• 한국방재학회지
• /
• 제5권3호
• /
• pp.78-84
• /
• 2005

• 교육시설
• /
• 제17권2호
• /
• pp.37-38
• /
• 2010

• 한국CDE학회논문집
• /
• 제13권3호
• /
• pp.235-242
• /
• 2008

This paper proposes a method for improving the process plan quality by use of dimensional tolerances. Dimensioning and tolerancing plays a key role in manufacturing process plan because the final part must ensure conformance with the dimensions and tolerances in its drawing. As a first step for the improvement of process plan quality, two resultant tolerances in design and process plan should be compared each other, and so a tolerance chart is used for acquisition and comparison of the two tolerances. In addition to two kinds of design and manufacturing tolerances, operational sequences or paths for the resultant dimension and tolerance are additionally recognized for measuring the quality of process plan quantitatively. Rooted tree is applied to find the related paths for the manufacturing resultant tolerances. A quality coefficient is defined by the components of two tolerances and their relations, the paths related to manufacturing resultant tolerances and the difficulty of an operation. In order to improve the quality of manufacturing process plan, the paths that two kinds of tolerances are the same or different in the rooted tree are recognized respectively and a method for tolerance rearrangement is developed. A procedure for improving the quality is suggested by combining the coefficient and the tolerance rearrangement method. A case study is applied to illustrate the efficiency of improvement method.

• 한국학교수학회논문집
• /
• 제1권1호
• /
• pp.165-174
• /
• 1998

This is the study on a teaching method for improving problem-solving ability in mathematics. If this method is performed step by step in solving problems, learners can approach problems in a variety of ways. This step-by-step teaching method will create some changes among learners. The purpose of this experiment was to determine what effects resulted from this method, especially which effects arose in the affective areas of learning math. For the experiment, learning materials were divided into 73 parts. And the subjects, who are low-leveled and have negative attitudes towards mathematics, were divided into two groups. One group was exposed to this method for four months (treatment group), and the other group(control group) was not. According to the result, though there were few changes, the treatment group came to be more interested in math than before and also negative attitudes towards math were reduced gradually, as compared with the control group. In this study, three factors were investigated: interest in math, attitudes toward math, and learning -achievement in math. Significant changes were found in two factors: interest in math and learning-achievement in math. No significant changes were found in the area of attitudes towards math. In conclusion, if this method is adopted and performed regularly, it is likely that the problem-solving skills will be improved and the negative attitudes towards math will be reduced.

• 한국건축시공학회지
• /
• 제10권5호
• /
• pp.103-111
• /
• 2010

본 연구는 현행 옥상 방수공법이 가지고 있는 문제점과 그 원인을 분석 파악하고, 이에 따른 대체 공법을 제안함으로써 옥상 방수공법 발전에 기여하는데 있다. 이와 같은 측면에서 본 연구에서는 설계 및 시공상의 누수에 따른 문제점 분석을 통해 이를 저감시키고, 시공 품질향상, 노동력의 절감, 공기단축, 환경문제 개선 등 기존 방수공법의 문제점을 보완한 친환경적 복합방수공법을 개발하고 기존공법과의 분야별 성능 비교 분석 및 현장적용 시공성능 평가를 실시하여 방수공법 특성과 결론을 도출하였다.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.102-107
• /
• 2019

This paper proposes a method to improve the mass spectral detection performance of the residual gas analyzer. By improving the mode estimation method for setting the threshold value and improving the additive noise elimination method, it is possible to detect mass spectrums having low peak values of the threshold level difficult to distinguish from noise. Ion signal blocks for each mass index with noise removed by the improved method are effective for eliminating invalid ion signals based on the linear and quadratic fittings. The mass spectrum can be obtained from the quadratic fitted curves for the reconstructed ion signal block using only the valid ion signals. In addition, the resolution of the mass spectrum can be improved by correcting the error caused by the shift of the spectral peak position. To verify the performance of the proposed method, computer simulations were performed using real ion signals obtained from the residual gas analysis system under development. The simulation results show that the proposed method is valid.

• 한국음향학회지
• /
• 제43권2호
• /
• pp.145-151
• /
• 2024

함정 선체부착형 수동소나체계는 최근 표적탐지성능을 향상시키고자 함내 진동유기 소음을 제거하려는 연구가 활발히 진행중이다. 본 연구진은 신호처리의 관점에서 음향센서와 진동센서가 설치된 복합센서를 이용한 음향-진동 정합기법을 개선책으로 제시한다. 본 논문에서는 정합기법의 이론적 배경에 대해 기술한 후, 그것이 다중물리 유한 요소해석 상에서 실현됨을 보였다. 나아가 정합기법을 센서 시스템에 적용할 시의 표적신호 수신감도 상승 및 진동유기 소음 제거 성능을 산출하였으며, 정합기법의 실용성과 향후 연구방향에 대해 논하였다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.145-156
• /
• 2012

These days, the application of electronic power transformers (EPTs) is expanding in place of ordinary power transformers. These transformers can transmit power via three or four wire converters. Their dynamic performance is extremely important, due to their complex structure. In this paper, a new method is proposed for improving the dynamic performance of distribution electronic power transformers (DEPT) by using sliding mode control (SMC). Hence, to express the dynamic characteristics of a system, different factors such as the voltage unbalance, voltage sag, voltage harmonics and voltage flicker in the system primary side are considered. The four controlling aims of the improvement in dynamic performance include: 1) maintaining the input currents so that they are in sinusoidal form and in phase with the input voltages so they have a unity power factor, 2) keeping the dc-link voltage within the reference amount, 3) keeping the output voltages at a fixed amount and 4) keeping the output voltages in sinusoidal and symmetrical forms. Simulation results indicate the potential and capability of the proposed method in improving DEPT behavior.

• Journal of the Korean Statistical Society
• /
• 제30권3호
• /
• pp.419-433
• /
• 2001

In this paper we introduce a method of improving efficiency of the moment estimator of Dekkers, Einmahl and de Haan(1989) for the extreme value index $\beta$. a new estimator of $\beta$ is proposed by adding the third moment ot the original moment estimator which is composed of the first two moments of the log-transformed sample data. We establish asymptotic normality of the new estimator and examine and adaptive procedure for the new estimator. The resulting adaptive estimator proves to be asymptotically better than the moment estimator particularly for $\beta$<0.

• 전기의세계
• /
• 제18권1호
• /
• pp.7-10
• /
• 1969

This paper shows theoretically the possibility of raising up the flash over voltage in suspension insulators or bushing according to the results which was gotten by previous study done by the Author. If some conducting metallic barriers are inserted into the flash over discharge path, the flash over voltage is forund to be increased condiferablly. Applying this priciple, some methods of improving flash over characteristics are discussed theoretically.