• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.195.1-195.1
• /
• 2016

Currently, as Plasma application is expanded to the industrial and medical industrial, low temperature plasma applications became important. Especially in medical and biology, many researchers have studied about generated radical species in atmospheric pressure low temperature plasma directly adapted to human body. Therefore, so measurement their plasma parameter is very important work and is widely studied all around world. One of the plasma parameters is electron density and it is closely relative to radical production through the plasma source. some kinds of method to measuring the electron density are Thomson scattering spectroscopy and Millimeter-wave transmission measurement. But most methods have very expensive cost and complex configuration to composed of experiment system. We selected Michelson interferometer system which is very cheap and simple to setting up, so we tried to measuring electron density by laser interferometer with laser beam chopping module for measurement of temporal phase difference in plasma jet. To measuring electron density at atmospheric pressure Ar plasma jet, we obtained the temporal phase shift signal of interferometer. Phase difference of interferometer can occur because of change by refractive index of electron density in plasma jet. The electron density was able to estimate with this phase difference values by using physical formula about refractive index change of external electromagnetic wave in plasma. Our guiding laser used Helium-Neon laser of the centered wavelength of 632 nm. We installed chopper module which can make a 4kHz pulse laser signal at the laser front side. In this experiment, we obtained more exact synchronized phase difference between with and without plasma jet than reported data at last year. Especially, we found the phase difference between time range of discharge current. Electron density is changed from Townsend discharge's electron bombardment, so we observed the phase difference phenomenon and calculated the temporal electron density by using phase shift. In our result, we suggest that the electron density have approximately range between 1014~ 1015 cm-3 in atmospheric pressure Ar plasma jet.

• 한국항만경제학회지
• /
• 제28권4호
• /
• pp.193-207
• /
• 2012

본 연구는 의사결정나무분석을 이용하여 컨테이너 수출입 물동량을 예측한다. 컨테이너 수출입 물동량에 영향을 미칠 가능성이 있는 요인을 독립변수로 선정하였는데, 생산자물가지수와 소비자물가지수, 수출물량지수와 수입물량지수, 미국과 한국의 산업생산지수, 그리고 원/달러 환율을 선정하였다. 분석기간은 2002년 1월부터 2011년 12월까지 10년간의 월별자료를 이용하였으며, 의사결정나무를 형성하기 위해 다양한 알고리즘이 제안되고 있는데, CRT(Classification and Regression Trees)알고리즘을 활용하였다. 분석결과는 첫째, 컨테이너 수출물동량에 대한 최적분리는 수출물량지수에 의해 분리되었다. 수출물량지수는 115.90으로 분리되어 지는데, 수출물량지수가 115.90보다 큰 경우는 다시 수출물량지수가 152.35보다 큰 경우와 115.90과 152.35사이인 경우로 분리되어진다. 여기서 수출물량지수가 152.35보다 큰 경우는 858,191TEU/(월)이고, 115.90과 152.35사이인 경우는 716,582TEU/(월)로 컨테이너 수출물동량이 예측된다. 둘째, 컨테이너 수입 물동량에 대한 최적분리는 수입물량지수에 의해 분리되었다. 수입물량지수가 116.20에서 분리되어 지는데, 수입물량지수가 116.20보다 큰 경우는 다시 수입물량지수가 134.60보다 큰 경우와 116.20과 134.60사이인 경우로 분리되어진다. 여기서 수입물량지수가 134.60보다 큰 경우는 869,227TEU/(월)이고, 116.20과 134.60사이인 경우는 738,724TEU/(월)로 컨테이너 수입물동량이 예측된다.

• 공업화학
• /
• 제33권4호
• /
• pp.373-380
• /
• 2022

본 연구에서는 화재 시 연기안전 등급 평가를 표준화하기 위해 Chung's equations 1, 2와 3을 확장하여 Chung's equations-V인 연기성능지수-V와 연기성장지수-V를 산정하였다. 5종류의 목재를 선별하여 ISO 5660-1의 규격에 의한 콘칼로리미터(cone calorimeter)법으로 연기지수들을 측정하였다. Chung's equation-VI에 따라 연기위험성지수-VI에 의한 연기위험성을 등급화 하였다. 연기위험성지수-VI는 PMMA(1) ≈ 단풍나무(1.01) < 물푸레나무(1.57) < 전나무(4.98) < 오동나무(46.15) < 적삼목(106.26)의 순서로 증가하였다. 단풍나무, 물푸레나무의 연기위험성이 가장 낮고, 오동나무, 적삼목이 가장 높은 것으로 예측되었다. 시험편 5종의 일산화탄소 평균생성속도는 0.0009~0.0024 g/s으로 나타났으며, 이들 목재는 기준 물질인 polymethyl methacrylate보다 불완전연소 물질임을 나타내었다. 선정된 목재들의 연기특성은 체적밀도가 높을수록 연기성능지수-V (SPI-V)이 증가하였고, 연기위험성지수-VI (SRI-VI)가 감소하였다.

• 대한인간공학회지
• /
• 제28권4호
• /
• pp.77-82
• /
• 2009

This paper objected which prevented the accident occurrence of the related farm work, and developed the evaluation indicators for safety supervision on life environment of farmer and farm work to evaluate the health of farm worker and a musculoskeletal disorders. We selected the evaluation item to 82 items for executing the secondary Delphi investigation and the literature research which composed the farm work relationship specialist conference. We applied the index production of the evaluation indicators to decide the detailed element weight from the element which is farm work, the farm machine and the organization, farm workshop, dangerous substance, and life environment through the AHP techniques. Through the result, we can apply other ergonomic evaluation instrument of farm work field, but also the evaluation indicators for safety supervision on farm work.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.23-32
• /
• 1999

Reliability and maintainability allocation in the analysis of the system's design, with the objective of planning and installing the individual components in such a way that the system performance is achieved. This paper has been made to solve an important task in reliability management of manufacturing systems within the general objective being to increase productivity while maintaining costs low. Thus, the purpose of this paper is to provide an analytical approach to determine an optimal reliability and maintainability allocation, trading off among system performance and parts investment costs. Two important considerations will be addressed in this regard : (ⅰ) determine the reliability and maintainability allocation of parts which maximizes a given production index, having fixed the total cost of investments ; and (ⅱ) determine the reliability and maintainability allocation which minimizes the total cost of investments, having fixed a minimum acceptable level of productivity. The procedure proposed in this paper is able to provide to managers and designers useful indications on the reliability and maintainability characteristics of parts in series -parallel systems. And this heuristic model is a decision support tool for contractors who are involved in large scale design projects such as ship and aircraft design. Numerical examples prove that an approximate expression of the average throughput rate is sufficiently accurate to be used in a numerical optimization method.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제43권2호
• /
• pp.99-103
• /
• 2021

In the present study, twelve bivoltine silkworm races were evaluated for its performance based on quantitative and qualitative traits. Seven oval and five peanut cocoon shaped races were reared in different seasons of the year. By using evaluation index method, the results showed that six races were identified as potential parental races. Among oval races, 75xin, KoC, KoZ and among peanut races An 902, 7532 and QD7 were selected as base material. The identified high yielding races will be used in various breeding programs as initial parents for the production of superior bivoltine breeds/hybrids in Vietnam

• 무역학회지
• /
• 제46권1호
• /
• pp.113-134
• /
• 2021

This study analyzed the centrality of the GVCs network and the value-added-based production structure of the electrical and electronic industries using ADB-MIRO and social network analysis methods. According to the analysis, the centrality and power of the GVSc intermediate goods network were differentiated into China, the United States, and the EU due to the advancement of industrial structure in Asia. In the 2000 network, the United States and Japan had a very strong influence in all aspects, including connectivity and strength. However, in 2017, China's power index rose to number one among 62 countries in the network. Furthermore, this study presented strategic implications of the Korean electrical and electronic industries to respond to the reorganization of GVSs based on the analysis results.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.127-134
• /
• 2012

Plant safety management that is enforcing introducing more than 95% in domestic manufacturing industry is using total plant efficiency by the evaluation index, and as a result, can see a lot of examples that plant productivity, economy and safety is increased. The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. This study's purpose centers plant safety management activities that is management system for plant production and safety efficiency's maximization, plant evaluation system that plant safety management activities factor(reliability, maitainability, safety, service quality) that is enforcing in manufacturing industry can develop evaluation model that can evaluate qualitative activities by quantitative activities in process that maximize plant safety management wishes to do design.

• Asia pacific journal of information systems
• /
• 제4권1호
• /
• pp.3-31
• /
• 1994

Potential employers considering locations for production or service facilities typically equire detailed advance knowledge of the wages they will be expected to offer for workers in various occupational categories. The State of Missouri s Department of Labor and Industrial Relations is often contacted by organizations requesting such information. The current wage rate survey approach, initiated in 1988, allows the Department to predict an appropriate wage rate for a given occupation in certain counties, adjusted for changes in the Consumer Price Index (CPI). However, both Department employees and firms have indicated that improved prediction responsiveness and accuracy are desirable. A major deficiency of the current approach is its inability to predict wages for unsurveyed counties. This paper describes a knowledge-based system (KBS), currently in the prototype testing stage, that is expected to supplement the wage rate survey in the near future.

• 산업공학
• /
• 제12권3호
• /
• pp.374-381
• /
• 1999

In this paper, we propose an architecture of the DNC system for Shop Floor Control/Point of Production(SFC/POP). The DNC system to be presented this paper retrieves line-up sheets which include the drawing information, making a index database for line-up sheets, NC programs and tool adjustment data. And it is interface with a raw material, jig and tool information. Also, the DNC system transmits operation information to real workers rapidly, and supports realtime monitoring by collecting the state information of machines directly. In the analysis and design phases, this paper models realtime events using the state transition diagrams. In the implementation phase, we use the ORACLE DBMS(Database Management System) as the DBMS and Developer 2000 and Microsoft Visual C++ 5.0 as the programming tools.