• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.395-399
• /
• 2002

영국의 이동통신시장은 2001년 8월 성인의 73%가 이동전화를 소유하고 있을 만큼 성장하였고, Vodafone, BTCellnet, One2One, Orange 등 4개 사에 의해 균형적인 경쟁이 전개되고 있다. 본 고에서는 영국에서 이동전화 사업자간 균형발전을 가져오고, 경쟁이 활성화된 배경을 정리하고 있다. 국내의 경우에 후발사업자와 선발사업자간 시장점유율 격차가 지속적으로 확대되고 있고, M&A에 의해 이용자의 사업자 선택권이 축소되고 있는 상황에서 영국 사례를 중심으로 경쟁이 활성화되기 위한 시사점을 살펴보고 있다.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.555-559
• /
• 2008

순방향 전압-온도 (forward voltage-temperature)법을 이용하여 양자점 레이저 다이오드의 접합온도를 측정하였다. 식각 깊이가 깊은 mesa 구조의 경우 입력전류에 대한 접합온도의 증가율은 0.05 K/mA인 반면, 식각 깊이가 낮은 mesa 구조의 경우 0.07 K/mA로서 상대적으로 높게 측정되었다. 깊은 mesa 구조에서의 상대적으로 낮은 접합온도 증가율은 mesa 측면 방향으로의 열확산 효과 때문인 것으로 설명된다.

• 한국표면공학회지
• /
• 제20권4호
• /
• pp.144-153
• /
• 1987

In the case of dipping the Ni-Resist cast iron into molten aluminum with iron content, the thickness of intermetallic compound was remarkably increased with increasing iron content. The thickness was shown by following equation in the range of 1-3% iron content; $x=22.5t^{1/2}+4.47{\cdot}t{\cdot}(Fe%)$. where, x is thickness(${\mu}m$), t the time (minute), Fe% the iron w/o. When the Ni-Resist cast iron was dipped into the molten aluminum containing zinc content, the intermetallic compound thickness was also increased with increasing zinc contents. And thickness was represented by the following equation in the range of 2-10% zinc content; $x=3.46t^{1/2}+0.27{\cdot}t{\cdot}(Zn%)$. However, in the case of dipping the Ni-resist cast iron into molten aluminum with silicon content, the thickness of intermetallic compound was decreased with increasing silicon content, as shown in the following equation; $x=7.17t^{1/2}-0.15{\cdot}t{\cdot}(Si%)$. The intermetallic compound formed onto Ni-Resist cast iron was identified to be $FeAl_3\;and\;Fe_3Al$. As the result of hardness measurement, the peak hardness appeared in the intermetallic compound at near interface of the cast iron and the compound.

• 지식경영연구
• /
• 제20권3호
• /
• pp.17-38
• /
• 2019

Rrecently, companies have made great efforts to satisfy various needs and heightened expectations of customers, and the importance of customer center as customer contact department for customer relationship management is increasing. In the knowledge ecosystem, corporate customer centers are emerging as a new alternative to acquiring corporate competitiveness by increasing sales and increasing market share by improving marketing support activities and customer relationship management at customer contact points. As a result, the interest in the customer center has increased rapidly because it provides the opportunity to contact with the customer. In addition, in the era of the fourth industrial revolution, the customer center, which is a collection of information and communication technologies, has a big databased voice recognition technology to elaborate customer service, thereby enhancing customer satisfaction and contributing to marketing through continuous interaction with customers. Of course, we have the opportunity to transform into the frontline business intelligence front for customer knowledge. This study is a comparative case study on how the customer center of K Life Insurance that takes the lead in the customer center industry has successfully renewed and established their key information systems to improve customer services and reinforce marketing support competencies. Based on the above, this study will present factors affecting successful implementation and settlement of the customer service information systems of customer centers by independently analyzing two individual cases.

• Elastomers and Composites
• /
• 제34권3호
• /
• pp.199-211
• /
• 1999

본 연구에서는 PVC졸 실란트에 요구되는 접착성 개선제에 대한 연구의 일환으로 에폭시가 2개(epoxy A)인 것과 4개인 것(epoxy B)을 각각 첨가하였을 때 PVC졸 실란트의 제반물성에 미치는 영향을 연구하였다. PVC졸은 디옥틸프탈레이트(DOP)로 PVC를 가소화시켜 제조된 것이다. 에폭시 수지 A의 경우는 에폭시 수지 함량이 증가할수록 PVC졸 실란트의 점도가 감소하였고, 첨가제 $CaCO_3$가 첨가된 에폭시 PVC졸 실란트의 점도는 에폭시 수지 종류에 관계없이 $CaCO_3$ 함량이 증가할수록 점도가 증가했다. $45^{\circ}C$ 열 수조상에서 점도 변화는 에폭시 수지 종류 또는 함량에 관계없이 점도가 감소하였는데 이는 에폭시가 PVC졸 실란트에 안정제의 역할을 한 것으로 판단되었고, $CaCO_3$가 함유된 경우는 그 함량이 증가할수록 점도가 증가한 것은 충진효과로 판단되었다. 에폭시가 첨가된 PVC졸 실란트의 열적 안정성은 다소 개선되었다. 인장 강도는 에폭시 수지 A의 함량이 낮은 경우는 인장 강도 및 신율이 증가하고, 높은 함량에서는 오히려 감소했다. 에폭시 수지 B의 경우는 에폭시 함량이 증가할수록 인장 강도와 신율은 증가하는 현상이 보였다. 충진제 함량이 많을수록 충진제 함량이 적은 PVC졸보다도 인장 강도는 낮은 현상을 보였다. 전기적 특성에서는 tan ${\delta}$의 값이 0.1정도($0.1{\pm}0.04$)이고 비유전율 ${\epsilon}_r$ 값은 0.5정도($0.5{\pm}0.04$)이므로 좋은 절연체로 판단되었다.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1817-1822
• /
• 2011

The fault current has been increasing due to expansive substation facilities for meeting the increase of demand. To limit increasing fault current in a power system, among methods the superconducting fault current limiter (SFCL) has been considered to be adopted in the power grid. However, in case of adopting SFCL in the power system, most of SFCLs need to solve problems such as recovery, cost. With efforts to solve those problems, the novel fault current limiting device which is called hybrid SFCL is developed. To apply the hybrid SFCL, it has to be needed to analyze application possibility and itself operation characteristics. In this paper, the fault current limiting and operation characteristics of hybrid SFCL with first half cycle the limiting operation in case of various resistances of superconducting element were analyzed through experiment.

• 한국진공학회지
• /
• 제5권2호
• /
• pp.119-126
• /
• 1996

The effect of the $O_2$ concentration in the sputtering gas mixture, substate temperature and Ar pressure on the structural and optical properties of 3 mol% YSZ and 8 mol% YSZ thin films deposited by RF magnetron sputtering were investigated . The films were observed to have various crystal structures with different compositions in accordance with the type of the target materials. The size of fine grain-like particles decreased wiht increasing the $O_2$ concentration in the sputtering gas in the case of 3mol% YSZ, while it increased in the case of 8 mol% YSZ . However, the average opticla transmission of 8mol% YSZ, despite of thicker thickness. was higher than that of 3 mol% YSZ. Furthermore, the values of refractive index of 3mol% YSZ increased with increasing the $O_2$ concentration in the sputtering gas on the contrary to those of the 8 mol% YSZ. However, the transmission spectra of 8 mol% YSZ films were not strongly influenced by the substrate temperature and Ar pressure, whereas the refractive index of the YSZ films were strongly affected by the sputtering parameters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.28-28
• /
• 2010

The higher the short circuit currents, the faster the interruption takes place. For increasing the interrupting performance of the MCCB, it is important to design optimally the adjustable tripping device, the open /shut mechanism, and the arc quenching room in the MCCB. This paper is focused on understanding the interrupting performance, more specifically of the grid and the fix contact, based on the shape of the arc quenching room in the current MCCB.

• 동력기계공학회지
• /
• 제15권6호
• /
• pp.53-58
• /
• 2011

To optimization of mlod for fineblanking forming of sector gear of recliner, it was analyzed the effect of clearance, V-ring height, V-ring position, blank holding force and counter punch force. In case of 0.003 mm of clearancs, the finest shear plane was obtained, but optimization between die and punch clearance was 0.005 mm. The height of V-ring was 0.7 mm. In case of increasing of hold force, the size of shear plane got better and the decrement of thickness became smaller. Both the size of shear plane and the decrement of thickness increased according to increasing of counter punch force.

• Journal of Information Technology Applications and Management
• /
• 제11권3호
• /
• pp.77-87
• /
• 2004

The importance of information systems(IS) operations and maintenance is increasing as the costs of IS operations and maintenance take larger share of total IS costs and organization's dependency on IS is increasing. However, this area has received relatively little attention from scholars and practitioners despite of its significance. The main objectives of this study are to provide practical guidelines for improving IS operations and maintenance practices, and to propose a research framework for this area. To accomplish this objectives, the following three issues are investigated. First, IS operations and maintenance practices of a case company are analyzed. Second, the current practices are compared with best practices. Finally, suggestions are made based on the analyses to improve the IS operations and maintenance practices.