• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.11
• /
• pp.1403-1412
• /
• 1997

When a high-speed railway train enters a tunnel, a compression wave is generated ahead of the train and propagates through the tunnel, compressing and accelerating the rest air in front of the wave. At the exit of the tunnel, an impulsive wave is emitted outward toward the surrounding, which causes a positive impulsive noise like a kind of sonic boom produced by a supersonic aircraft. With the advent of high-speed train, such an impulsive noise can be large enough to cause the noise problem, unless some attempts are made to alleviate its pressure levels. In the purpose of the impulsive noise reduction, the present study calculated the effect of porous walls on the compression wave propagating into a model tunnel. Two-dimensional unsteady compressible equations were differenced by using a Piecewise Linear Method. Calculation results show that the cavity/porous wall system is very effective for a compression wave with a large nonlinear effect. The porosity of 30% is most effective for the reduction of the maximum pressure gradient of the compression wave front. The present calculation results are in a good agreement with experimental ones obtained previously.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1951-1956
• /
• 2013

Distribution-matching type algorithms based on a set of symbols generated in random order provide a limited performance under biased impulsive noise since the performance criterion for the algorithms has no variables for biased signal. For the immunity against biased impulsive noise, we propose, in this paper, a modified performance criterion and derived related blind algorithms based on augmented filter structures and the distribution-matching method using a set of random symbols. From the simulation results, the proposed algorithm based on the proposed criterion yielded superior convergence performance undisturbed by the strong biased impulsive noise.

• Ocean and Polar Research
• /
• v.34 no.3
• /
• pp.287-296
• /
• 2012

In the theory of source-driven abyssal circulation, the forcing is usually assumed to be steady source (deep-water formation). In many cases, however, the deep-water formation occurs instantaneously and it is not clear whether the theory can be applied well in this case. An attempt is made to resolve this problem by using a simple reduced gravity model. The model basin has large depth change compared for its size, like the East Sea, such that isobaths nearly coincide with geostrophic contours. Deep-water is formed every year impulsively and flows into the model basin through the boundary. It is found that the circulation driven by the impulsive source is generally the same as that driven by a steady source except that the former has a seasonal fluctuation associated with unsteadiness of forcing. The magnitudes of both the annual average and seasonal fluctuations increase with the rate of deep-water formation. The problem can be approximated to that of linear diffusion of momentum with boundary flux, which well demonstrates the essential feature of abyssal circulation spun-up by periodic impulsive source. Although the model greatly idealizes the real situation, it suggests that abyssal circulation can be driven by a periodic impulsive source in the East Sea.

• Journal of Internet Computing and Services
• /
• v.17 no.2
• /
• pp.11-17
• /
• 2016

In this paper, the optimum weight of the algorithm based on the cross information-potential with the delta functions (CIPD) is derived and its robustness against impulsive noise is studied. From the analysis of the behavior of optimum weight, it is revealed that the magnitude controlling operation for input plays the main role of keeping optimum weight of CIPD stable from the impulsive noise. The simulation results show that the steady state weight of CIPD is equivalent to that of MSE criterion. Also in the simulation environment of impulsive noise, unlike the LMS algorithm based on MSE, the steady state weight of CIPD is shown to be kept stable.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.713-717
• /
• 2014

This paper presents a beamforming technique for locating impulsive sound source. The conventional frequency-domain beamformer is advantageous for localizing noise sources for a certain frequency band of concern, but the existence of many frequency components in the wide-band spectrum of impulsive noise makes the beamforming image less clear. In contrast to a frequency-domain beamformer, it has been reported that a time-domain beamformer can be better suited for transient signals. Although both frequency- and time-domain beamformers produce the same result for the beamforming power, which is defined as the RMS value of its output, we can use alternative directional estimators such as the peak value and crest factor to enhance the performance of a time-domain beamformer. In this study, the performance of three different directional estimators, the peak, crest factor and RMS output values, are investigated and compared with the incoherent interfering noise embedded in multiple microphone signals. The proposed formula is verified via experiments in an anechoic chamber using a uniformly spaced linear array. The results show that the peak estimation of beamformer output determines the location with better spatial resolution and a lower side lobe level than crest factor and RMS estimation in noise free condition, but it is possible to accurately estimate the direction of the impulsive sound source using crest factor estimation in noisy environment with stationary interfering noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.4
• /
• pp.285-301
• /
• 1988

The symbol error rate equations of multi-level quadrature PRS(QPRS) system have been derived in the individual and composite environment of Gaussian/impulsive noise, cochannel CW interference, carrier offset, phase jitter and fading. And using the derived error rate equations, the probability of error has been evaluated and shown in graphs as functions of carrier to noise power ratio, carrier to interference power ratio, phase error, impulsive index, the ration of Gaussian noise to impulsive noise power component, signal to noise power ration in phase locked loop(PLL), and fading figures. The rseults show that the error rate performances are generally more more degraded by impulsive noise than by Gaussian noise. But on the contrary the erors occurred more frequently by Gaussian noise than impulsive noise in a fading environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.3
• /
• pp.263-279
• /
• 1989

In part-1 of this paper, the error rate equations of digitally modulated signals transmitted though the Gaussian/Impulsive noise channel have been derived. Using the derived equations for the error probabilities of ASK, QAM, CPSK, DPSK, FSK and MSK signals, the error rate performances of digital modulation systems have been evaluated and represented in the figures as the functions of carrier-to-noise power ratio(CNR), impulsive index, and the ration of Gaussian noise power component to impulsive noise power component. The results are shown in graphs to known how much impulsive noise effects on digital signals than Gaussian noise.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1115-1121
• /
• 2001

In this paper, we analyzed the performance of GFSK system that presence fading effect in indoor radio communication environments and impulsive electromagnetic noise from electronic equipments then we applied the Truncated Type- II Hybrid ARQ scheme to make satisfied in data transmission service. As a result, the system was influenced by fading and impulsive electromagnetic noise. Especially, the system was much degraded by high occurrence frequency and amplitude of impulsive electromagnetic noise than fading which has direct frequency. By adopting the Truncated Type-II hybrid ARQ technique we can also obtained the performance improvement in the low signal power(20 dB) arid over 24 dB in strong impulsive electromagnetic noise environment which is occurred error floor and terribly influenced by the system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.217-224
• /
• 2007

The present work addresses an experimental study on sound attenuation characteristics of silencer by live firing test. When a gun fires, there exists excessive noise which propagates as a form of blast wave. As muzzle energy of the weapon systems increases, the level of impulsive noise also increases. It is well known that the impulsive noise from a gun gives a serious damage to human bodies and structures. The adverse effects of impulsive sound also cause both social and military problems. So it is very important to study the characteristics of the impulsive sound attenuation. The live firing test is performed to evaluate the effect of four different silencers. The test result is compared with the case of bare muzzle which is not installed the silencer. The frequency characteristics are also analyzed to investigate the diminution of sound pressure level. The results of this study will be helpful to the designing silencer for large caliber weapon systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.299-306
• /
• 2011

In this paper, a blind adaptive equalization algorithm based on PDF-distance minimization and a set of Delta functions is introduced and its superior robustness against impulsive noise and multipath characteristics of underwater communication channels is proved. The conventional CMA based on MSE has shown to be incapable of coping with impulsive noise, and correntropy blind algorithm has also revealed to yield not satisfying performance for the mission. On the other hand, the blind adaptive equalization algorithm based on PDF-distance minimization and a set of Delta functions has been proved to solve effectively the problem of impulsive noise and multipath characteristics of underwater communication channels through theoretical and simulation analysis.