• Steel and Composite Structures
• /
• 제50권4호
• /
• pp.429-441
• /
• 2024

This paper studies the free vibration behavior of trapezoidal shaped coupled double-layered graphene sheets (DLGS) system using first-order shear deformation theory (FSDT) and incorporating nonlocal elasticity theory. Two nanoplates are assumed to be bonded by an interlayer van der walls force and surrounded by an external kelvin-voight viscoelastic medium. The governing equations together with related boundary condition are discretized using a mapping-differential quadrature method (DQM) in the spatial domain. Then the natural frequency of the system is obtained by solving the eigen value matrix equation. The validity of the current study is evaluated by comparing its numerical results with those available in the literature and then a parametric study is thoroughly performed, concentrating on the series effects of angles and aspect ratio of GS, viscoelastic medium, and nonlocal parameter. The model is used to study the vibration of DLGS for two typical deformation modes, the in-phase and out-of-phase vibrations, which are investigated. Numerical results indicate that due to Increasing the damping parameter of the viscoelastic medium has reduced the frequency of both modes and this medium has been able to overdamped the oscillations and by increasing stiffness parameters both in-phase and out-of-phase vibration frequencies increased.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.134-137
• /
• 2008

The effects of residual stress and surface defects on the mechanical properties of the high carbon steel filament used for the automotive tire have been experimentally investigated. The samples were fabricated with annealing temperature. The residual stress was measured by focused ion beam and strain mapping software which has advantages, such as data with high accuracy and fast data acquisition time. Mechanical properties, such as tensile strength and fatigue resistance, were gradually increased up to $200^{\circ}C$ and then slightly decreased. From the measurement of residual stress and level of surface defect, it was revealed that the critical factor was varied with different temperature region. That is, the fatigue resistance increased due to decreasing the residual stress and decreased due to increasing the size and distribution of surface defect.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.233-239
• /
• 2016

Color enhancement basically deals with color manipulation in digital images. Recently, the technique has become widely used as a result of the increasing use of digital cameras. Retinex-based colorenhancement algorithms are a popular technique. In this paper, retinex with bilateral filtering is proposed to improve the quality of poorly illuminated images. Generally, it consists of three main steps: first, a retinex-based algorithm with color restoration; second, transformation mapping using histogram matching; and finally, smoothing the image using a bilateral filter. The experimental results demonstrate that the proposed method can successfully enhance image contrast while avoiding the halo effect and maintaining the color distribution in the image.

• 한국측량학회지
• /
• 제35권1호
• /
• pp.63-71
• /
• 2017

Recently, there has been growing interest in public participation GIS (Geographic Information System) technology that enables spontaneous public response to increasingly frequent flood and drought events. Accordingly, social and economic demands are increasing on portal services that are designed to help cope with natural hazards such as earthquakes. By focusing on a specific hazard, urban flood, this study designed a prototype of a disaster response portal and its service system. The community map developed in this study is focused on prevention and mitigation of the urban flood damage by analyzing the vulnerable areas, and providing effective means to inspect the roads and sewer systems. By considering the compatibility with VGI (Volunteered Geographic Information) portals, the study created a system environment by employing universally used open-source software programs such as Apache Tomcat, GeoServer, GeoNetwork, and PostgreSQL/PostGIS.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.141-146
• /
• 2017

We investigated configuration of metallic and insulating domains in $VO_2$ thin films, while spanning metal-insulator phase transition. Kelvin probe force microscopy, of which spatial resolution is less than 100 nm, enables us to measure local work function (WF) at the sample surface. The WF of $VO_2$ thin films decreased (increased) as increasing (decreasing) the sample temperature, during the phase transition. The higher and lower WF regions corresponded to the insulating and metallic domains, respectively. The metallic fraction, estimated from the WF maps, well explained the temperature-dependent resistivity based on the percolation model. The WF mapping also showed us how the structural defects affected the phase transition behaviors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.344-346
• /
• 2006

In this paper, a novel algorithm for increasing the steady state efficiency during light load operation of the induction generator that integrated with a wind power generation system is presented. The proposed algorithm based on the flux level reduction, where the flux level is estimated using Support-Vector -Machines for regression (SVR) for the optimum d-axis current of the generator. SVR is trained off-line to estimate the unknown mapping between the system's inputs and outputs, and then is used online to calculate the optimum d-axis current for minimizing generator loss. The experimental results show that SVR can define the flux-power loss accurately and determine the optimum d-axis current value precisely. The loss minimization process is more effective at low wind speed and the percent of power saving can approach to 40%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.426-431
• /
• 2001

When we use various multimedia programs such as 3D-game, visual conference, dial-pad phone by internet service, we make use of headset generally. As internet system is magnified more and more, a demand of headset will be increasing continuously. Because microphone was fixed by headset, it has many inconveniences for using headset. For these reasons, new concept headset is needed nowadays. Main idea of development of headset is very the automatic operation system of microphone. There are many process variables in appling new technology to the conventional headset. They can be solved by using axiomatic approach method which is very useful design method for designing new products. Its main character is scientific and analytical. The goal of this research is to design and manufacture a new headset model with axiomatic design method. In this paper, a new concept headset was presented by mapping the relation between functional requirements and design parameters.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.235-241
• /
• 2006

The demand of 3D terrain mapping techniques is increasing in many application fields such as CNS(Car Navigation System), web service system, DMB(Digital Multimedia Broadcasting) systems and etc To construct a 3D terrain map, it is a pre-requite step that register data collected from different surveying sources. This Paper Present the methodology to register airborne photo, LIDAR data, and digital map, which are major data sources to create a 3D terrain mao. For this purpose, we developed the generally applicable algorithm that uses linear features to register airborne photos and digital maps to LIDAR data. The algorithm explicitly formulates step-by-step methodologies to establish observation equations for transformation. The results clearly demonstrate the proposed algorithm is appropriate to register these data sources.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권7호
• /
• pp.3307-3321
• /
• 2018

With the ever-increasing queries related to temporal (or time-related) information, such as the product launching time, in search engine, most web pages will be augmented with such information in the future. Meanwhile, the gradual emergence of the use of electronic textbooks (or e-Textbooks), which enrich the traditional paper-based textbooks with multimedia contents such as interactive quizzes and multimedia-based simulations, has led us to infer that e-Textbooks will be blended with temporal information to support learning. The use of temporal information helps teachers and students to understand the level of prior knowledge required to study a topic, as well as the sequence of learning activities and related sub-topics, that best attains the educational goals. This paper presents a simple yet efficient tool called TimeMap, which is based on mind mapping, to create an e-Textbook called TimeBook that takes account of time-related curriculum and the ability of students to learn via collaboration.

• 한국측량학회지
• /
• 제16권2호
• /
• pp.327-335
• /
• 1998

여러 가지의 지도투영법이 사용되고 있지만 지구를 왜곡 없이 평면으로 나타낼 수 있는 방법은 없다. 이러한 투영에 따른 왜곡을 극복하고 좌표계에 의한 지형에 대한 수치정보를 연속적으로 표현하기 위하여 본 논문에서 한반도 지역에 대한 지도 정확성과 투영특성 및 최적의 방법모색, 왜곡오차의 원인, 위치변위 및 정도 향상 등에 대한 것을 연구하였다.