• International Journal of Fluid Machinery and Systems
• /
• 제3권3호
• /
• pp.245-252
• /
• 2010

It's known that pump head of centrifugal impeller with lager blade outlet angle is kept higher in air-water two phase flow condition, though the efficiency in water single phase flow condition is inferior. In the present study, a centrifugal impeller with variable blade outlet angles, that has higher efficiencies in both water single phase flow and air-water two phase flow conditions, is proposed. And the performances of the centrifugal impeller with variable blade outlet angles were experimentally investigated in both flow conditions of single and two-phase. In addition, effects of installing diffuser vanes on the performances of centrifugal pump with movable bladed impeller were also examined. The results are as follows: (1) The movable bladed impeller that proposed in this study is effective for higher efficiency in both water single phase and air-water two phase flow conditions. (2) When diffuser vanes are installed, the efficiency of movable bladed impeller decreases particularly at large water flow rate in water single-phase flow condition; (3) The performances of movable bladed impeller are improved by installing of diffuser vanes in air-water two-phase flow condition at relatively small water rate. The improvement by installing of diffuser vanes however disappears at large water flow rate.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권2호
• /
• pp.245-251
• /
• 2017

복부-골반 CT검사 시 피폭선량을 측정해 보고, 영상 판독에 영향을 미치지 않는 범위에서 복부와 골반의 피폭선량 최적화를 위한 프로토콜을 제시하고자 하였다. 기존 임상의 스캔 방식인 120 kVp, AEC(auto exposure control) 기법을 이용한 복부-골반을 1 phase로 스캔을 하였고, 새로 제시한 2 phase 스캔 방식은 1 phase 복부검사와 2 phase 골반검사로 각각 나누어 복부검사는 관전압 120 kVp, AEC, 골반검사는 120 kVp, 100, 150, 200, 250, 300, 350, 400 mA로 고정 관전류 기법을 이용하여 실시하였다. 스캔 시 측정된 $CTDI_{VOL}$, DLP 값을 이용해 선량값을 비교하였고, 각 스캔 영상에서 CT 감약계수와 노이즈, SNR의 평균값을 구해 영상을 평가하였다. 연구결과는 2 phase 스캔 시 1 phase 스캔 시보다 $CTDI_{VOL}$ 값은 복부에서 26%, 골반 100~250 mA에서 1.8~59.5% 감소, 300~400 mA에서 12.7~30% 증가로 유의한 차이를 보였다. 또한, DLP값은 2 phase 스캔 시 1 phase 스캔 시보다 복부에서 약 53%, 골반에서 약 41~81% 감소를 보였으나 통계적으로 유의하지 않았다. SNR은 심장주변에서 2 phase 스캔 시, 골반주변에서는 1 phase 스캔 시, 상복부와 하복부에서 1 phase 스캔 시보다 2 phase 200~250 mA 스캔 시 높게 나타났다. 또한, CT Number와 노이즈는 전반적으로 비슷한 양상을 보였지만, 골반 주변에서 노이즈가 높게 나타났다. 그러나 2 phase의 골반주변 250 mA 스캔 시 1 phase와 비슷한 노이즈값을 나타냈고 통계적으로 유의한 차이를 보이지 않았기에 통상적인 1 phase 400 mA보다 골반을 분리시켜 250 mA 스캔 시 화질에 차이 없이 피폭선량 감소효과를 볼 수 있을 것으로 본다. 그러므로 잦은 복부-골반 CT를 시행하는 환자 혹은 가임기여성, 소아의 골반은 피폭을 줄이면서 화질차이 없이 검사를 위한 2 phase 검사를 제안한다.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.94-100
• /
• 2008

This paper presents a new control method of single-phase active power filter (APF) for the compensation of harmonic current components in nonlinear loads. To facilitate the possibility of complex calculation for harmonic current detection of the single phase, a single-phase system that has two phases was constructed by including an imaginary second-phase giving time delay to the load current. The imaginary phase, which lagged the load current T/4 (Here T is the fundamental cycle) is used in the conventional method. But in this proposed method, the new signal as the second phase is delayed by the filter. Because this control method is applied to a single-phase system, an instantaneous calculation was developed by using the rotating reference frames synchronized to source-frequency rather than by applying instantaneous reactive power theory that uses the conventional fixed reference frames. The control scheme of single-phase APF for the current source with R-L loads is applied to a laboratory prototype to verify the proposed control method.

• 열처리공학회지
• /
• 제14권5호
• /
• pp.286-291
• /
• 2001

This study was carried out to investigate the influence of ${\sigma}$ phase on the microstructure and mechanical properties in super duplex stainless steel. The precipitation of ${\sigma}$ phase during isothermal heat treatment showed the type S curves with a certain incubation period. The precipitation of ${\sigma}$ phase was precipitated at ferrite phase and interface of ferrite and austenite. Under the state of isothermal transformation, the precipitation of ${\sigma}$ phase was stimulated by applied stress. With increasing of volume fraction of precipitated ${\sigma}$ phase, tensile strength was increased and elongation was decreased with linear relationship, while in case of precipitated ${\sigma}$ phase was 5% over, impact value was rapidly decreased.

• 소성∙가공
• /
• 제10권5호
• /
• pp.383-388
• /
• 2001

In describing the plastic deformation behaviour of ultrafine-grained materials, a phase mixture model in which a polycrystalline material is regarded as a mixture of a crystalline phase and a grain boundary phase has been successful. The deformation mechanism for the grain boundary phase, which is necessary for applying the phase mixture model to polycrystalline materials, is modelled as a diffusional flow of matter along the grain boundary. A constitutive equation for the boundary diffusion creep of the boundary phase was proposed, in which the strain rate is proportional to (stress/grain siz $e^{2}$). The upper limit of the stress of the boundary phase was set to equal to the strength to the amorphous phase. The proposed model can explain the strain rate and grain size dependence of the strength of the grain boundary phase. Successful applications of the model compared with published experimental data are described.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2162-2172
• /
• 2016

This paper presents a Direct Torque Control (DTC) strategy for the five-phase induction motor driven by a three-level five-phase inverter in order to improve the performance of the five-phase induction motor. In the proposed DTC technique, only 22 voltage vectors out of 243 available voltage vectors in a three-level five-phase inverter are selected and are divided in 10 sectors each with a width of $36^{\circ}$. The four different DTC combinations (DTC-I, II, III and IV) for a three-level five-phase induction motor drive are investigated for improving the performance of five-phase induction motor. All four of the DTC strategies utilize a combination of the same large and zero voltage vectors, but with different medium voltage vectors. Out of these four techniques, DTC-II gives the best performance when compared to the others. This DTC-II technique is analyzed in detail for improvements in the performance of five-phase induction motor in terms of torque ripple, x-y stator flux and Total Harmonics Distortion (THD) of the stator phase current when compared to its two-level counterparts. To verify the effectiveness of the proposed three-level five-phase DTC control strategy, a DSP based experimental system is build. Simulation and experimental results are provided in order to validate the proposed DTC technique.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.478-488
• /
• 2014

Torque pulsation mechanism and highly nonlinear magnetic characterization of switched reluctance motors(SRM) lead to unfavorable torque ripple and limit the variety of applications in industry. In this paper, a modification method proposed for torque ripple minimization of SRM based on conventional torque sharing functions(TSF) to improve maximum speed of torque ripple-free operation considering converter limitations. Due to increasing phase inductance in outgoing phase during the commutation region, reference current tracking can be deteriorated especially when the speed increased. Moreover, phase torque production in incoming phase may not be reached to the reference value near the turn-on angle in which the incremental inductance would be dramatically decreased. Torque error for outgoing phase can cause increasing the resultant motor torque while it would be negative for incoming phase and yields reducing the motor torque. In this paper, a modification method is proposed in which phase torque tracking error for each phase under the commutation added to the other phase so that the resultant torque remained in constant level. This yields to extend constant torque region and reduce peak phase current when the speed increased. Simulation and experimental results for four phase 4 KW, 8/6 SRM validate the effectiveness of the proposed scheme.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.689-693
• /
• 2009

We investigate the comparison of fault current characteristics between the separates three-phase flux-lock type superconducting fault current limiter(SFCL) and integrated three-phase flux-lock type superconducting fault current limiter(SFCL). The single-phase flux-lock type SFCL consists of two coils. The primary coil is wound in parallel to the secondary coil on an iron core and superconducting elements are connected to secondary coil in series. Superconducting elements are used by the YBCO coated conductor. The separated three-phase flux-lock type SFCL consists of single-phase flux-phase type SFCL in each phase. But the integrated three-phase flux-lock type SFCL consists of three-phase flux-reactors wound on an iron core. Flux-reactor consists of the same turn's ratio between coil 1 and coil 2 for each single phase. To compare the current limiting characteristics of the separated three-phase flux-lock type SFCL and integrated three-phase flux-lock type SFCL, the short circuit experiments are carried out fault condition such as the single line-to-ground fault. The experimental result shows that fault current limiting characteristic of the separated three-phase flux-lock type SFCL was better than integrated three-phase flux-lock type SFCL. And the integrated three-phase flux-lock type SFCL has an effect on sound phase.

• 대한간호학회지
• /
• 제17권1호
• /
• pp.24-32
• /
• 1987

This study was designed to investigate the changes of nurses' role model, perceptions toward occupation, and self actualization value in terms of the phases of socialization process. Two hundred and sixty nine nurses working in clinical settings were randomly selected from 15 general hospitals despersed over Seoul and Kyungki province. Data were gathered by the standardized Perceptual Orientation Test, the Self-actualization Test, and Questionnaires on role models and phases of socialization process developed by the investigators from October 1985 to March 1986. The data were analysed by ANOVA and Pearson's Correlation Coefficient. The results were as follows: 1. The average time period required for the shift of phases of socialization process were; phase Ⅰ, role adjustment, took average 10 months of employment: Phase Ⅱ, interpersonal adjustment, 12 months: and Phase Ⅲ, role conflict, 15 months respectively. Conflict resolution, phase Ⅳ, began to take place 18 months of employment; and shifted to phase V, internalization and self-actualization at 25 months of employment. 2. Throughout 5 consecutive phase, the number of immediate superior nurse model was dominantly the highest among the role models. The number of head nurse role model increased at phase Ⅱ, phase Ⅲ, and phase Ⅳ. Respondents with school model in phase I tended to transfer to work model at phase Ⅱ. 3. The perceptions toward occupation were not significantly influenced by the Phases of socialization process. 4. The score of self-actualization value was not significantly influenced by the phases of socialization process. 5. In regard to perceptions toward occupation, nursing director model group showed significantly lower score in phase I (p<.01). 6. The comparison of self-actualization value between the 5 phases revealed significant difference in phase I: in particular among respondents with school model at p<.05. To conclude: 1. The phase Ⅲ of socialization process is the period of role conflict which occur at 15 months of employment, an6 conflict resolution, phase Ⅳ, begins at 18 months of employment on the average in clinical settings. 2. The immediate superior nurse and the head nurse are important role models for nurses all through their socialization process.

• 정보관리학회지
• /
• 제4권2호
• /
• pp.47-61
• /
• 1987

하나의 주제가 분류표 상에서 둘 이상의 기본주제로 구성된 경우를 콜론분류법에서는 복합주제라고 하고, 이 복합주제를 구성하고 있는 각 주제 간의 관계를 불완전한 결합이라고 한다. 상이한 두 주제가 이와 같은 결합을 구성할 때 개개의 구성요소를 상이라고 하고 주제의 패싯 관계와 구분하고 있으며 3가지 수준에서 각각 6가지 종류로 규정하고 있다. DDC 나 UDC 등에서도 부분적으로는 이러한 상 관계가 도입되고 있으나, 그 관계나 수준에 대한 규정이 마련되어 있지 않으며 더우기 이들 관계의 표현방법이 제시되어 있지 않고 있다. 전통적인 체계분류법에서도 복합주제의 처리에 있어, 상 관계의 설정 및 주제구성을 위한 구체적인 방법이 더욱 확대, 도입되어야 할 것이다.