• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.57-62
• /
• 2003

The block assembly of ship consists of a certain type of heat processes such as cutting, bending, welding, residual stress relaxation and fairing. The residual deformation due to welding is inevitable at each assembly stage. The geometric inaccuracy caused by the welding deformation tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding deformation. The validity of the prediction method must be also clarified through experiments. This paper proposes a simplified analysis method to predict the welding deformation of panel block structure. For this purpose, a simple prediction model for fillet welding deformations has been derived based on numerical and experimental results through the regression analysis. On the basis of these results, the simplified analysis method has been applied to some examples to show its validity.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권1호
• /
• pp.29-36
• /
• 2002

It is required that the current state of system should be Precisely monitored for efficient and safe operation of the subway power system and it is an important Problem to secure the high quality data for state estimation. The current state of subway power system is estimated by using data transmitted to control center from every measuring instrument. The high accuracy and trust can be maintained if the measured data have a high quality. But it is difficult to estimate the accurate state of system because of the noises in transmitted data and the inaccuracy of measuring instruments. So the object is to reduce the difference between the real values and the measured values in order to improve considerably the inaccuracy due to Instrumental errors and transmission noises using the state estimation method. In this paper, we proposes a new state estimation to estimate the accurate state of the subway power system from the measured values of a Sang-In station in Daegu subway and consider the possibility of application to the real subway power system. on the basis of that. The simulation results show to make sure of the possibility to apply to the real system usefully.

• 전자공학회논문지
• /
• 제52권4호
• /
• pp.49-55
• /
• 2015

기존의 BSIM4 모델과 다이오드를 사용한 BSIM4 Macro 모델의 바이어스 종속 게이트-드레인 오버렙 캐패시턴스 $C_{gdo}$ 시뮬레이션의 부정확성에 대하여 자세히 분석하였다. 이러한 Macro 모델은 기존의 BSIM4 모델보다 더 정확하지만 선형영역에서 사용될 수 없음을 발견하였다. 기존 모델들의 부정확성을 제거하기 위해서 물리적인 바이어스 종속 $C_{gdo}$ 모델 방정식을 사용한 새로운 BSIM4 Macro 모델을 제안하였고 전체 바이어스 영역에서 유효함을 입증하였다.

• 아태비즈니스연구
• /
• 제14권1호
• /
• pp.231-246
• /
• 2023

Purpose - This study attempts to provide a new theoretical perspective on the quality signaling and its impact on a market under information asymmetry, focusing on how the accuracy and the cost of quality signaling affect sellers' and buyers' profit, suggesting appropriate designs of quality signaling methods which mitigates information asymmetry. Design/methodology/approach - In order to examine the effect of quality signaling on strategic interactions within the market, we establish an analytic model where market outcomes are determined by seller's quality claim and price, and buyers are risk-neutral. By investigating this analytic model through relevant game trees, we find the subgame perfect Nash equilibria of the market and predict related market outcomes based on sellers' quality signaling strategy. Findings - Our analytic model shows counterintuitive results that seller profit will be the lowest with inaccurate quality signaling and the highest with no quality signaling, mostly due to the certification cost. Consequently, sellers should proceed with caution if the quality signaling is less than accurate, as it may backfire. We believe that this is due to the fact that the inaccuracy of quality signaling causes some confusion and uncertainty in both sellers and buyers' decision to maximize profit, making it hard for sellers to predict buyers' behavior. Research implications or Originality - Although the sources and types of quality signaling errors have been investigated in the literature, there has not been satisfactory understanding regarding how inaccuracy of quality certification affects specific market outcomes. We expect that our theoretical model would provide important implications on how to utilize quality signaling to solve adverse selection issues in markets under information asymmetry.

• 대한인간공학회지
• /
• 제8권1호
• /
• pp.41-46
• /
• 1989

The purpose of this study is to improve robot motion control in teaching and operating the expert system/world coordinate system (TOES/WCS) constructed in the previous study. The major contribution of this study is reduction of the inaccuracy in coordinated reading and the movement time of robots in macro motion control. This study also reduces undesirable time of micro motion control by using an unit control (UC) and a micro unit control (MUC) in micro motion control.

• 대한음성학회지:말소리
• /
• 제44호
• /
• pp.131-143
• /
• 2002

Music query by humming is a challenging problem since the humming signal inevitably contains much variation and inaccuracy. In this paper, we suggest an algorithm for querying a wanted song from music database by humming its melody. In order to suit or adapt the inaccurate peoples humming, a new melody representation technique is proposed. Our algorithm is basically a pitch and duration information-based one and performs fairly well. 85% of correct query rate of the song is achieved for the top 3 matches when tested with 20 songs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.288-289
• /
• 2006

Conventional AGC controller implemented by considering ACE and bias factors always contains error terms due to inaccuracy of bias factors. To improve this steady state AGC performance, PI controller can be introduced to the ACE processing and plant controller part. Even though more rigorous inspections are required, a simple application shows that it can be very useful for the improvements of AGC performances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.638-641
• /
• 1992

In this paper, a hybrid position/force control scheme is proposed. The control scheme modifies the position command for force control against constraint surface of environment and is very simply designed and implemented. The merits of the control scheme are that it can cope with change of constraint conditions and small position inaccuracy of the environment. A constraint surface position observer is also proposed to reduce disturbances on controlled force.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.13-17
• /
• 1990

In this paper we propose the force controller using a neural network for a redundant manipulator. Jacobian transpose matrix of a redundant manipulator constructed by a neural network is trained by using a feedback torque as an error signal. If the neural network is sufficiently trained well, the kinematic inaccuracy of a manipulator is automatically compensated. The effectiveness of the proposed controller is demonstrated by computer simulation using a three-link planar robot.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 봄 학술발표논문집 Vol.28 No.1 (A)
• /
• pp.76-78
• /
• 2001

Secure Lambda calculus(SLam)는 정보 보안을 보장해주는 언어이나, Continuation Passing Style(CPS) 변환 후에는 안전성 분석의 정확도가 떨어진다. CPS의 논리적인 성질(ordered linearity)을 반영하여 변환 후에도 정확도가 떨어지지 않는 타입 시스템을 고안하고 무간섭성을 증명하였다. 함수형 SLam 언어에서 정확도가 떨어지는 경우는 앞으로 계산할 값의 인자가 쓰이지 않는 경우임을 밝혀내었다.