• 제목/요약/키워드: independent mode and system

검색결과 147건 처리시간 0.024초

Performance analysis of SWIPT-assisted adaptive NOMA/OMA system with hardware impairments and imperfect CSI

  • Jing Guo;Jin Lu;Xianghui Wang;Lili Zhou
    • ETRI Journal
    • /
    • 제45권2호
    • /
    • pp.254-266
    • /
    • 2023
  • This paper investigates the effect of hardware impairments (HIs) and imperfect channel state information (ICSI) on a SWIPT-assisted adaptive nonorthogonal multiple access (NOMA)/orthogonal multiple access (OMA) system over independent and nonidentical Rayleigh fading channels. In the NOMA mode, the energy-constrained near users act as a relay to improve the performance for the far users. The OMA transmission mode is adopted to avoid a complete outage when NOMA is infeasible. The best user selection scheme is considered to maximize the energy harvested and avoid error propagation. To characterize the performance of the proposed systems, closed-form and asymptotic expressions of the outage probability for both near and far users are studied. Moreover, exact and approximate expressions of the ergodic rate for near and far users are investigated. Simulation results are provided to verify our theoretical analysis and confirm the superiority of the proposed NOMA/OMA scheme in comparison with the conventional NOMA and OMA protocol with/without HIs and ICSI.

Comparison of Effectiveness for Performance Tuning of Liquid Rocket Engine

  • Cho, Won Kook;Kim, Chun Il
    • International Journal of Aerospace System Engineering
    • /
    • 제5권2호
    • /
    • pp.16-22
    • /
    • 2018
  • An analysis has been made on the performance variation due to pressure drop change at propellant supply pipes of liquid rocket engine. The objective is to compare the effectiveness of control variables to tune the liquid rocket engine performance. The mode analysis program has been used to estimate the engine performance for different modes which is realized by controlling the flow rate of propellant. The oxidizer of combustion chamber, the fuel of combustion chamber, the oxidizer of gas generator and the fuel of gas generator are the independent variables to control engine thrust, engine mixture ratio and temperature of gas generator product gas. The analysis program is validated by comparing with the powerpack test results. The error range of compared variables is order of 4%. After comparison of tuning effectiveness it is turned out that the pressure drop at oxidizer pipe of gas generator and pressure drop at combustion chamber fuel pipe and the pressure drop at the fuel pipe of gas generator can effectively tune the thrust of engine, mixture ratio of engine and temperature of product gas from gas generator respectively.

Mitigation of Voltage Unbalances in Bipolar DC Microgrids Using Three-Port Multidirectional DC-DC Converters

  • Ahmadi, Taha;Rokrok, Esmaeel;Hamzeh, Mohsen
    • Journal of Power Electronics
    • /
    • 제18권4호
    • /
    • pp.1223-1234
    • /
    • 2018
  • In this paper, a new three-port multidirectional DC-DC converter is proposed for integrating an energy storage system (ESS) to a bipolar DC microgrid (BPDCMG). The proposed converter provides a voltage-balancing function for the BPDCMG and adjusts the charge of the ESS. Thanks to the multi-functional operation of the proposed converter, the conversion stages of the system are reduced. In addition, the efficiency and weight of the system are improved. Therefore, this converter has a significant capability when it comes to use in portable BPDCMGs such as electric DC ships. The converter modes are analyzed and small-signal models of the converter in each of the independent modes are extracted. Finally, comprehensive simulation studies are carried out and a BPDCMG laboratory prototype is implemented in order to verify the performance of the proposed voltage balancer using the burst mode control scheme.

탄성적으로 지지된 광디스크 드라이버의 진동모드와 주파수 응답의 기하적 해석 (The Geometrical Analysis of Vibration Modes and Frequency Responses of an Elastically Suspended Optical Disc Drive)

  • 단병주;최용제
    • 대한기계학회논문집A
    • /
    • 제24권2호
    • /
    • pp.362-369
    • /
    • 2000
  • Via screw theory, a vibration mode can be geometrically interpreted as a pure rotation about the vibration center in a plane and as a twisting motion on a screw in a three dimensional space. In thi s paper, applying the conditions that can be used to diagonalize the stiffness matrix by a parallel axis congruence transformation, the vibration modes and frequency response of an elastically suspended optical disc drive have been analyzed. It is first shown that the system has one plane of symmetry, which enables one to decouple the complicated vibration modes into two sets of modes independent of each other. Having obtained the analytical solutions for the axes of vibrations, the frequency response for a given applied input force has been demonstrated. Most importantly, it has been explained that this research result could be used in the synthesis process of a linear vibration system in order to improve the frequency response.

Construction of Practical Teaching System of Database Principles based on Core Literacy

  • JIN, Hua
    • Journal of Information Technology Applications and Management
    • /
    • 제27권2호
    • /
    • pp.23-36
    • /
    • 2020
  • The promulgation of the overall framework of Chinese students' development of core literacy has made the implementation of core literacy into specific teaching activities an urgent problem to be solved in the field of education. Based on the analysis of the problems existing in the undergraduate education under the mode of emphasizing theory and neglecting practice, this paper constructs the practical teaching system of Database Principle Course Based on the core quality, expounds the implementation strategy of practical teaching, and probes into how to train the students in the practical teaching of database principle Cultivate scientific spirit, learning ability, practical innovation, responsibility and other core literacy. After 5 rounds of practice, students have achieved better development in independent development and collaborative work, and their awareness of practical innovation has been significantly improved.

실시간 음성인식 다이얼링 시스템 개발 (Development of a Real-time Voice Recognition Dialing System;)

  • 이세웅;최승호;이미숙;김흥국;오광철;김기철;이황수
    • 정보와 통신
    • /
    • 제10권10호
    • /
    • pp.22-29
    • /
    • 1993
  • This paper describes development of a real-time voice recognition dialing system which can recognize around one hundred word vocabularies in speaker independent mode. The voice recognition algorithm is implemented on a DSP board with a telephone interface plugged in an IBM PC AT/486. In the DSP board, procedures for feature extraction, vector quantization(VQ), and end-point detection are performed simultaneously in every 10msec frame interval to satisfy real-time constraints after the word starting point detection. In addition, we optimize the VQ codebook size and the end-point detection procedure to reduce recognition time and memory requirement. The demonstration system is being displayed in MOBILAB of Korea Mobile Telecom at the Taejon EXPO '93.

  • PDF

태양광모듈과 리튬이온전지를 이용한 가동보용 친환경 전원공급장치의 설계 및 구현 (Design and Implementation of Eco-friendly Power Supply System for Moveable-weir Using PV Module and Li-ion Battery)

  • 강민관;최성식;남양현;이후동;박지현;노대석
    • 전기학회논문지
    • /
    • 제67권2호
    • /
    • pp.186-193
    • /
    • 2018
  • Generally, it is difficult to operate moveable-weir due to the expensive cost of the facility management and manpower consumption. Also, when it is installed in a remote area, there is a problem that the cost of connection for power system increases as well as the operating cost. Therefore, this paper proposes an optimal design algorithm to replace an existing power system with an Eco-friendly power supply system for movable-weir using PCS, PV module and lithium-ion battery. Also, this paper proposes a modeling method of environment-friendly power supply system for a movable-weir based on the PSCAD/EMTDC S/W and implements 5[kW] prototype environment-friendly power supply system. As a result of the performance test using the S/W modeling and the prototype system, it is confirmed that the proposed system has stable characteristics in the independent operation mode and the interconnection mode.

총채널 불확실도를 적용한 원전 노심출구온도의 운전가능 판정기준 (Operating Criteria of Core Exit Temperature in Nuclear Power Plant with using Channel Statistical Allowance)

  • 성제중;윤덕주;하상준
    • 한국안전학회지
    • /
    • 제29권6호
    • /
    • pp.166-171
    • /
    • 2014
  • Nuclear power plants are equipped with the reactor trip system (RTS) and the engineered safety features actuation system (ESFAS) to improve safety on the normal operation. In the event of the design basis accident (DBA), a various of post accident monitor(PAM)systems support to provide important details (e.g. Containment pressure, temperature and pressure of reactor cooling system and core exit temperature) to determine action of main control room (MCR). Operator should be immediately activated for the accident mitigation with the information. Especially, core exit temperature is a critical parameter because the operating mode converts from normal mode to emergency mode when the temperature of core exit reaches $649^{\circ}C$. In this study, uncertainty which was caused by exterior environment, characteristic of thermocouple/connector and accuracy of calibrator/indicator was evaluated in accordance with ANSI-ISA 67.04. The square root of the sum of square (SRSS) methodology for combining uncertainty terms that are random and independent was used in the synthesis. Every uncertainty that may exist in the hardware which is used to measure the core exit temperature was conservatively applied and the associative relation between the elements of uncertainty was considered simultaneously. As a result of uncertainty evaluation, the channel statistical allowance (CSA) of single channel of core exit temperature was +1.042%Span. The range of uncertainty, -0.35%Span ($-4.05^{\circ}C$) ~ +2.08%Span($24.25^{\circ}C$), was obtained as the operating criteria of core exit temperature.

시간 지연을 포함하는 비선형 네트워크 시스템의 퍼지 제어 (Networked Nonlinear Control Systems with Time-Delay via T-S Fuzzy Approach)

  • 송민국;박진배;주영훈;김종선
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
    • /
    • pp.390-392
    • /
    • 2009
  • This paper is concerned with the stabilization problem of nonlinear networked control systems with time-delay via Takagi-Sugeno(T-S) fuzzy control approach. The T-S fuzzy models are employed to represent nonlinear systems with Markovian jump parameters and time-delay. The purpose of this paper is to design a fuzzy controller such that the closed-loop Markovian jump fuzzy system is stochastically stable. Based on a stocastic Lyapunov function, stabilization sufficient conditions using a mode-independent fuzzy controller are derived for the Markovian jump fuzzy system in terms of Linear Matrix Inequalities(LMIs). Finally, a simulation example is presented to illustrate the effectiveness of the proposed method.

  • PDF

시간 지연을 포함하는 비선형 네트워크 시스템의 퍼지 제어 (Networked Nonlinear Control Systems with Time-Delay via T-S Fuzzy Approach)

  • 송민국;박진배;김진규;주영훈
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
    • /
    • pp.329-331
    • /
    • 2009
  • This paper is concerned with the stabilization problem of nonlinear networked control systems with time-delay via Takagi-Sugeno(T-S) fuzzy control approach. The T-S fuzzy models are employed to represent nonlinear systems with Markovian jump parameters and time-delay. The purpose of this paper is to design a fuzzy controller such that the closed-loop Markovian jump fuzzy system is stochastically stable. Based on a stocastic Lyapunov function, stabilization sufficient conditions using a mode-independent fuzzy controller are derived for the Markovian jump fuzzy system in terms of Linear Matrix Inequalities(LMIs). Finally, a simulation example is presented to illustrate the effectiveness of the proposed method.

  • PDF