• 전력전자학회논문지
• /
• 제27권4호
• /
• pp.291-296
• /
• 2022

Capacitor is one of the reliability-critical components in power converters. The lifetime of the capacitor decreases as the operating temperature increases, and power losses caused by capacitor current are the main cause of the capacitor temperature increase. Therefore, various studies are being conducted to improve the lifetime of the capacitor by reducing the current of DC-link capacitors. In this study, pulse width modulation methods proposed for improving the lifetime of DC-link capacitors of the three-level NPC inverter are comparatively analyzed. The lifetime evaluation of the DC-link capacitor under different modulation methods is performed at component level first and then system level by considering all capacitors by applying Monte Carlo simulation. Furthermore, their effects on the efficiency and THD of the output current are also considered.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1090-1094
• /
• 2011

The major goal of nuclear power industries during past 10 years has been increasing reliability and utility capacity factor. But as capacity factors crept upward, it became harder and harder to attain next percentage of improvement. Therefore, other innovative technologies and method are required. The monitoring, diagnostic and prognostic technologies have been applied to the fossil power plants and contributed a lot on improving their reliability and performance. However nuclear industries are still reluctant to apply the technology by several reasons. In this paper, current preventive maintenance status of nuclear power plants and industrial practice of monitoring, diagnostic and prognostic technologies are investigated. In addition, the restriction in the implementation of the technologies to the nuclear power plants are defined. Finally, we suggest appropriate methods of implementing the technology to nuclear industries for improving current reliability and performance.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.641-650
• /
• 2018

Purpose: This article provides a cause of breakage and a method for improving reliability of the headlight system installed in the main battle tank K2. Method: The natural frequency of the headlight system is estimated by using the finite element method. In addition, the allowable stress level under the severe conditions is provided through vibration test of a single item and a system level. Results: Based on the finite element analysis and the vibration test in the frequency domain, the lamp of the left headlight system fails by the resonance effect. Conclusion: For improving the reliability of the headlight system, the thickness of protector frame is increased to avoid the resonance effect.

• 보건교육건강증진학회지
• /
• 제23권2호
• /
• pp.47-61
• /
• 2006

Object: This research has been conducted in order to conduct obesity prevention education providing feedback which is currently taught to the second grade students of middle school, understanding how this method of education affects the knowledge and of behavior towards obesity prevention, and that could be actually applied to classrooms. Method: A questionnaire was supplemented questionnaire whose content validity and reliability was verified in the preliminary research was used. The reliability of the research tool was Cronbach' ${\alpha}=0.70$ for obesity knowledge tool, and Cronbach' ${\alpha}=0.84$ for obesity prevention behavior tool. Result: 1) It turned out that feedback was significantly effective in improving the knowledge. 2) It turned out that the education method providing feedback was effective in improving the behavior. Conclusion: From the results of this research, it can be said that the obesity prevention education providing feedback was the most effective method in improving the obesity knowledge and prevention behavior of middle school students. Therefore, it is advisable that the obesity prevention education methods providing feedback should be developed and applied continuously.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.15-23
• /
• 2005

For reliability assessment for machine tools, failure mode analyses by two viewpoints were studied in this paper. First, this study developed the reliability data analysis program, which searches f3r optimal failure distribution like failure rate or MTBF(Mean Time Between Failure) using failure data and reliability test data of mechanical parts in the web. Moreover, this data analysis program saves both failure data or reliability data and their failure rate or MTBF for database establishment. Second, this paper conducted failure mode analysis through such performance tests as circular movement test and vibration testing for machine tools when reliability data is not available. A developed web-based analysis program shows correlations between failure mode and performance test result and also accumulates all the data. These kinds of data analysis programs and stored data furnish valuable information for improving the reliability of mechanical system.

• 마이크로전자및패키징학회지
• /
• 제27권1호
• /
• pp.55-65
• /
• 2020

반도체 패키지에서 언더필의 사용은 패키지의 응력 완화 및 습기 방지에 중요할 뿐만 아니라, 충격, 진동 시에 패키지의 신뢰성을 향상시키는 중요한 소재이다. 그러나 최근 패키지의 크기가 커지고, 매우 얇아짐에 따라서 언더필의 사용이 오히려 패키지의 신뢰성을 저하하는 현상이 발견되고 있다. 이러한 이슈를 해결하기 위하여 본 연구에서는 언더필을 대신 할 소재로서 solid epoxy를 이용한 패키지를 개발하여 신뢰성을 향상시키고자 하였다. 개발된 solid epoxy를 스마트 폰의 AP 패키지에 적용하여 열사이클링 신뢰성 시험과 수치해석을 통하여 패키지의 신뢰성을 평가하였다. 신뢰성 향상을 위한 최적의 solid epoxy 소재 및 공정 조건을 찾기 위하여 solid epoxy 의 사용 개수, PCB 패드 타입 및 solid epoxy의 물성 등, 3 개의 인자가 패키지의 신뢰성에 미치는 영향을 고찰하였다. Solid epoxy를 AP 패키지에 적용한 결과 solid epoxy가 없는 경우 보다, solid epoxy를 적용한 경우가 신뢰성이 향상되었다. 또한 solid epoxy를 패키지의 외곽 4곳에 적용한 경우 보다는 6 곳에 적용한 경우가 더 신뢰성이 좋음을 알 수 있었다. 이는 solid epoxy가 패키지의 열팽창에 따른 응력을 완화 시키는 역할을 하여 패키지의 신뢰성이 향상되었음을 의미한다. 또한 PCB 패드 타입에 대한 신뢰성을 평가한 결과 NSMD (non-solder mask defined) 패드를 사용할 경우가 SMD (solder mask defined) 패드 보다 신뢰성이 더 향상됨을 알 수 있었다. NSMD 패드의 경우 솔더와 패드가 접합하는 면적이 더 크기 때문에 구조적으로 안정하여 신뢰성 측면에서 더 유리하기 때문이다. 또한 열팽창계수가 다른 solid epoxy를 적용하여 신뢰성 평가를 한 결과, 열팽창계수가 낮은 solid epoxy를 사용한 경우가 신뢰성이 더 향상됨을 알 수 있었다.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2004년도 제3회 정기총회 및 추계학술대회
• /
• pp.36-41
• /
• 2004

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2007년도 제55회 학술발표회논문집
• /
• pp.236-245
• /
• 2007

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.297-302
• /
• 2015

Replacing a manual switch installed in a feeder for a distribution system with an automatic one increases the reliability of the electric power system. This is because the automatic switch can shorten the duration of a fault the customer experiences by splitting the faulty section faster than the manual one does. However, improving the reliability of the distribution system may increase investment costs. Here, the investment costs include automatic switch cost, replacement work cost and labor cost. For this reason, importance should be attached to the proper balance between the increase of the investment costs and the improvement of the reliability of the distribution system. This article analyzed reliability index and economics when manual switches installed in a feeder (RBTS Bus2 model) was replaced by automatic ones. In addition, it attempted to draw the optimum rate of automation of manual switches by automatic ones using the GRG optimization method, considering the current economic requirements.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권3호
• /
• pp.208-215
• /
• 2016

Purpose: ASRP for the domestic development guided missiles requires not only for the reliability evaluation of the products in storage but also for the life cycle management of the products including development prototypes and initial production items. Methods: For this purpose, it should be performed to build a performance database before and after the accelerated aging test with shelf life items including development prototypes and initial production items, based on which the lifetime prediction should also be carried out. In addition, HILS must be applied for the acceptance test with the initial and follow-up production items, and also for ASRP for the long-term storage products in order to secure systematic quality assurance. Results: The results for the life cycle reliability Improving of domestic development of guided missiles are DB building of prescription Item performance, active application of HILS, Management associated with guided missiles life cycle and to Secure technology data about the introduction of foreign guided missiles. Conclusion: Furthermore, it is demanded that DTaQ, the managing agency of ASRP, actively take part in the process to maintain reliability engagement consistency over the life cycle of guided missiles.