and move. We integrate our indoor positioning and map viewer modules and discuss the experimental results of the integrated system.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.312-314
• /
• 2005

We have implement indoor positioning system to supply orientation information, We have used ultrasound in indoor positioning system for distance and orientation measurements, then propose a set of methods to calculate orientation from an array of well placed ultrasonic sensors operating in the indoor positioning system, We have design and implement a indoor positioning system using a combination of hardware and software and demonstrate end-to-end functionality of the system, We have implement ZigBee based home automation system using location-aware System.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.6
• /
• pp.55-62
• /
• 2016

In this paper, we present indoor positioning technologies using the wireless signal categorizing them into triangulation based, fingerprinting based, and cell ID based technologies. We describe several representative techniques for each of them emphasizing their strengths and weaknesses. We define important performance issues for indoor positioning technologies and analyze recent technologies according to the performance issues. We believe that this paper provide wise view and necessary information for recent indoor positioning technologies using wireless signals.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.1951-1972
• /
• 2018

Wi-Fi Access Point (AP) optimization approaches are used in indoor positioning systems for signal coverage enhancement, as well as positioning precision improvement. Although the huge power consumption of the AP optimization forms a serious problem due to the signal coverage requirement for large-scale indoor environment, the conventional approaches treat the problem of power consumption independent from the design of indoor positioning systems. This paper proposes a new Fast Water-filling algorithm Group Power Constraint (FWA-GPC) based Wi-Fi AP optimization approach for indoor positioning in which the power consumed by the AP optimization is significantly considered. This paper has three contributions. First, it is not restricted to conventional concept of one AP for one candidate AP location, but considered spare APs once the active APs break off. Second, it utilizes the concept of water-filling model from adaptive channel power allocation to calculate the number of APs for each candidate AP location by maximizing the location fingerprint discrimination. Third, it uses a fast version, namely Fast Water-filling algorithm, to search for the optimal solution efficiently. The experimental results conducted in two typical indoor Wi-Fi environments prove that the proposed FWA-GPC performs better than the conventional AP optimization approaches.

• Journal of Power System Engineering
• /
• v.17 no.5
• /
• pp.100-111
• /
• 2013

Indoor real-time positioning for multiple targets is required to realize human-robot symbiosis. This study firstly presents positioning accuracy on an autonomous mobile robot controlled by 3-D coordinates that is obtained by a real-time indoor positioning system with spread spectrum (SS) ultrasonic signals communicated by code-division multiple access. Although many positioning systems have been investigated, the positioning system with the SS ultrasonic signals can measure identified multiple 3-D positions in every 70 ms with noise tolerance and error within 100 mm. This system is also robust to occlusion and environmental changes. However, thus far, the positioning errors in an autonomous mobile robot, controlled by these systems using the SS ultrasonic signals, have not been evaluated as an experimental study. Therefore, a positioning experiment for trajectory control is conducted using an autonomous mobile robot and our positioning system. The effectiveness of this positioning method for robot self-localization is shown, from this experiment, because the average control error between the target position and the robot's position at 29 mm is obtained.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.71-80
• /
• 2012

LBS (Location Based Service) services are very useful to our daily life and it should be available inside a building: a huge building, a shopping mall, a large scale underground shopping center, and so on where GPS (Global Positioning System) signal is not available. An LBS which is provided inside a building is called an ILBS (Indoor Location Based Service). One of the most important techniques for ILBS development is indoor positioning. Among the indoor positioning techniques, APs (access points) of WLAN based ones are most economical because WLAN is available almost everywhere. Meanwhile, the web service has been proved to be an excellent practice of software reuse. Therefore, if indoor positioning is provided in the form of web service to programmers then development of ILBS would be greatly accelerated. This paper introduces the AP based trilateration and K-NN indoor positioning and RFID based indoor positioning web services we have developed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.277-290
• /
• 2019

The demand for indoor positioning is increasing day by day. However, the widely used positioning methods today cannot satisfy the requirements of the indoor environment in terms of the positioning accuracy and deployment cost. In the existing research domain, the localization algorithm based on three-dimensional space is less accurate, and its robustness is not high. Visible light communication technology (VLC) combines lighting and positioning to reduce the cost of equipment deployment and improve the positioning accuracy. Further, it has become a popular research topic for telecommunication and positioning in the indoor environment. This paper proposes a surface centroid TOA localization algorithm based on the VLC system. The algorithm uses the multiple solutions estimated by the trilateration method to form the intersecting planes of the spheres. Then, it centers the centroid of the surface area as the position of the unknown node. Simulation results show that compared with the traditional TOA positioning algorithm, the average positioning error of the surface centroid TOA algorithm is reduced by 0.3243 cm and the positioning accuracy is improved by 45%. Therefore, the proposed algorithm has better positioning accuracy than the traditional TOA positioning algorithm, and has certain application value.

• Spatial Information Research
• /
• v.23 no.3
• /
• pp.1-10
• /
• 2015

Due to recent improvement of various sensor technologies, indoor positioning becomes available. However, Indoor positioning technologies by Wi-Fi radio map and acceleration sensor and digital campus still have a certain level of errors and a number of researches have been done to increase the positioning accuracy of the indoor positioning. If we could provide a room level accuracy, indoor location based services with current indoor positioning methods such as Wi-Fi radio map and acceleration sensors would be possible. In this paper, we propose an indoor map matching method to provide a room level accuracy based on hidden markov model.