• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.281-290
• /
• 2012

Hydrodynamic analysis of a surface-piercing body with an open chamber was performed with incident regular waves and forced-heaving body motions. The floating body was simulated in the time domain using a 2D fully nonlinear numerical wave tank (NWT) technique based on potential theory. This paper focuses on the hydrodynamic behavior of the free surfaces inside the chamber for various input conditions, including a two-input system: both incident wave profiles and forced body velocities were implemented in order to calculate the maximum surface elevations for the respective inputs and evaluate their interactions. An appropriate equivalent linear or quadratic viscous damping coefficient, which was selected from experimental data, was employed on the free surface boundary inside the chamber to account for the viscous energy loss on the system. Then a comprehensive parametric study was performed to investigate the nonlinear behavior of the wave-body interaction.

• Water for future
• /
• v.20 no.1
• /
• pp.49-54
• /
• 1987

A numerical analysis of the characteristics of wave reflection over rippled beds (sand bars) was carried out By Boundary Element Method(B.E.M) using linear elements. It is assumed that the incident wave is normal and oblique to the rippled beds and the wave may be and the escribed by two-dimensional linear theory. The accuracy of the computational scheme is investigated by comparing the laboratory data, the analytic measured results of the other researchers. The B.E.M results for the normal incident wave is held for the mechanism of the resonant Bragg reflection at the point where the wave length of the bottom undulation is one half the wave length of the surface wave.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.726-730
• /
• 2000

In this article, the scattering effect around a microphone is studied by using boundary element method, because it is hard to find the scattering experimentally. The scattering problem is defined by impinging an obstacle, i.e. a solid cylinder, with an incident plane wave. From this analysis, the scattering is numerically calculated by varying the microphone shape, the incident angle and the distance between microphones. It is found that the scattering effect of a microphone increases as the frequency increases and is not considerable in the low frequency region. However, it is noted that there might be the pressure distortion above 4 kHz due to the scattering in microphone measurement.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.4
• /
• pp.270-279
• /
• 2022

In this study, numerical analysis and experiments were performed to analyze the viscous damping effect according to the shape of the chamber skirt of the breakwater-linked inclined oscillating water column wave energy converter. Experiments were conducted using a two-dimensional mini wave tank and verified by comparing the results of a computational fluid dynamics numerical analysis. Pointed and rounded skirts were modeled to compare the effect of viscous damping when incident waves enter the chamber, and the difference in the displacement of the water surface in the chamber was compared according to the wave period for the two skirt shapes. The wave elevation in the chamber in the rounded-skirt condition was larger than the pointed-skirt condition in all wave periods, which was approximately 47% greater at 0.9 s of the incident wave period. Therefore, extracting the maximum energy through the optimal orifice is possible while minimizing the energy attenuation in the rounded-skirt condition.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2000.11a
• /
• pp.119-124
• /
• 2000

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.165-166
• /
• 2008

• Structural Engineering and Mechanics
• /
• v.42 no.6
• /
• pp.815-829
• /
• 2012

This paper proposes a nonlinear computational modeling approach for the behaviors of structural systems subjected to fire. The proposed modeling approach consists of fire dynamics analysis, nonlinear transient-heat transfer analysis for predicting thermal distributions, and thermomechanical analysis for structural behaviors. For concretes, transient heat formulations are written considering temperature dependent heat conduction and specific heat capacity and included within the thermomechanical analyses. Also, temperature dependent stress-strain behaviors including compression hardening and tension softening effects are implemented within the analyses. The proposed modeling technique for transient heat and thermomechanical analyses is first validated with experimental data of reinforced concrete (RC) beams subjected to high temperatures, and then applied to a bridge model. The bridge model is generated to simulate the fire incident occurred by a gas truck on April 29, 2007 in Oakland California, USA. From the simulation, not only temperature distributions and deformations of the bridge can be found, but critical locations and time frame where collapse occurs can be predicted. The analytical results from the simulation are qualitatively compared with the real incident and show good agreements.

• Convergence Security Journal
• /
• v.6 no.4
• /
• pp.161-169
• /
• 2006

According to the development of information system, many information system and application soft-ware are develop. However, cyber attack and incident have more increased to the development of them. To defend from cyber attack and incident, many organizations has run information security systems, such as Intrusion Detection System, Firewall, VPN etc, and employed information Security person till now But they have many difficulty in operating these information security component because of the lack of organizational management and analysis of each role. In this paper, We propose the formal Cause-Effect Model related with the information security system and administrative mission per each security. In this model, we regard information system and information system operator as one information component. It is possible to compose the most suitable information component, such as information system, human resource etc., according to the analysis of Cause-Effect Model in this paper. These analysis and approaching methodology can make effective operation of each limited resource in organization and effective defense mechanism against many malicious cyber attack and incident.

• Journal of the Korean Society of Safety
• /
• v.36 no.5
• /
• pp.43-51
• /
• 2021

Incident investigation is one of the most important processes among various other safety management methods to prevent industrial accidents. Finding the root causes of accidents, eliminating hazards, and improving safety are the most important purposes of investigating accidents. During the investigation process, root cause analysis (RCA) techniques are used to effectively identify RCA. Over the past few decades, over 30 RCA methods have been developed. These techniques are being widely used in some industries, such as the nuclear and aircraft industries; however, most of the RCA techniques require professional knowledge and special training, making it difficult for safety managers in their respective fields to understand and apply them. Therefore, managers of general industrial sites are rarely present at the scene of actual accident investigations, and they cannot contribute much to the purpose and effectiveness of these investigations. In this study, to address these issues, we developed an RCA technique to facilitate root cause investigation of accidents in real-world industrial sites. To develop new techniques, Systematic Cause Analysis Technique (SCAT), one of the RCA techniques, was used to investigate incidents in the enterprise over three years. We also utilized feature analysis and other papers from existing RCA techniques. To verify its effectiveness, the technique proposed was also applied to the accident case. The technique developed can easily identify and analyze the root cause of an accident and help industrial managers. It can also identify the root cause category where accidents are concentrated and use this data to establish guidelines for preventing future accidents and, thus, focus on prioritizing improvement initiatives.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.229-234
• /
• 2004

A Typhoon wave is generated by wind fields during the Passage of Typhoon. Transporting wind field makes wind wave and swell in the open sea, and then, those wave components are transported in the shallow water. Typhoon waves in the shallow water is generated by Typhoon wind field and incident wave. Bisides, Incident waves to the shallow water are deformated by topographic conditions. This paper estimated the analysis of the Typhoon waves by wind fields and incident waves according to wave action balance equation model. As the result of wave numerical experiment, wave field during the passage of Typhoon 'Memi' in the shallow water is strongly effect by wind fields. Wave action balance equaion can be partially used for Typhoon wave simulations.