• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.1
• /
• pp.95-103
• /
• 2000

In this paper, a novel indirect rotor position sensing method is proposed to improve the performClIlce of sensorless drive of brushless DC motors. The fast mode change to the sensorless operation is difficult in the existing indirect rotor position sensing methods because a precise rotor position can not be obtained when an excessive input is applied to the drive during synchronous operation mode. To cope with this problem, the relationship between terminal voltage and back-emf waveform is analyzed in this paper, also a novel indirect position sensing method which can detect a precise rotor position at low speed range is proposed. The effectiveness of the proposed method is verified through the experimental results.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.31-36
• /
• 1999

In this paper, a novel indirect rotor position sensing method is proposed to improve the performance of sensorless drive of brushless DC motors. Fast mode change to the sensorless operation is difficult in the existing indirect rotor position sensing methods because precise rotor position can not be obtained when an excessive input is applied to the drive during synchronous operation mode. To cope with this problem, the relationship between terminal voltage and back-emf waveform is analyzed in this paper, also a novel indirect position sensing method which can detect a precise rotor position at low speed range is proposed. The effectiveness of the proposed method is verified through the experimental results.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.507-515
• /
• 2002

Remote Sensing Monitoring and Loss Estimated System of Flood Disaster based on GIS is an integrated system comprised flood disaster information receiving and collection, flood disaster simulation, and flood disaster estimation. When the system receives and collects remote sensing monitoring and conventional investigation information, the distributional features of flood disaster on space and time is obtained by means of image processing and information fusion. The economic loss of flood disaster can be classified into two pus: direct economic loss and indirect economic loss. The estimation of direct economic loss applies macroscopic economic analysis methods, i.e. applying Product (Industry and Agriculture Gross Product or Gross Domestic Product - GDP) or Unit Synthetic Economic Loss Index, direct economic loss can be estimated. Estimating indirect economic loss applies reduction coefficient methods with direct economic loss. The system can real-timely ascertains flood disaster and estimates flood Loss, so that the science basis fur decision-making of flood control and relieving disaster may be provided.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.3
• /
• pp.44-50
• /
• 1997

This paper describes an indirect sensing method for the rotor flux position of interior permanent magnet (IPM) brushless DC motors. The phase inductances of an IPM motor vary appreciably according to the rotor position. The waveform characteristics of the terminal voltage of IPM brushless DC motors is analysed and a simple and practical method for indirect sensing of the rotor position is proposed. A compact and economical sensorless drive is implemented and tested using a 87c196mc 16-bit one-chip microprocessor. The experimental results show the validity of the proposed method. The drive is applied to drive a compressor of air-conditioner and works well from 1,200 to 6,600 [rpm].

• Korean Journal of Remote Sensing
• /
• v.18 no.6
• /
• pp.327-336
• /
• 2002

Ever since high resolution satellites were launched, high-resolution satellite images have been utilized in many areas. This paper proposed methods of generating simulated satellite image using DEM(Digital Elevation Model) and digital image such as aerial photograph. There are two methods proposed in the paper: one is Direct-Indirect method and the other Indirect-Indirect, method. It is assumed that satellite attitude is not changing and perspective center is moving in the direction of flight while image is captured. The proposed methods were implemented with aerial photograph, DEM data, arbitrary orbit parameters and attitude parameters of high resolution satellite image under generation. Furthermore, for the stereo viewing, different orientation parameters and perspective center were tested for generating simulated satellite image. In addition, the quality and accuracy of the simulated satellite image generated by the proposed methods were analyzed.

• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.14-20
• /
• 2021

The objective of this study is to introduce the new possibility of sensing technology based on inductive displacement sensors to monitor the status of wheel position in the hot forging process. In order to validate effectiveness of proposed sensing technology, the indirect forging force measurement with displacement sensor was applied into a typical closed hot forging die-set used for the manufacturing of flange bolts. The locations to implement the displacement sensor were selected carefully by simulating forming process and static structural. From the measurement results of the forging force change during one hot forging cycle, it was found that the proposed monitoring system can provide useful information to understand the detailed behaviors of die-set in the closed hot forging process.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2095-2097
• /
• 1997

This paper describes a indirect sensing method for the rotor flux position of interior permanent magnet (IPM) brushless DC motors. The phase inductance of an IPM motor varies appreciably according to the rotor position. The waveform characteristics of the terminal voltage of IPM brushless DC motors is analysed and a simple and practical method for indirect sensing of the rotor position is proposed. A compact sensorless drive is implemented and tested using a 87c196mc 16-bit microcomputer. The experimental results show the validity of the proposed method and the drive works well from 500 to 7,200rpm.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.591-595
• /
• 2000

In this paper we proposed a new sensorless drive system for the trapezoidal type brushless DC motor which does not use any mechanical position or speed sensor and applicable to the systems requiring a constant speed and torque such as Fan. For this a novel indirect rotor position sensing technique based on a detailed analysis of the terminal voltage characteristics is proposed in this paper. And a sensorless drive system for the brushless DC motor is implemented using a 87c196mc fo the main microprocessor and a power FET for the inverter. The experimental results will show the validity of the proposed indirect sensing method and the practical use of the sensorless drive

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.2
• /
• pp.63-68
• /
• 1999

This pper describes a digital sensorless drive of permanent magnet brushless DC motors. In order to detect in real time the rotor positions of which Emf becomes zero, terminal voltages are sampled during PWM duty cycle. This method generates detection error in indirect sensed position, which is the harmonic component of PWM frequency. In this paper, the drive adopted Butterworth low pass filter for rejection of the sensing error and for accurate estimation of commutation time. Analytical design process of the digital filter is proposed and the experimental results show that the performance of the proposed sensorless drive is superior to that of the sensorless drives without filterint.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.653-657
• /
• 1996

This paper presents adaptive cutting force control in milling process using indirect cutting force measurement. The cutting forces in X, Y, and Z axes are measured indirectly from the sensing current of the feed-drive servo motor. After modelling the feed-drive system of a horizontal machining center, the relation between the cutting force and the servo motor current is analyzed. The pulsating milling forces are measured from the sensing current within the bandwidth of the servo. It is shown that indirect cutting farce measurement can be used in adaptive cutting force control. The adaptive control scheme which is globally convergent and stable is attached to a commercial CNC machining center. Cutting experiments on end milling are performed for diagonal cutting.