• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.657-662
• /
• 2003

This paper presents a new fabrication method of selective SiGe epitaxial growth at 650 $^{\circ}C$ on (100) silicon wafer with oxide patterns by reduced pressure chemical vapor deposition. The new method is characterized by a cyclic process, which is composed of two parts: initially, selective SiGe epitaxy layer is grown on exposed bare silicon during a short incubation time by SiH$_4$/GeH$_4$/HCl/H$_2$system and followed etching step is achieved to remove the SiGe nuclei on oxide by HCl/H$_2$system without source gas flow. As a result, we noted that the addition of HCl serves not only to reduce the growth rate on bare Si, but also to suppress the nucleation on SiO$_2$. In addition, we confirmed that the incubation period is regenerated after etching step, so it is possible to grow thick SiGe epitaxial layer sustaining the selectivity. The effect of the addition of HCl and dopants incorporation was investigated.

• Korean Journal of Animal Reproduction
• /
• v.13 no.1
• /
• pp.18-25
• /
• 1989

This study was carried out to investigate the general semen characteristics of the Korean native goat and the effect of temperature, incubation time, dilution rate, freezing rate and glycerol concentration on motility and NAR (normal apical ridge) acrosome of fresh and frozen Korean native goat spermatozoa. 1. Average semen volume per ejaculate, motility, concentration and pH of fresh Korean native goat spermatozoa were 0.19${\pm}$0.09 ml, 94.5${\pm}$0.47%, 26.17${\times}$108${\pm}$1.68/ml and 6.63${\pm}$0.18, respectively. 2. Motility and NAR acrosome of fresh spermatozoa during incubation were higher at 22$^{\circ}C$ than at 5$^{\circ}C$ or 37$^{\circ}C$(P<.01). 3. Motility and NAR acrosome of spermatozoa diluted 1:4 during incubation were higher at 22$^{\circ}C$ than at 5$^{\circ}C$ or 37$^{\circ}C$(P<.01). 4. Motility and NAR acrosome of spermatozoa during incubation were higher for samples diluted 1:1, 1:2, or 1:4 than for samples diluted 1:6(P<.01). 5. Motility and NAR acrosome of post-thaw spermatozoa were higher at freezing rate of 12$^{\circ}C$/min than at freezing rate of 1$^{\circ}C$/min or 24$^{\circ}C$/min when glycerol concentration was 9%(P<.01).

• Fisheries and Aquatic Sciences
• /
• v.21 no.9
• /
• pp.23.1-23.8
• /
• 2018

Background: Russian sturgeon (Acipenser gueldenstaedtii) is an emerging candidate species in the Korean aquaculture domain owing to its highly valued caviar. Although the embryonic development of this species was previously described, the complete image data on the morphological differentiation of developing embryos have not been yet fully available. Further, with the viewpoint of larval production in hatchery, the effects of temperature on embryonic viability and the temporal window of hatching event have not been extensively studied. Hence, the objective of this study was to provide a complete set of photographic image data on the embryogenesis and also to examine the effects of incubation temperatures on embryonic viability and hatching event in farm-bred Russian sturgeon. Results: Typical characteristics of embryonic development including uneven, holoblastic cleavages with unequal blastomeres, followed by the formation of germ layer, neurulation, and organogenesis until hatching, were documented. Under different temperature conditions (12, 16, or $20^{\circ}C$), viability of embryos incubated at $12^{\circ}C$ was significantly lower as relative to those of 16 and $20^{\circ}C$ incubated embryos. Hatchability of embryos was higher, and the timing of hatching event was more synchronized at $20^{\circ}C$ than at 12 and $16^{\circ}C$. Conclusion: Data from this study suggest that the incubation of Russian sturgeon embryos at $20^{\circ}C$ would be desirable in the hatchery practice with respect to the good hatchability of embryos and the synchronization of hatching events. Additionally, the updated image data for complete embryonic development could be a useful reference guide for not only developmental researches but also artificial propagation of Russian sturgeon in farms.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1936-1943
• /
• 2015

The present study developed an efficient and environmentally friendly method for recovering polyhydroxybutyrate (PHB) from Cupriavidus necator. Several non-halogenated solvents were tested and it was found that butyl acetate and ethyl acetate are powerful solvents for the biopolymer. Testing was performed to examine the effects of temperature (25℃ until temperature below solvent boiling points) and heating incubation time (0-60 min) on the two solvents. Butyl acetate had a higher recovery level (96%) and product purity (up to 99%) than ethyl acetate at 103℃ and a heating incubation time of 30 min. Under these conditions, PHB recorded the highest molecular weight of 1.4 × 10⁶ compared with the standard procedure (i.e., recovery using chloroform). The proposed strategy showed that butyl acetate is a good alternative to halogenated solvents such as chloroform for recovery of PHB.

• Korean Journal of Microbiology
• /
• v.39 no.3
• /
• pp.197-200
• /
• 2003

In order to establish effective in situ PCR on the glass slide using the conventional DNA thermal cycler, several parameters should be considered. These include full accessibility of PCR reagents into the cells, prevention of diffusing PCR products out of the cells, loss of PCR reagents by nonspecific adherence onto the glass slide, dryness of PCR reagents by heat, and heat conductivity from the heat block to the glass slide. Especially, to guarantee the full accessibility of PCR reagents to sample, relatively higher concentration of PCR reagents (particularly 4.5 mM of $Mg^{++}$) was required while 5 to 10 units/50 ${\mu}l$ reaction of Taq enzyme was enough as long as the step of pre-PCR incubation was included. Dryness of sample was prevented by addition of distilled water into the empty slots in the heat block, thereby providing the reproducible temperature-time profile of PCR. Observed temperature was lower than the programmed temperature by 3 to $4^{\circ}C$.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.4
• /
• pp.491-496
• /
• 1997

To increase the productivity of microbial chitosan from Rhizopus oligosporus ATCC22959, production medium and incubation conditions were optimized. The composition of the medium and the incubation conditions were like follows : starch+glucose(1:1) 3.0%, yeast extract 3.0%, KH2PO4 0.05%, MgSO4 0.01%, ZnSO4 0.002%, pH 5.0, incubation temperature 3$0^{\circ}C$, and incubation time 96hours. The productivity of chitosan of optimized medium was about 6.4 times higher than that of basal medium.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.278-282
• /
• 2001

The recombination motion of Partial dislocations on basal slip (0001) 1/3<1120> in sapphire ($\alpha$-Al$_2$$O_3$) single crystals was investigated using the four-point bending test with the prism plane (1120) samples. These bending experiments were carried but in the temperature range from $1200^{\circ}C$ to $1400^{\circ}C$ at various engineering stresses 90MPa, 120MPa, and 150MPa. During these tests it was shown that an incubation time was needed for basal slip to be activated. The activation energy for the incubation time was 5.6-6.0eV in the temperature range from $1200^{\circ}C$ to $1400^{\circ}C$. The incubation time is believed to be related to recombination of climb dissociated partial dislocations via self-climb. In addition, these activation energies are nearly same as those for oxygen self-diffusion in $Al_2$$O_3$ (approximately 6.3 eV). Thus, the recombination of the two partial dislocations would be possibly controlled by oxygen diffusion on the stacking fault between the partials.

• Archives of Pharmacal Research
• /
• v.27 no.1
• /
• pp.61-67
• /
• 2004

When ginseng water extract was incubated at $60^{\circ}C$ in acidic conditions, its protopanaxadiol ginsenosides were transformed to ginsenoside $Rg_3$ and ${\Delta}^{20}$-ginsenoside $Rg_3$. However, protopanaxadiol glycoside ginsenosides $Rb_1, Rb_2$ and Rc isolated from ginseng were mostly not transformed to ginsenoside $Rg_3$ by the incubation in neutral condition. The transformation of these ginsenosides to ginsenoside $Rg_3$ and ${\Delta}^{20}$-ginsenoside $Rg_3$ was increased by increasing incubation temperature and time in acidic condition: the optimal incubation time and temperature for this transformation was 5 h and $60^{\circ}C$ resepectively. The transformed ginsenoside $Rg_3$ and ${\Delta}^{20}$-ginsenoside $Rg_3$ were metabolized to ginsenoside $Rh_2$ and $\Delta^{20}$--ginsenoside $Rh_2$, respectively, by human fecal microflora. Among the bacteria isolated from human fecal microflora, Bacteroides sp., and Bifidobacterium sp. and Fusobacterium sp. potently transformed ginsenoside $Rg_3$ to ginsenoside $Rh_2$. Acid-treated ginseng (AG) extract, fermented AG extract, ginsenoside $Rh_2$ and protopanaxadiol showed potent cytotoxicity against tumor cell lines. AG extract, fermented AG extract and protopanaxadiol potently inhibited the growth of Helicobacter pylori.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.329-336
• /
• 2007

This study was designed to find the optimum conditions for converting isoflavone glycoside to aglycone by ${\beta}-galactosidase$. Three different forms of the enzyme were tested and the optimum enzyme concentration, incubation temperature, pH, and incubation time were determined. Before treatment with enzyme, isoflavone contained 89.4% glycoside including daidzin, glycitin and genistin, and only 10.6% aglycone including daidzein, glycitein and genistein. Among the enzymes tested, the highest rate of isoflavone hydrolysis to aglycone, 35%, was observed when 3 unit/g Fungal Lactase (Amano Enzyme) was used. Higher incubation temperatures resulted in a higher rate of hydrolysis along with a greater loss of isoflavone mass. Therefore, body temperature $(37^{\circ}C)$ may be adequate for isoflavone conversion, with 44.9% hydrolysis and less than 10% loss of mass. As expected, a higher amount of aglycone was produced at pH 7 compared with other pH values. During 5hr of incubation, the conversion of glycoside to aglycone increased dramatically from 0 to 1hr, and plateaued thereafter. In addition, commercial soy-based milk was hydrolyzed more effectively with ${\beta}-galactosidase$ when incubated for 5hr. Based on the above results, the optimum conditions for isoflavone hydrolysis by ${\beta}-galactosidase$ were for 3 hr at $37^{\circ}C$, pH 7 with 3 unit/g Fungal Lactase (Amano Lactase), yielding an average total amount of aglycone ranging from 40 to 47%.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.297-302
• /
• 2013

Cryopreservation of epididymal spermatozoa offers a potential tool for rescuing genetic material from males of genetically elite populations. Castration, catastrophic injury, sudden death or any other event that makes semen collection or mating impossible may prematurely terminate a stallion reproduction. Stallion epididymal spermatozoa vary widely in the loss of progressive motility, acrosomal integrity, and viability during freezing and thawing. The objective of this work was to investigate the effect of (1) freezing package types on cryopreservation efficiency, (2) thawing temperatures (37, 56 or $70^{\circ}C$) on Computer Assisted Sperm Analysis (CASA) parameters and (3) post-thawing incubation time (0, 1, 2 or 4h) on castrated stallion epididymis. Post-thawed sperm motility ranged between 59.69% and 64.28% ($56^{\circ}C$ and $37^{\circ}C$) in various thawing temperatures. When stallion epididymis sperm was frozen, straw was better than freezing tube on VCL (Velocity of Curvilinear Line) and VAP (Velocity of Average Path) parameter. Higher percentage of motility was observed at $37^{\circ}C$ thawing temperature even though no significant difference was observed among various temperatures. The motility, VCL, ALH (Amplitude of Lateral Head displacement), VAP, BCF (Beat-Cross Frequency) and STR (Straightness index) parameter of post-thawed sperm were significantly decreased by increasing the incubation time for all thawing temperatures. The present study showed that type of freezing package (Straw vs. Freezing tube) was not significantly different on cryopreservation efficiency. Furthermore, stallion epididymal spermatozoa frozen-thawed at $37^{\circ}C$ for 1 min resulted the highest proportion of motility and velocity movement. In addition, motility and viability of frozen-thawed stallion epididymal spermatozoa were also decreased by incubation.