• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.229-235
• /
• 2019

The implementation of an in-band full-duplex wireless communication system is demonstrated in this study. In the analog/RF domain, the self-interference(SI) signal is reduced using a separate antenna for the transmitter and receiver paths, and most of the SI signal is canceled in the digital domain. A software defined radio(SDR) is used to implement the in-band full-duplex wireless communication system. The USRP X310 device uses transmitting and receiving antennas. By adjusting the gain of the transmitting and receiving ends of the SDR device, the magnitude of the SI signal entering the receiving antenna, and the size of the received signal from the outside, are both set to -64 dB. To verify the in-band full-duplex wireless communication performance, the source data is image and orthogonal frequency-division multiplexing is used for modulation. A WiFi standard frame with a carrier frequency of 2.67 GHz and bandwidth of 20 MHz is used. In the received signal, the SI signal is canceled by digital signal processing and the SI signal is attenuated by up to 34 dB. OFDM demodulation was impossible when the SI signal was not removed. However, the bit error rate is reduced to $2.63{\times}10^{-5}$ when the SI signal is attenuated by 34 dB, and no error is detected in the 100 Mbit data output as a result of passing through the Viterbi decoder.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.7-17
• /
• 2015

In this paper, we propose a single antenna SSD(simultaneous single band duplex) system using turbo equalizer. The proposed system communicates simultaneously on single band. That is the proposed system is full-duplex system. The proposed system uses balanced feed network circuit to improve isolation in single antenna structure. Also, the proposed system uses RF(radio frequency) cancellation and digital cancellation to cancel self-interference. Additionally, the proposed system uses turbo equalizer to equalize ISI(inter-symbol interference) by harsh multipath fading and to collect bit errors by residual self-interference signals. By using turbo equalizer, the proposed system guarantees QoS(quality of service). In this paper, we uses Simulink simulation program to analyze performance of the proposed system. The simulation results confirm that proposed system can communicate simultaneously by using balanced feed network, RF cancellation, digital cancellation and turbo equalizer in harsh multipath channel on single band.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3131-3149
• /
• 2016

In-band Full-duplex (IBFD) wireless communication allows improved throughput for wireless networks. The current Half-duplex (HD) medium access mechanism Request to Send/Clear to Send (RTS/CTS) has been directly applied to IBFD wireless networks. However, this is only able to support a symmetric dual link, and does not provide the full advantages of IBFD. To increase network throughput in a superior way to the HD mechanism, a novel three-way handshaking access mechanism RTS/SRTS (Second Request to Send)/CTS is proposed for point to multipoint (PMP) IBFD wireless networks, which can support both symmetric dual link and asymmetric dual link communication. In this approach, IBFD wireless communication only requires one channel access for two-way simultaneous packet transmissions. We first describe the RTS/SRTS/CTS mechanism and the symmetric/asymmetric dual link transmission procedure and then provide a theoretical analysis of network throughput and delay using a Markov model. Using simulations, we demonstrate that the RTS/SRTS/CTS access mechanism shows improved performance relative to that of the RTS/CTS HD access mechanism.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.769-778
• /
• 2017

In this paper, a self-interference signal cancellation(SIC) circult for In-band Full-Duplex has been developed and tested in RF/analog region. By use of this SIC circuit, a FM two-way radio has been developed working at FRS(Family Radio Service) band. The two-way radio device is transmitting the FM modulated signal and demodulating the wanted FM signal at the same time. A circulator is used to enable a single antenna to transmit and receive simuultaenously. The receiver circuit needs to cancel out the self-interference signal due to the transmit signal. A vector modulator(VM) is used to control the phase and magnitude of the esitmated signal. And in-phase and quadrature correlators are used to figure out the optimal coefficients of the VM to remove the self-interference signal according to the change of channel environment. In this work, SA58646 has been used as the FM transceiver, and the system is tested with a frequency of 465 MHz and a bandwidth of 12.5 kHz FM signal. The output power is 17.2 dBm at the antenna port, and the self intererence signal level is measured -49.2 dBm at the receiver end. Therefore the SIC level is measured by 66.4 dB.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.101-103
• /
• 2018

최근 자원 효율성을 증대하기 위하여 차세대 유무선 통신시스템에서 동일대역 전이중 방식(in band full-duplex, FDX)을 채택하고 있다. 하지만 전이중 방식은 송수신이 동시에 이루어지기 때문에 하향신호와 상향신호가 더해져 수신된다. 따라서 원하는 신호를 수신하기 위해 자기간섭(SI: self-interference)으로 존재하는 하향 신호를 제거하는 기술이 요구된다. 본 논문에서는 주파수영역에서 자기간섭신호 제거(SIC: SI cancellation)하는 방법에 대해서 제안하고 실제 RF를 통과한 신호에 적용하여 성능을 분석한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.61-62
• /
• 2019

최근 자원 효율성을 증대하기 위하여 차세대 유무선 통신시스템에서 동일대역 전이중 방식(In-band full-duplex, FDX)을 채택하고 있다. 하지만 전이중 방식은 송수신이 동시에 이루어지기 때문에 하향신호와 상향신호가 더해져 수신된다. 따라서 원하는 신호를 수신하기 위해 자기간섭(SI: self-interference)으로 존재하는 하향 신호를 제거하는 기술이 요구된다. 본 논문에서는 DOCSIS 3.1 기반 케이블 방송시스템에서 2차 구조의 자기간섭신호 제거(SIC: SI cancellation)기술을 제안하고 실시간 성능을 분석한다.

• TTA Journal
• /
• s.155
• /
• pp.84-92
• /
• 2014

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2131-2141
• /
• 2015

In this paper, we analyze ADC effect in IBFD system. Also, we design IBFD system with ADC effect, and evaluate BER performance of the system according to power of self-interference. Firstly, we describe a fundamentals of general IBFD system. And then we calculate and analyze characteristics of desired signal before and after ADC when residual self-interference is added to desired signal after RF cancellation. In this calculation, we have confirm some conditions for selection of # of ADC bit. Finally, we design IBFD system with ADC effect, and evaluate BER performance of the system by using Simulink simulation tool. As simulation results, we have confirmed that when power of residual self-interference is high before ADC, IBFD system must use high-bit ADC for decreasing quantization step. Also, we have confirmed that quantization step should be lower than one-third of amplitude of desired signal for effective communication with good performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.2
• /
• pp.100-108
• /
• 2014

In this paper, we design SSD(simultaneous single band duplex) system using RF(radio frequency) cancellation and digital cancellation. we analyze characteristic of residual self-interference after RF Cancellation signal when error of phase shifter occur in RF cancellation. When phase shifter error of $0^{\circ}$, $0.5^{\circ}$, $1^{\circ}$ and $2^{\circ}$ occur in RF cancellation, residual self-interference signal power after RF cancellation is bigger than desired signal power of distant station. So, it is impossible to receive transmit data of distant station. but we confirm that it is possible to receive transmit data of distant station by digital cancellation with frame structure. Also, in digital cancellation with frame structure, if residual self-interference signal after RF cancellation is too large then LMS algorithm requires more time to estimate self-interference channel. That is, performance degradation occurs because self-interference channel estimation has not completed in estimation frame.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.1941-1960
• /
• 2019

Unmanned aerial vehicles (UAVs), acting as mobile base stations (BSs), can be deployed in the typical fifth-generation mobile communications (5G) scenarios for the purpose of substantially enhancing the radio coverage. Meanwhile, UAV aided underlay device-to-device (D2D) communication mode can be activated for further improving the capacity of the 5G networks. However, this UAV aided D2D communication system is more vulnerable to eavesdropping attacks, resulting in security risks. In this paper, the D2D receivers work in full-duplex (FD) mode, which improves the security of the network by enabling these legitimate users to receive their useful information and transmit jamming signal to the eavesdropper simultaneously (with the same frequency band). The security communication under the UAV coverage is evaluated, showing that the system's (security) capacity can be substantially improved by taking advantage of the flexible radio coverage of UAVs. Furthermore, the closed-form expressions for the coverage probabilities are derived, showing that the cellular users (CUs)' secure coverage probability in downlink transmission is mainly impacted by the following three factors: its communication area, the relative position with UAV, and its eavesdroppers. In addition, it is observed that the D2D users or DUs' secure coverage probability is relevant to state of the UAV. The system's secure capacity can be substantially improved by adaptively changing the UAV's position as well as coverage.