• 한국지반신소재학회논문집
• /
• 제18권4호
• /
• pp.151-165
• /
• 2019

본 연구에서는 저유동성 몰탈 채움을 통한 기존 항만 구조물의 내진성능 향상을 위해 시공 위치에 따라 4가지(자중증가, 활동력 감소 등) 보강방안을 제시하였으며, 이론적 방법 및 수치해석적 방법으로 보강 시 효과(안정성, 시공성, 경제성)를 분석하여 최적 방안을 제시하였다. 본 연구 결과 인공지진파를 적용한 동적 시간이력해석을 수행한 결과 보강 후 수평변위는 보강 전 수평변위에 비해 감소하였으나 보강 방안별 지진시 변위 억제 효과는 큰 차이가 없는 것으로 평가되었다. 강도감소법과 한계평형해석법을 적용하여 원호활동 파괴특성을 검토한 결과 수동말뚝 형태의 개량 방안이 다른 보강방법에 비해 안전성이 높은 것으로 평가되었다. 이는 보강체로 인해 활동 파괴면의 전단강도가 증가하였기 때문이다. 또한, 시공성 및 경제성을 분석한 결과 토압 저감형태(Type 02)와 수동말뚝 형태(Type 03)가 우수한 것으로 나타났다. 다만, 수동말뚝 형태의 경우, 설계법 적용 사례가 미미하고, 지반 조건에 따라 시공이 불가하거나 경제성이 급격히 저감되는 등 여러 가지 제약조건을 가지고 있어 적용시 주의가 요구된다.

• 대한물리치료과학회지
• /
• 제7권2호
• /
• pp.483-494
• /
• 2000

The purpose of this study was to contribute to quality improvement with physical therapy service and determining the factors affecting patients' satisfaction. The study subjects were ambulatory and admitted patients treated with physical therapy at B general hospital located in Taejon from July 15, 2000 to July 21. Authors developed structured questionnaire, and distributed it to each physical therapist of B general hospital. Total number of distributed questionnaire was 164, and 157 questionnaire were collected and analysed finally. Demand of physical therapy for quality improvement(QI) related to treatment time(r =0.746, P<01), treatment method(r =.664, P<.01). treatment effect(r=0.648, P<.01), equipments(r=0.620, P<.01), cleaning status(r =0.619, P<.01). Willingness to revisit and recommendation of this physical therapy room related to treatment method(r=0.489, P<.01), treatment time(r=0.469, P<.01), cleaning status(r=0.432, P<.01).

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권4호
• /
• pp.476-483
• /
• 2012

본 논문에서는 선외기에 적용되는 5HP급 전동 추진시스템의 효율 개선 방안에 대해 고찰하였다. 추진시스템의 핵심 부품인 전동기 및 프로펠러의 최적 효율 개선 모델을 제안하고 시제품 제작을 통하여 개선 모델의 특성을 검증하였다. 또한 실장착 시험을 통해 기존 추진시스템 대비 20% 이상의 효율 개선효과를 입증하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.150-158
• /
• 2017

Purpose: The RAM objective is a very important factor that has a great effect on the improvement of the operation ration during the operation maintenance and the reduction of the life cycle cost. It is used as a design criterion during the system development, and its sufficiency should be evaluated during its test evaluation. Method: This study analyzed the cases related to RAM objective setting and suggested the improvement measures. Result: The base data for RAM objective is OMS/MP, which needs to be drawn up under the supervision of the requirement military, and a high-accuracy operating availability should be set through ALDT calculation which reflects the military logistics support environment. In addition, data collection necessary for RAM objective and RAM analysis should be made by supplementing the input data of DELIIS. Conclusion: This study suggests improvement of RAM objective considering for the weapon system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.151-156
• /
• 2003

The Communication Based Train Control(CBTC) System generally used to improving existing lines in the world is efficient and stable for improvement. Also it is efficient for improvement because it does not cause any problems in operation of existing lines. We examined the mixed operation scheme for more efficient and stable improvement when improvement is implemented depending on aged equipment and the increased number of passengers in the Korean city railroad. The biggest point in the mixed operation is to implement a stable test without interfering with the operation of the existing lines. For this purpose, we deduced a method of installing the equipment, a method of testing depending on the installed equipment, and the types of mixed operation, and presented a scheme of execution of the methods depending on the mixed operation.

• International journal of advanced smart convergence
• /
• 제9권4호
• /
• pp.124-131
• /
• 2020

As users of internet-based software applications increase, functional and non-functional problems for software applications are quickly exposed to user reviews. These user reviews are an important source of information for software improvement. User review mining has become an important topic of intelligent software engineering. This study proposes a user review mining method for software improvement. User review data collected by crawling on the app review page is analyzed to check user satisfaction. It analyzes the sentiment of positive and negative that users feel with a machine learning method. And it analyzes user requirement issues through topic analysis based on structural topic modeling. The user review mining process proposed in this study conducted a case study with the a non-face-to-face video conferencing app. Software improvement through user review mining contributes to the user lock-in effect and extending the life cycle of the software. The results of this study will contribute to providing insight on improvement not only for developers, but also for service operators and marketing.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2333-2337
• /
• 2007

The practical studies on the method of particle contamination control for yield enhancement in the cleanroom were carried out. The method of the contamination control was considered, which is composed of data collection, data analysis, improvement action, verification, and implement control. The composition analysis for data collection and data analysis was used in the cellular phone module packaging lines. And this method was evaluated by the variation of yield loss between before and after improvement action. In case that the composition analysis was applied, the critical sources were selected and yield loss reduction through improvement actions was also investigated. From these results, it is concluded that the composition analysis is effective solutions for particle contamination control in the cleanroom.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.541-544
• /
• 2004

This paper presents a new circuit panitioning algorithm using wire redundancy removal. This algorithm consist of the two steps. In the first step. We propose a new IIP(Iterative Improvement Partitioning) technique that selects the method to choice cells according to improvement status using two kinds of bucket structures, the one kept by total gain, and the other by updated gain. In the second step, we select the target wire in the cut-set. We add a alternative wire in the circuit to remove the target wire. For this we use wire redundancy removal and addition method The experimental results on MCNC benchmark circuits show improvement up to $41-50\%$ in cut-size over previous algorithms

• 수산해양기술연구
• /
• 제26권4호
• /
• pp.341-352
• /
• 1990

The purpose of this research is to develop the design/control method that can be used for the improvement of harbour tranquility and water quality of fishing ports. For this end, firstly, the hydraulic environmental characteristics of fishing ports in the coastal waters of the Korean Peninsula are analysed and discussed combined with disasters of facilities and vessels in the ports. Secondly the problems of water quality control is pointed out considered with the improvement measures of harbour tranquility such as the methods of lengthen of main breakwaters and construction of wave absorbing structures. Finally, the control characteristics of composite functions of water quality and tranquility of fishing port are discussed and the improved control method si proposed using the experimental results for the various measures. The proposed measure is proved to be a applicable method to improve these two main functions on the design of fishing port.

• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.193-201
• /
• 2003

The problem of brake judder is typically caused by defects of quality manufacturing. DFSS (Design for six sigma) is a design process for quality improvement. DFSS will result in more improved but less expensive quality products. This paper presents an implementation of DFSS for quality improvement of the brake judder of heavy-duty trucks. Carrying out 5 steps of DFSS, the major reasons for defects of quality are found. The numerical approximation of the brake system is derived by means of the response surface method. Its quality for brake judder is improved by using the sigma based robust design methodology. Results are compared between the conventional deterministic optimal design and the proposed sigma based robust design. The proposed one shows that manufacturing cost may increase as the quality level increase. The proposed one, however, is more economical in aspect of the overall cost since the probability of failure dramatically goes down.