• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.723-724
• /
• 2007

Live line work is well known for mending and maintenance of electrical power equipment. Nowadays needs of electric power supply quality require live line work In Korea, live line work is needed since 765kV transmission operation and restructure of electric power industry has changed. In other words, in case of suspension of power supply on the transmission is getting hard to keep up with efficiency of transmission operation, customer's confidence and generation-limited cost. Therefore live line work is very meaningful. As the condition of 765kV Transmission both bare hand and Helicopter live line technique must be used in moderation because of economic, geographical, environmental circumstances around steel tower.

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.994-1000
• /
• 2003

A new relative motion control methodology for a following system to an independent leading system is proposed for controlling relative position, velocity, and tension etc. It is based on maintaining minimum relative error between two independent systems. The control command of the following system to a leading system is generated by adding the current command and the output of the relative error compensation. The proposed control method is implemented on the experimental equipment which is a wire winding-unwinding system to control the tension of the line. The results show the unwinding system(follower) following the independent motion of the winding system(leader) to control the constant tension of the line in order to keep the roller dancer in reference position. The relative motion control method proposed in this paper can be applied to high precision equipment for unwinding and winding fine wire, fine fiber, and tape etc.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권5호
• /
• pp.617-624
• /
• 2010

선박 건조공정에서 외피의 곡면 가공에 많이 사용하는 가공법을 선상가열법이라고 한다. 선상가열법은 엔지니어의 숙련도에 따라 품질의 차이가 커지기 때문에 현재에는 엔지니어의 숙련도에 의존하지 않는 자동화기기를 사용하여 선상가열을 수행하는 경우가 많다. 본 연구에서는 자동화기기를 사용한 선상가열에 의한 가열판재의 온도분포를 조사하고자 한다. 선상가열시 적용되는 주요한 변수는 가열원의 이동속도, 강도 및 가열 방식 등이 있으며, 본 연구에서는 세 가지 변수를 중심으로 가열판재의 표면 및 내부온도가 어떻게 변화하는지를 조사하였다. 해석결과 가열원의 이동속도가 빨라질수록 판재의 피크온도는 낮게 형성되는 것을 확인하였고, 또한 열원의 크기에 따른 피크온도 및 온도분포가 선형적으로 변화하는 것을 정량적으로 계산할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1397-1404
• /
• 2011

Metro serves more than a basic function of transporting passengers between short distances but became a crucial part of civic culture due to the fact that citizens demand various facilities for better life style. Therefore, domestic metro cuts off train noise and air dust, provides pleasant platform surroundings by offering effective HVAC, and establishes PSD (Platform Screen Door) system to prevent falls into train tracks. To control and interlock EMU Door and PSD to avoid passenger complaint and revenue service obstructions, stability and reliability of on-board & wayside equipment are required foremost and each line needs to build optimum interface between on-board & wayside equipment. To control PSD, we would like to introduce examples of Busan Metro(BTC : Busan Transportation Corporation) which already utilizes interface between on-board & wayside equipment in various ways and consider optimum interface between on-board & wayside equipment in future PSD system.

• 대한정형외과스포츠의학회지
• /
• 제3권1호
• /
• pp.31-35
• /
• 2004

스포츠 인구의 증가와 함께 인라인 스케이트로 인한 부상의 빈도가 증가하고 있다. 이 논문의 목적은 인라인 스케이트의 종류와 기본 기술, 보호 장구 사용, 그리고 부상과 관련된 예상 인자 또는 기여 인자를 확인하는 것이다. 조정 미숙과 경험 부족이 부상의 요인이었다. 스케이트를 타는 동안 보호 장구의 사용 역시 미비 하였다. 결론적으로 안전한 교육 과정, 인라인 스케이트 타는 법과 보호 장구의 최적의 디자인과 효과가 추후 연구를 통해 규명되어야 할 것이다.

• 제어로봇시스템학회논문지
• /
• 제9권3호
• /
• pp.204-209
• /
• 2003

The line-of-sight stabilization system is an equipment which is loaded on a vehicle and stabilizes the direction of the line-of-sight of the vision sensor to obtain a not-swayed image in the existence of external disturbances. To obtain accurate Euler angles and angular velocities simultaneously we usually need a control system which uses high-price inertial sensors including Vertical Gyro(VG) or Rate Integrating Gyro(RIG). In this paper, we design and implement a control system of a gimbal, which is a line-of-sight stabilization system using a low-cost mixed algorithm of a rate gyro and an accelerometer instead of a VG and a RIG. In the experiment where we laid the implemented line-of-sight stabilization system on the rate table. we can see the stabilized performance to external disturbances.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권4호
• /
• pp.235-242
• /
• 2020

Scanogram is that combine several practical images into one image to observation. So it is an important consideration in many clinical situation such as iliac measurement, leg alignment measurement and Scoliosis. Currently, scanogram examinations are mainly conducted for children and elderly patients. In this study, in order to apply the longbone detector to children or elderly patients who are difficult to cooperate with, we compared the longbone detector from D equipment with the G equipment discovery 656 Puls equipment in reproducibility of images, distribution of irradiation dose, scattering dose, irradiation time and image acquisition time. D equipment took more than twice as much time as G equipment. The scattered dose generated about 50% more G equipment than D equipment. In the whole spine scanogram and the measurement length of the lower leg, D equipment was also measured longer than G equipment. However, both methods did not show much difference from the CT scanogram, so there was no problem in measurement. The height of the thyroid radiation dose of G equipment was produced more radiation than D equipment. However, the longbone detector deviated from the x-ray center line relative to the tube rotation method, and was measured lower by the directionality of the measuring instrument, so that the error could not be corrected. In the conclusion of study, using the longbone detector is excellent for applying to children or elderly patients to reduce scattering dose. However, using CR may be useful to normal patients. Because, the image quality may deteriorate due to an imbalance of dose difference in thickness depending on the body part. So, it is useful to using a compensation filter or tube rotation method when we take a whole spine scanogram.

• 한국환경보건학회지
• /
• 제34권2호
• /
• pp.153-160
• /
• 2008

Personal noise exposure was assessed in railroad operators working in 40 operation units including the Gyeongbu line, Honam line, and Janghang line between 2004 and 2006. 8-hour TWA were assessed based on the MOL (Ministry of Labor) guideline on noise evaluation, and 17% of these measurements exceeded 85 dBA while 70% were over 80 dBA. When the ACGIH TLV is adopted, 40% of measurements were over TLV (85 dBA). The noise exposure risk of railroad operators was higher for diesel locomotive operation and longer operational distances; in addition, the risk was higher for passenger car operation compared to freight car driving. Given that in Korea, over the past 30 years diesel locomotives have provided most of the railway's motive power and that hearing protective equipment is not likely to be used by workers during operation, railroad operators are at a high risk of noise-induced hearing loss. The result of audiometric test among 568 railroad operators showed that 32.6% of those tested had a hearing threshold shift of more than 40 dB. In conclusion, this study calls for more fundamental measures including noise control countermeasures within the operation areas, development of equipment that generates less noise and adopting limitation on the operation distance for a work shift.

• 한국조리학회지
• /
• 제13권3호
• /
• pp.263-277
• /
• 2007

In order for a cook to cook, there should be a space called a kitchen; moreover, to prepare good food, there should be good kitchen facilities in the kitchen. With good facilities, the cook can save time and have higher productivity. On the other hand, with poor facilities, equipment and utensils, the cook can get demotivated, have poor capability, suffer from high stress and possibly can cause some diseases. Therefore, better facilities are essential for cooking environment. The purpose of this study is to find out how significant the job stress is according to the demographic characteristics. Also, how kitchen facilities and moving line influence the job stress. In order to answer above questions, 278 copies of questionnaire were made and given to cooks at hotels with five star or similar ranks. Using SPSS Win 12.0 the statistics package, frequency, factor and reliability analysis were conducted. Then, regression analysis was carried out. As a result of the test, difference analysis on statistic characteristics was partly found. In addition, facilities and moving line affected job stress. Also, working area in the kitchen inversely influenced the job stress.

• 한국IT서비스학회지
• /
• 제11권4호
• /
• pp.295-308
• /
• 2012

Software and Systems Product Line(SSPL) is a paradigm that has been developed and applied by European Union(EU) to achieve the productivity and competitiveness of EU industries on the world market. It is not just a simple system or software development methodology, but a sophisticated technology requiring capabilities for a high level of mass customization, platforms, processes and convergence of software and systems. EU has applied SSPL for the five selected industrial sectors including aerospace, automobile, medical equipment, consumer electronics and telecommunication equipment since 1990s and led the way to other industry sectors to stimulate the application of SSPL from 2006. In order for Korea to secure competitiveness in the manufacturing and service industries in the competitive borderless market, it is essential to gain the high level of capabilities for software development and convergence of software and systems. SSPL can be a powerful means to achieve this end. This paper discusses the paradigmatic concept of SSPL, how EU's major industries and companies have secured competitiveness through SSPL, key capabilities that are necessary for successful institutionalization of SSPL in Korea, and finally suggestions on core strategies to materialize the benefits of SSPL for Korea.