• 제목/요약/키워드: in-situ joint

검색결과 104건 처리시간 0.027초

3차원 수치해석을 이용한 연약대 방향에 따른 터널 거동 특성 평가 (Assessment of Tunnel Displacement with Weak Zone Orientation using 3-D Numerical Analysis)

  • 임성빈;정해근;서용석
    • 지질공학
    • /
    • 제19권1호
    • /
    • pp.43-50
    • /
    • 2009
  • 터널 굴착 중 지반에 존재하는 연약대의 방향 특성에 따른 거동 및 응력 분포 특성을 3차원 수치해석을 이용하여 정량적으로 평가하였다. 수치모델에서 연약대의 방향은 RMR의 취약 불연속면에 대한 보정인자를 기준으로 설정되었으며, 위치는 각 방향 조건에 대하여 연약대가 천단부 상부 1D, 천단부, 막장 중앙부를 지나는 경우로 설정되었다. 지반정수는 현장 계측변위를 기반으로 하는 역해석을 통해 산정하였다. 최종적으로 터널 천단부에서 발생하는 변위의 크기를 기반으로 연약대 방향 및 위치 조건에 따른 영향도를 평가하여 5등급으로 분류하였다.

암반공학시스템과 수치해석을 이용한 저심도 암반터널에서의 붕락 발생 가능성 평가 (Evaluation of Cave-in Possibility of a Shallow Depth Rock Tunnel by Rock Engineering Systems and Uumerical Analyses)

  • 김만광;유영일;송재준
    • 터널과지하공간
    • /
    • 제19권3호
    • /
    • pp.236-247
    • /
    • 2009
  • 도심지에서의 인구 및 시설물 과밀화 현상으로 인해 지하 공간의 효율적 활용 문제가 대두되고 있으며, 이에 대한 해결책으로 저심도 지하공간의 개발이 증가되고 있다. 그러나 저심도 터널 굴착시 예상치 못한 붕락 문제도 함께 증가하고 있으므로, 터널 붕락으로 인한 인명과 재산의 피해를 줄이기 위해서는 굴착 개시전에 암반거동 유형을 파악하고 분류하는 것이 필요하다. 특히 붕락(cave-in)의 경우 낙반이나 소성변형보다 발생규모가 크고 빠르게 일어나는 특징이 있으므로 이에 대한 대비책이 마련되어야 한다. 본 연구에서는 7가지의 매개변수-일축압축강도, 암질지수, 절리면 상태, 응력 상태, 지하수, 지진 및 진동, 터널 폭을 이용하여 붕락 거동 유형을 파악하고자 하였다. 이러한 매개변수로부터 붕락 거동을 예측하기 위해서는 현장 사례로부터 충분한 자료를 확보하여야하나 현장자료의 부족 등의 현실적인 한계를 고려하여 7가지 매개변수들간의 상호영향성과 가중치를 산정하기위해 전문가 집단의 의견과 암반공학시스템의 원리를 이용하였다. 그 결과로 저심도 암반터널에서의 붕락 거동 지수를 서울 지하철 9호선 000구간에 적용하였다. 한편 288가지 경우의 불연속체 해석을 통해 붕락 발생 유무를 확인하였고 이를 붕락 거동 지수와 비교하였다. 또한 로지스틱 회귀분석을 통해 도출된 회귀식으로 지보패턴별 파괴확률을 산출하였고 이를 붕락 거동 지수와 비교하였다.

수리적 간극변화를 고려한 수리적 굴착손상영역의 정의에 관한 연구 (Defining the hydraulic excavation damaged zone considering hydraulic aperture change)

  • 박종성;류창하;이정인;류동우
    • 한국터널지하공간학회 논문집
    • /
    • 제9권2호
    • /
    • pp.133-141
    • /
    • 2007
  • 굴착손상영역(EDZ)은 굴착으로 인해 현지 암반이 역학적으로 손상을 입게 되어 응력상태, 변위상태, 암반의 안정성, 지하수의 흐름상태 등에 변화가 일어나는 영역을 의미한다. EDZ의 역학적 특성과 관련한 많은 연구들이 수행되었지만, EDZ에서의 지하수 유동 특성에 관한 연구는 아직 부족한 수준이다. 따라서 본 연구에서는 굴착으로 인해 굴착면 주변의 수리적 간극이 늘어나는 영역을 산정하여 '수리적 굴착손상영역'이라 정의하고 이를 위해 수리-역학적 상호작용(coupling)해석을 수행하였다. 이는 개별 불연속면 망의 생성을 통한 역학적, 수리적 변화의 모사가 가능한 개별요소법(discrete element method; DEM)을 이용하여 수행하였다. 이를 통해 EDZ에서 지하수의 흐름에 영향을 미치는 각종 조건들(불연속면의 간극, 불연속면 군의 방향, 불연속면 군의 길이, 불연속면의 각도 등)의 변화와, 응력분포, 지하수의 유동 등으로 인해 수리적 간극 값이 어떻게 변화하는지를 파악하였다. 이 결과를 토대로 수리적 간극이 커지는 영역, 수리적 EDZ를 공동 주변의 불연속면 방향에 수직 방향으로 존재하는 타원형의 형태로 모델링 하였다.

  • PDF

경주 남산 삼릉계곡 선각육존불의 훼손도 평가와 표면 강화처리제 적용 효과 (Deterioration Assessment and Consolidation Effect of Ethylsilicate Consolidants for Samneunggyeseongakyukjonbul(Rock-carved Yukjonbul Buddha in Samneung Valley) in Namsan, Gyeongju)

  • 김재환;이명성;이재만;조성남;김지영;이찬희
    • 암석학회지
    • /
    • 제21권4호
    • /
    • pp.405-413
    • /
    • 2012
  • 이 연구는 경주 남산 삼릉계곡 선각육존불의 재질 및 풍화특성을 고려한 강화제의 처리방안을 도출한 것이다. 선각육존불은 알칼리장석화강암으로 구성되어 있으며 절리를 따라 표면에 박리박락과 입상분해가 진행되어 보존처리가 시급하다. 알칼리장석 화강암을 대상으로 강화처리 실내실험과 현장실험을 실시한 결과 풍화도가 높은 암석은 에칠실리케이트의 함량이 높은 OH 100과 KSE 300에서 강화효과가 큰 것으로 나타났다. 또한 처리 후 동결 및 염풍화에 대한 내구성은 OH 100이 우수하였다. 현장적용 결과에서 KSE 300에 의한 처리가 뚜렷한 물성증가를 보이고, 선각육존불에서 염풍화가 확인되지 않으므로 KSE 300에 의한 강화처리가 가장 우수한 강화효과를 나타내는데 적합한 처리제로 판단된다.

방사선환경에서 ACP 주요부품의 신뢰도 평가 (Reliability Evaluation of ACP Component under a Radiation Environment)

  • 이효직;윤광호;임광묵;박병석;윤지섭
    • 방사성폐기물학회지
    • /
    • 제5권4호
    • /
    • pp.309-322
    • /
    • 2007
  • 이 논문은 사용후핵연료 차세대관리공정(ACP)에 사용되는 주요부품에 대한 방사선영향에 대하여 다룬다. 평가대상 부품으로는 중요도가 높은 것들 중에서 선택하였는데, AC 서보모터, 포텐쇼미터, 열전대, 가속도계, CCD 카메라를 그 대상으로 하였다. AC 서보모터의 경우 ACP 핫셀 내 조작기에 여러개가 사용되고 있고, 공정장치의 일부에 사용되고 있다. 포텐쇼미터는 조작기 관절의 절대 각도를 측정하기 위해 사용된다. 열전대는 금속전환장치 등의 반응기 온도 측정을 위해 사용된다. 가속도계는 탈피복시 발생하는 이상을 사전에 감지하기 위한 용도로 탈피복장치에 부착되어 있고, CCD 카메라는 조작기와 함께 공정 휴지기간에 영상 In-situ 이상감시를 하기 위한 용도로 사용된다. 다양한 방사선 중 감마선은 전기, 전자 및 로봇 부품에 가장 치명적이라고 알려져 있으므로 본 연구에서는 Co-60선원을 사용하는 감마조사시설을 이용해 방사선 영향을 평가하였다. 방사선조사결과 CCD 카메라를 제외한 다른 부품들은 방사선에 매우 강인한 특성을 보였다. 누적조사선량에 대한 각 대상 부품의 고유한 특성변화 데이터를 얻었고, 대상 부품의 성능을 보장할 수 있는 기준인 손상분기점에 대한 평가 자료를 얻을 수 있었다

  • PDF

The Role of Rice Vacuolar Invertase2 in Seed Size Control

  • Lee, Dae-Woo;Lee, Sang-Kyu;Rahman, Md Mizanor;Kim, Yu-Jin;Zhang, Dabing;Jeon, Jong-Seong
    • Molecules and Cells
    • /
    • 제42권10호
    • /
    • pp.711-720
    • /
    • 2019
  • Sink strength optimizes sucrose import, which is fundamental to support developing seed grains and increase crop yields, including those of rice (Oryza sativa). In this regard, little is known about the function of vacuolar invertase (VIN) in controlling sink strength and thereby seed size. Here, in rice we analyzed mutants of two VINs, OsVIN1 and OsVIN2, to examine their role during seed development. In a phenotypic analysis of the T-DNA insertion mutants, only the OsVIN2 mutant osvin2-1 exhibited reduced seed size and grain weight. Scanning electron microscopy analysis revealed that the small seed grains of osvin2-1 can be attributed to a reduction in spikelet size. A significant decrease in VIN activity and hexose level in the osvin2-1 spikelets interfered with spikelet growth. In addition, significant reduction in starch and increase in sucrose, which are characteristic features of reduced turnover and flux of sucrose due to impaired sink strength, were evident in the pre-storage stage of osvin2-1 developing grains. In situ hybridization analysis found that expression of OsVIN2 was predominant in the endocarp of developing grains. A genetically complemented line with a native genomic clone of OsVIN2 rescued reduced VIN activity and seed size. Two additional mutants, osvin2-2 and osvin2-3 generated by the CRISPR/Cas9 method, exhibited phenotypes similar to those of osvin2-1 in spikelet and seed size, VIN activity, and sugar metabolites. These results clearly demonstrate an important role of OsVIN2 as sink strength modulator that is critical for the maintenance of sucrose flux into developing seed grains.

틸팅차량의 곡선부 운행시 수치해석을 이용한 노반거동 평가 (Evaluation of the Roadbed Behavior During Tilting-train Operation in Curved Track Using Numerical Analysis)

  • 전상수;엄기영;김재민
    • 한국지반공학회논문집
    • /
    • 제23권6호
    • /
    • pp.115-126
    • /
    • 2007
  • 틸팅차량은 기존의 하부구조를 최대한 활용하여 효과적으로 고속서비스를 제공할 수 있다는 점에서 세계 여러 철도 운영자들의 높은 호응을 받고 있지만 기존에 운행 중인 차량과는 차량의 성능뿐 아니라 곡선부의 주행속도와 통과 메커니즘 등이 다르기 때문에 운행 및 노반의 안정성 평가가 이루어져야 한다. 본 연구에서는 틸팅차량이 궤도부 담력과 주행안정성 검토에서 산정된 허용속도로 운행할 경우 수치해석을 통하여 침하량과 지지력 측면에서 노반의 거동을 분석하였고 기후변화 및 열차의 반복하중으로 인해 연약해진 노반의 안정성 검토를 수행하였다. 수치해석 결과, 상부노반 및 원지반의 탄성계수가 장대레일의 경우 $2,300t/m^2$$3,300t/m^2$ 이상, 레일이음매의 경우 $3,800t/m^2$$4,600t/m^2$ 이상일 때 노반의 침하량은 허용침하량 값을 만족한다.

CONSTRUCTION MANAGEMENT OF TUNNELLING IN SEVERE GROUNDWATER CONDITION

  • Young Nam Lee;Dae Young Kim
    • 국제학술발표논문집
    • /
    • The 1th International Conference on Construction Engineering and Project Management
    • /
    • pp.655-661
    • /
    • 2005
  • For a hydro power plant project, the headrace tunnel having a finished diameter of 3.3m was constructed in volcanic rocks with well-developed vertical joint and high groundwater table. The intake facility was located 20.3 km upstream of the powerhouse and headrace tunnel of 20 km in length and penstock of 440 m in height connected the intake and the powerhouse. The typical caldera lake, Lake Toba set the geology at the site; the caving of the ground caused tension cracks in the vertical direction to be developed and initial stresses at the ground to be released. High groundwater table(the maximum head of 20 bar) in the area of well-connected vertical joints delayed the progress of tunnel excavation severely due to the excessive inflow of groundwater. The excavation of tunnel was made using open-shield type TBM and mucking cars on the rail. High volume of water inflow raised the water level inside tunnel to 70 cm, 17% of tunnel diameter (3.9 m) and hindered the mucking of spoil under water. To improve the productivity, several adjustments such as modification of TBM and mucking cars and increase in the number of submersible pumps were made for the excavation of severe water inflow zone. Since the ground condition encountered during excavation turned out to be much worse, it was decided to adopt PC segment lining instead of RC lining. Besides, depending on the conditions of the water inflow, rock mass condition and internal water pressure, one of the invert PC segment lining with in-situ RC lining, RC lining and steel lining was applied to meet the site specific condition. With the adoption of PC segment lining, modification of TBM and other improvement, the excavation of the tunnel under severe groundwater condition was successfully completed.

  • PDF

가토 모델에서 인체지방유래 줄기세포가 슬관절의 퇴행성 변화에 미치는 영향 (The Effects of Human Adipose Tissue-derived Stem Cells on Degenerative Change of Knee in Rabbit Model)

  • 정기환;김석권;정재우;허정;권용석;이근철
    • Archives of Plastic Surgery
    • /
    • 제35권6호
    • /
    • pp.637-644
    • /
    • 2008
  • Purpose: The survival of bone marrow derived stem cell was reported several times. But the survival of adipose tissue derived stem cells(hASCs) was not mentioned on. We studied the adipose tissue derived stem cell's survival and effect on articular cartilage in rabbits. Methods: Osteoarthritis was induced in twenty New Zealand white rabbits by intraarticular injection of monosodium iodoacetate(MIA). After four weeks, hASCs were also injected into the knee joints space without any vehicle, but the control group received phosphate buffered saline only. The histologic grade of articular cartilage was measured in 4 and 8 weeks after the transplantation of hASC and the viability of injected stem cells measured by Fluorescent in situ Hybridization (FISH) examination. Results: After 4 and 8 weeks from hASCs transplantation, histologic grade was not significantly difference between two groups(p>0.05), and the Y chromosome of the transplanted hASCs was not detected in articular cartilage. Conclusion: We found that direct injection of hASC in joint space didn't work on damaged articular cartilage repair.

골육종에서 수술 전 항암화학요법에 의한 고사 (Preoperative Chemotherapy-Induced Apoptosis in Osteosarcoma)

  • 김기수;최용수;염경성;손경선;이재혁
    • 대한골관절종양학회지
    • /
    • 제5권4호
    • /
    • pp.221-228
    • /
    • 1999
  • The purpose of this study was to verify the importance of apoptosis in genesis of osteosarcoma and whether apoptosis may play an important role as a predictive factor for the response to chemotherapy. Of the patients who were diagnosed osteosarcoma between January 1995 and June 1999, ten patients were selected. All specimens were obtained before and after preoperative chemotherapy and examined for the occurrence of apoptosis. Apoptosis was investigated by in situ end-labeling technique on paraffin-embedded sections and apoptotic indices were calculated before and after chemotherapy. The ages of ten patients ranged from 15 to 59 with equal sex ratio. All patients completed the planned pre-operative chemotherapy. Apoptosis occurs in osteosarcoma and apoptotic indices are increased after chemotherapy. Mean apoptotic index (AI) before and after chemotherapy were 17.2 (range 6-28.9) and 26.3 (9.6-46.2), respectively. Apoptotic cells were usually present around the necrotic area. The AI was increased as the progression of stage and in responder group more than in non-responder. Apoptosis is induced by pre-operative chemotherapy and the response is variable. Changes in AI levels before and after chemotherapy may possibly predict an individual patient's overall response.

  • PDF