• 전기학회논문지
• /
• 제60권3호
• /
• pp.600-605
• /
• 2011

This paper shows field test and evaluation results for a wireless vehicle detector with anisotropic magneto-resistive (AMR) sensors. The detector consists of two AMR sensors and mechanical and electronic apparatuses. The AMR sensor senses disturbance of the earth magnetic field caused by a vehicle moving over the sensor and then produces an output indicative of the moving vehicle. In this paper, vehicle speeds are calculated by using two AMR sensors fixed on a board, with constant distance. To test and evaluate the accuracy of the detector in real traffic situations, the detector was installed on a local highway and vehicle speeds and volumes were measured both in a free running and a highly congested traffic. The measurements from the detector are compared with the reference measurements obtained from a traffic camera with the Mean Absolute Percentage Errors (MAPE), which has proved the usefulness of the detector in the field.

• 자동차안전학회지
• /
• 제11권2호
• /
• pp.44-52
• /
• 2019

In this study a safety evaluation method is presented for a ADAS vehicle to be tested in collision situation when multiple vehicles are present on a single lane. Test scenarios are developed based on Euro-NCAP assessment scenarios, accident database and related simulation results in previous works. An automated evaluation system that is called as the K-target mover is used for active safety evaluation experiments. The experiments are conducted with two types of tests. First, the rear-end collision tests with 25% and 50% overlap for the test vehicle and target vehicle are conducted with the two kinds of test vehicles. On the other hand, the rear-end collision tests which include multiple vehicles in a single lane with 25% and 50% overlaps, are also conducted. Experimental results show that the test vehicles with ADAS cannot recognize the collision situation sometimes in the developed test scenarios, even in the case that the test vehicle showed stable performance in the simple overlap scenarios.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.7-13
• /
• 2022

This paper presents a yaw moment control based on estimated mass for manual-shift commercial vehicles. In yaw moment controller, parameter uncertantiy of vehicle mass is important because the desired yaw moment depends on vehicle parameter. However, in the case of commercial vehicle, the weight of the loaded vehicle is more than twice as much as compared to the unloaded vehicle. The proposed algorithm estimates the vehicle mass by using the longitudinal dynamic and gear shifting characteristics. The estimated mass is used to adaptively modify the vehicle parameters. In addition, this paper estimates the chamber pressure of a pneumatic brake and generates the target yaw moment through on/off valve control. MATLAB/Simulink and Trucksim were performed under sine with dwell test. The results demonstrate that the proposed algorithm improves the lateral and rollover stability.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.70-74
• /
• 2022

This paper describes the development of a target vehicle state estimation algorithm using vehicle-to-vehicle (V2V) communication. Perceiving the state of the target vehicle has great importance for successful autonomous driving and has been studied using various sensors and methods for many years. V2V communication has advantage of not being constrained by surrounding circumstances relative to other sensors. In this paper, we adopt the V2V signal for estimating the target vehicle state. Since applying only the V2V signal is improper by its low frequency and latency, the signal is used as additional measured data to improve the estimation accuracy. We estimate the target vehicle state using Extended Kalman filter (EKF); a point mass model was utilized in process update to predict the state of next step. The process update is followed by measurement update when ego vehicle receives V2V information. The proposed study evaluated state estimation by comparing input V2V information in an experiment where the ego vehicle follows the target vehicle behind it.

• 자동차안전학회지
• /
• 제13권1호
• /
• pp.6-13
• /
• 2021

This paper presents yaw moment control for modification of steering characteristic in rear-driven vehicle with front in-wheel motors (IWMs). The proposed control algorithm is designed to modify yaw rate response of the test vehicle. General approach for modification of steering characteristic is to define the desired yaw rate and track the yaw rate. This yaw rate tracking method can cause the chattering problem because of the IWM actuator response. Large overshoot and settling time in IWM torque response can amplify the oscillation in control input and yaw rate. To resolve these problems, open-loop IWM controller for cornering agility was designed to modify the understeer gradient of the vehicle. The proposed algorithm has been investigated via the computer simulations and the vehicle tests. The performance evaluation has been conducted on dry asphalt using E-segment test vehicle. The performance of the proposed algorithm has been compared to general yaw rate tracking algorithm in the vehicle tests. It has been shown that the proposed control law improved the cornering agility without chattering problem.

• Wind and Structures
• /
• 제22권2호
• /
• pp.211-234
• /
• 2016

Super long-span bridges provide people with great convenience, but they also bring traffic safety problems caused by strong wind owing to their high decks. In this paper, the large eddy simulation together with dynamic mesh technology in computational fluid dynamics (CFD) is used to explore the mechanism of a moving vehicle's transient aerodynamic force in crosswind, the regularity and mechanism of the vehicle's aerodynamic forces when it passes through a bridge tower's wake zone in crosswind. By comparing the calculated results and those from wind tunnel tests, the reliability of the methods used in the paper is verified on a moving vehicle's aerodynamic forces in a bridge tower's wake region. A vehicle's aerodynamic force coefficient decreases sharply when it enters into the wake region, and reaches its minimum on the leeward of the bridge tower where exists a backflow region. When a vehicle moves on the outermost lane on the windward direction and just passes through the backflow region, it will suffer from negative lateral aerodynamic force and yaw moment in the bridge tower's wake zone. And the vehicle's passing ruins the original vortex structure there, resulting in that the lateral wind on the right side of the bridge tower does not change its direction but directly impact on the vehicle's windward. So when the vehicle leaves from the backflow region, it will suffer stronger aerodynamic than that borne by the vehicle when it just enters into the region. Other cases of vehicle moving on different lane and different directions were also discussed thoroughly. The results show that the vehicle's pneumatic safety performance is evidently better than that of a vehicle on the outermost lane on the windward.

• 대한산업공학회지
• /
• 제28권3호
• /
• pp.256-263
• /
• 2002

This paper addresses a planning problem in a pickup-delivery transportation' system under dynamic vehicle dispatching. We present a procedure to determine a fleet size in which stochastic characteristics of vehicle travels are considered. Statistical approach and queueing theory are applied to estimate vehicle travel time and vehicle waiting time, based on which an appropriate fleet size is determined. Simulation experiments are performed to verify the proposed procedure.

• 한국멀티미디어학회논문지
• /
• 제7권1호
• /
• pp.35-43
• /
• 2004

본 논문에서는 고속도로나 도심 진입 차량의 무인 자동과금 및 주요시설 출입 차량의 통제와 관리를 위하여 차량번호판 인식뿐만 아니라 차량 표시 문자와 제조사 식별자 검출 분류하여 차량의 정보를 판독하는 차량정보인식 및 자동과금시스템을 제안하였다. 제안한 알고리즘은 차량 후면부에서 획득된 영상으로부터 잡음제거, 세선화 등의 전처리 과정을 수행하고 템플릿 마스킹 및 레이블링 연산처리를 수행하여 차량표시문자, 제조사 표식자 및 번호판 영역을 각각 검출하였다. 또한, 검출된 특징 영역으로부터 특징자의 구조적 특징 및 패턴정보를 이용하여 표시문자와 제조사 표식자를 분류하였고, 하이브리드 패턴벡터와 세븐세그먼트 패턴벡터를 사용하여 차량번호판의 문자 및 숫자를 각각 인식하였다. 실험에서는 실제 고속도로상에서 제안한 차량인식 시스템에서 획득된 실 영상을 사용하여 인식 성능을 수행하였다. 실험 결과 제안한 알고리즘이 잡음, 외부환경, 차량의 크기에 무관하게 차량 특징자를 정확히 검출 분류하였으며 제안한 시스템은 범죄차량 단속, 차량자동과금 및 관공서 등의 차량입출력 관리의 무인화에 적용이 가능하다.

• 대한교통학회지
• /
• 제27권4호
• /
• pp.55-61
• /
• 2009

차종분류는 교통의 흐름 및 안전에 미치는 영향을 분석하고 도로의 포장 및 시설의 설계를 위하여 이루어진다. 국내에서는 국토해양부의 12종 분류에 따라 고속국도, 일반국도, 지방도의 차종분류 자료가 제공되고 있다. 기계식 차종분류를 위한 AVC(Automatic Vehicle Classification) 장비는 차량길이, 축거, 내민 거리(overhang) 등의 측정값과 미리 입력된 모든 차량 모델의 제원값을 비교하여 차종을 판단한다. 하지만, 기존의 방법은 센서의 관리상태에 분류 정확도가 크게 영향받게 된다. 본 연구에서는 실제 조사지점에서 발생하는 장비 오차와 차량 제원정보에 민감하지 않은 차종분류 알고리즘을 개발하였다. 알고리즘을 단순화하기 위하여 차량길이와 축거 중심으로 추세선을 이용하여 차종을 분류하므로 센서의 정확도 변화의 영향을 감소시켰다. 개발된 알고리즘의 평가를 위하여 일반국도에 설치된 AVC 장비에서 축수, 차량길이, 축거, 내민거리를 추출하여 비디오 판독 결과와 비교하였다. 실험 결과는 전체 차량에 대하여 88.2%의 정확도를 얻었다. 본 연구에서 개발된 차종분류 알고리즘은 센서의 감도 변화 등 현장 환경의 변화에 덜 영향을 받도록 설계되어 차종분류를 위한 기계식 장비의 안정적 정확도 유지에 활용될 수 있을 것으로 기대된다.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.16-24
• /
• 2013

Some GM (General Motors) vehicles are using a GMLAN (General Motors Local Area Network) communication protocol for control and diagnostics. The airbag control module uses vehicle speed information from the GMLAN to record the vehicle speed as pre-crash information. In order to use the vehicle speed information for crash reconstruction purposes, it helps to be able to understand the accuracy of the data. The actual vehicle speed is not expected to be the same as the GMLAN indicated speed in some situations like a spin or if there is hard braking. This paper compares the actual vehicle speed and vehicle speed information during specific vehicle maneuvers. Actual vehicle speed is calculated from a GPS sensor, while GMLAN vehicle speed is calculated from transmission output sensor by the Engine control module (ECM). Vehicle maneuvers defined as Mode #1, Mode #2, Mode #3. The Mode #1 maneuver simulates wheel lock-up and skidding f by hard-braking at a specific speed. The Mode #2 maneuver simulates a 90degree turn using a J-turn maneuver at a specific speed. The Mode#3 maneuver simulates a 180 degree turn using a spin type of maneuver at a specific speed. The study then compares the GMLAN speed and GPS speed to see what speed difference exists between them. The results of this paper are applicable to GM vehicles only. This paper catalogs the performance and limitations of two vehicles as useful reference for crash reconstructions where there is a need to understand the speed indicated in the pre-crash section of the SDM data.