• 대한안전경영과학회지
• /
• 제12권1호
• /
• pp.199-205
• /
• 2010

The research proposes the three-factor random measurement models for estimating the precision about operator, part, tool, and various measurement environments. The combined model with crossed and nested factors is developed to analyze the approximate F test by degrees of freedom given by Satterthwaite and point estimation of precisions from expected mean square. The model developed in this paper can be extended to the three useful models according to the type of nested designs. The study also provides the three-step procedures to evaluate the measurement precisions using three indexes such as SNR(Signal-To-Noise Ratio), R&R TR(Reproducibility&Repeatability-To-Total Precision Ratio), and PTR(Precision-To-Tolerance Ratio), The procedures include the identification of resolution, the improvement of R&R reduction, and the evaluation of precision effect.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.104-111
• /
• 2009

This paper shows the behaviors of macro- and micro-structures and mechanical properties for specimen's welding region welded by FSW. according to welding conditions with 5mm thickness aluminum 5083O alloy plate. It apparently results in defect-free weld zone in case traverse speed was changed to 32 mm/min under conditions of anti-clockwise direction and tool rotation speed such as 800 and 1250 rpm with tool's pin diameter of 5 ${\Phi}mm$ and shoulder diameter of 20 ${\Phi}mm$, pin length of 4.5 mm and tilting angle of $2^{\circ}$. The ultimate stress of ${\sigma}_T=331$ MPa and the yield point of 147 MPa are obtained at the condition of the travel speed of 32 mm/min with the tool rotation speed of 1250 rpm. There is neither voids nor cracks on bended surface of $180^{\circ}$ after bending test. The improvement of toughness after impact test was found. The lower rotating and traverse speed became, the higher were yield point, maximum stress and elongation(%) with the stresses and the elongation(%) versus the traverse speed diagram. Vickers hardness for cross section of welding zone were also presented. The typical macro-structures such as dynamically recrystallized zone, thermo-mechanically affected zone and heat affected zone and the micro-structures of the transverse cross-section were also showed. However, the author found out that the region of 6mm far away from shoulder circumference was affected by friction heat comprehensively, that is, hardness softened and that part of micro-structures were re-solid-solution or recrystallized, the author also knew that there is no mechanically deformation on heat affected zone but there are the flow of plastic deformation of $45^{\circ}$ direction on thermo-mechanically affected zone and the segregation of Al-Mg on nugget. The solid solution wt(%) of parent material as compared against of friction stir welded zone was comprehensively changed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.191-196
• /
• 2005

The effects of shot peening on the fatigue strength of SK-5M steel is investigated by experiment. The shot peening process is investigated optimum peening condition by changing impeller speed and exposure time. Bending fatigue test is accomplished to investigate the effect of optimum peening condition on the fatigue characteristics. As exposure time is increased, fatigue life in high stress is increased in early stage, become the maximum from 60 to 100 seconds, and then is decreased. Observing fracture surface through SEM after fatigue test, we can see clear configuration of cracks and peening layer.

• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.185-193
• /
• 2019

In this paper, we propose the effects of programming-based TPACK educational program on the pre-service teacher's self-efficacy beliefs for technology integration. For this study, pre-service teachers who received programming education and TPACK education based on ICT were set as control group and pre-service teachers who received programming-based TPACK education as experimental group. In order to observe the change, the pre-service teachers conducted the test tool to measure the self-efficacy beliefs for technology integration before and after applying the educational program. As a result of the study, only the pre-service teachers who received the programming-based TPACK education showed significant improvement in the self-efficacy beliefs for technology integration. Furthermore, in the post-test, the experimental group showed a significantly higher difference than the control group. Through this study, it was concluded that programming-based TPACK educational program is effective in enhancing pre-service teacher's self-efficacy beliefs for technology integration.

• 한국사회복지학
• /
• 제59권1호
• /
• pp.55-85
• /
• 2007

본 연구는 학교현장의 통합교육을 지원하기 위해 지역사회의 장애아동복지시설에서 실시한 통합 프로그램의 효과를 분석하였다. 지역할당을 고려한 임의표집 방식으로 선정된 초등학교 6학급의 일반아동에 대해 실험조사설계에 따라 빈도분석, T 검증, 일원분산분석, 상관분석, 이원분산분석, 그리고 공분산분석 등과 같은 통계적 분석을 사용하였다. 이와 같은 분석결과에서 다음과 같은 결론을 얻었다. 첫째로 통합 프로그램의 개입으로 인한 일반아동의 사전태도와 태도개선 간에는 유의미한 차이가 있었다. 다음으로 성별, 통합학급의 경험 유무, 학교환경은 태도개선에 영향을 미치지 않는 것으로 나타났다. 반면 학년과 종교만 태도개선에 영향을 미치는 것으로 나타났다. 그러나 학년과 종교 변수가 공변수와 상호작용효과가 나타나지 않아 공분산분석을 한 결과에서는 학년과 종교는 모두 일반아동의 태도개선에 영향을 미치지 않은 것으로 나타났다. 따라서 일반아동의 특성변인들과 무관하게 통합 프로그램은 태도개선에 유의미한 영향을 미친 것으로 검증되었다. 이와 같이 장애아동복지시설에서 학교현장의 통합교육을 지원하기 위한 통합 프로그램은 순수한 효과가 있는 것으로 나타났다. 또한 장애아동과 일반아동 간의 통합교육을 지지하는 통합프로그램은 지역사회에 기반을 둔 사회사업실천 분야에서 사회통합의 중요한 도구가 될 수 있다는 것을 보여주고 있다. 따라서 본 연구에서는 향후 학교와 지역사회 연계를 통한 통합 프로그램의 개발과 적극적인 지원이 필요하다는 것을 제안하고 있다.

• 한국의료질향상학회지
• /
• 제6권1_2호
• /
• pp.136-149
• /
• 1999

Background : Although a number of studies are related to QA improvement, there are few studies applied various method of QA tools. This study reviewed the availability of general quality assurance(QA) tools according to ten steps in performing quality improvement activities at emergency room of a tertiary teaching hospital which has more than 1,000 beds. Methods : All patients in emergency room from 15th Oct. 1997 to 5th Sep. 1998 were surveyed. The survey data based on the patient's records of emergency room were evaluated according to length of stay, and we tried to identify problems with management of emergency room. To solve the problems, our team applied general QA tools(brainstorming, flow chart, nominal group technique, benchmarking, cause-and-effect diagram, run chart, control chart) to quality improvement activities and discussed the availability of the tools. Results : After the activities such as changes of staffing, the establishment of local area network and chest pain clinic, application of triage and so on, the percentage of patient who had stayed more than six hours was reduced from 56.0% to 46.8%. The mean number of patients per day in emergency room was increased from 49 to 62. But the reporting time for laboratory test was not changed after these activities. Conclusion : Each QA tool has unique benefit and limitation, but we can implement and evaluate the quality improvement activities more scientifically and systematically by applying these tools to practice according to QA ten steps.

• 대한물리치료과학회지
• /
• 제12권3호
• /
• pp.59-69
• /
• 2005

The purpose of this study was to investigate the effect of mental practice on the upper extremity function of the hemiplegic Patients, 8 subjects with hemiplegia patients participated in this study. They did the Mental Practice programme for twenty minute, two times a week, three weeks. The Mental practice effects was evaluated by Fugl-Meyer Assessment(FMA), Action Research Arm Test(ARA), Stroke Rehabilitation Assessment of Movement(STREAM). The data were analyzed using paired t-test. The result of this study are as follows: FMA score were significant difference test-retest(p<.05), ARA score were statistically significant improvement between test-retest(p<.05), On the STREAM, the patients had the score improved on 4 of the 10 items of the upper-extremity Scale. The result suggest that mental practice is a potentially useful method of practicing motor skills. Mental practice may be a cost-effective, non-invasive tool with wuhich patients with stroke can receive additional practice of functional skills, and realize greater outcome, than if therapy alone were used.

• Journal of Information Technology Applications and Management
• /
• 제14권4호
• /
• pp.43-59
• /
• 2007

The purpose of the study was to examine the effectiveness of Neuro Feedback training by observing the pre and post brainwave measurement results of about 50 (experimental group 25. comparative group 25) subjects who have shown psychological difficulties in studying. attention deficit, and personalities. The study took place at Neuro Feedback training Center B. in between the months of July 2006 and May 2007. The methodology involved in the study included the Coloring Analysis Program of the Brain Quotient Test. As the brain waves are adjusted by timeseries linear analysis. the brain function quotients can reflect the functional states of the brain. Through the test, three parameters relaxation, attention and concentration-were initially measured for one minute each and the lowest parameter out of the three was selected as the training mode or improvement target. The training took place two or three times a week. for about 40 to 60 minutes per session. Because the clients have come to the training center at different times. the researcher sampled the results of only those who had attended more than 30 training sessions. The tool used to measure the psychological reaction was POMS (Profile of Mood State). while the tool used to measure the emotional and attention-deficit characteristics was the Amen Clinic ADD Type questionnaire. Hypothesis testing included t-test. The result of the study showed the Theta: SMR ratio of (left)p = .013. (right) p = .019. The result also confirmed the differences of both ATQ(left) p = .011. (right)p = .030 and SQ(left) p = .017. (right) p = .022. The result confirmed of emotional p = .000. attention-deficit characteristics p = .000. The result of the study suggest Neuro Feedback technique's possibility in positively affecting the subjects' mental state and attention-deficit characteristics.

• 한국경영과학회지
• /
• 제36권4호
• /
• pp.91-107
• /
• 2011

The importance of service industries is growing as the portion of the service sector increases fast in the recent decades. This research deals with service prototyping and testing in a service laboratory. While products are generally tested through prototyping in new product development processes, services are difficult to test because of the characteristic of service, intangibility. A service laboratory, named s-Scape, is the experiment environment which has been developed to test services in virtual space for the purpose of analysis and improvement of real-world services such as hospitals and automobile show rooms. In this research, we present a service prototyping tool and language to support service test in the service laboratory. We first analyze key elements of service prototypes, and then design the service prototype diagram (SPD) and the service prototype description language (SPDL). SPD, which is a variant of the service blueprint, is a graphical tool to be used to generate SPDL. SPDL is an executable language of describing a service prototype of a real-world service in extensible markup language (XML) to experiment the service environment in virtual space. SPD reflects the control and interface of virtual reality devices, as well as key elements of service modeling. SPD represents a service process in which service providers and customers interact with each other in a service scape.

• 대한교통학회지
• /
• 제27권1호
• /
• pp.27-34
• /
• 2009

도로교통망의 시스템변화에 대한 효과분석의 일환으로 1979년 Herman이 제시한 Two-Fluid Model을 적용하여 거시적인 교통류 변화특성을 분석하였으며, 이를 통해 도로시설의 운영개선 효과를 정량적으로 확인하였다. 본 연구에서는 일반국도 3호선 의정부 전체 구간의 약 8km, 총 31개 신호교차로를 분석 대상으로 하며, TSIS CORSIM 및 Run Time Extension을 이용한 미시적 시뮬레이션 분석으로 현황 및 개선 대안에 대한 개별차량의 주행정보를 추출하였다. Two-Fluid Model의 파라메타 산출결과 현황 대비 신호제어시스템 개선 시 네트워크의 서비스 질을 의미하는 단위거리 당 평균최소통행시간(Tm)은 약 35% 감소하였으며, 네트워크 수요증가에 대한 저항성을 의미하는 파라메타 n은 약 28%의 향상된 결과를 나타내었다. 국도 축을 대상으로 하는 시뮬레이션 기반의 자료 수집으로 인해 제한된 연구결과이나 Two-Fluid Model이 신호 최적화 및 연동형 반감응제어의 적용 등 신호제어시스템 개선에 대한 우수한 거시적 효과평가 지표로 활용되어 질 수 있음을 확인하였다.