• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.43-53
• /
• 2017

Increasing the operation cycle length can be an important goal in the fuel reload design of a nuclear reactor core. In this research paper, a new optimization approach, electromagnetism mechanism (EM), is applied to the fuel arrangement design of the Bushehr WWER-1000 core. For this purpose, a neutronic solver has been developed for calculating the required parameters during the reload cycle of the reactor. In this package, two modules have been linked, including PARCS v2.7 and WIMS-5B codes, integrated in a solver for using in the fuel arrangement optimization operation. The first results of the prepared package, along with the cycle for the original pattern of Bushehr WWER-1000, are compared and verified according to the Final Safety Analysis Report and then the results of exploited EM linked with Purdue Advanced Reactor Core Simulator (PARCS) and Winfrith Improved Multigroup Scheme (WIMS) codes are reported for the loading pattern optimization. Totally, the numerical results of our loading pattern optimization indicate the power of the EM for this problem and also show the effective improvement of desired parameters for the gained semi-optimized core pattern in comparison to the designer scheme.

• 패션비즈니스
• /
• 제27권6호
• /
• pp.37-46
• /
• 2023

This study aims to develop workwear prototypes by applying a systematic approach considering the characteristics of workwear. A case study was conducted before this study to derive workwear's four characteristics: 'Ergonomic Pattern-Making, Certified Fabric, Specialized Color, and Customized Details.' a prior study proposed the integrated framework combining these characteristics with the FEA model. The new framework identified that these characteristics are considered in terms of functionality, expression, and aesthetics; it can increase workers' satisfaction and meet the market demand without concentrating on only particular aspects. Before prototype production, the requirements for each characteristic of workwear were analyzed through theoretical research of previously published related papers. The study primarily gathered workwear requirements data and sources from consumer satisfaction surveys and investigations into the wearing conditions of work clothes. When considering all aspects of pattern-making, fabric, color, and detail in functionality, 'comfort movement, body protection, improved work efficiency' were identified as necessary. Expressive requirements were fundamental, including 'reflecting the wearer's preferences, expressing a sense of belonging and identity. It was clear that incorporating design elements and applying current trends to the aesthetic requirements of work clothes was necessary. Four prototypes comprised two top and bottom sets and two overalls using these requirements. The framework was used throughout the entire process of planning, producing, and evaluating prototypes, and through this, the results fulfilled the requirements. This study is significant because it produced workwear prototypes using an integrated approach that considered functional, expressive, and aesthetic aspects.

• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.255-265
• /
• 2014

This study developed and proposed a pattern that can fit the body and compensate for the defects of the body type by applying shoulder princess line to the torso pattern and including formative characteristics of each object on the study of body shape's change in 40-59 year old middle aged women. The results of this study are as follows; First, according to the analysis of 'Size Korea 2010' such as average, standard deviation, minimum value, and maximum value of 48 items, women showed increase in most of the items except height as they became aged. Second, factor analysis was made to understand the shape component factors of middle aged women and to use them for the body type classification. Third, cluster analysis was made according to the shape of front and sides which should be considered in pattern production based on the factor analysis results, and the body type with the measurement values most similar to the average of direct measurement of 'Size Korea 2010' was set as standard. Fourth, in designing torso patterns through the $1^{st}$ and the $2^{nd}$ wearing experiments according to the body type, body shapes such as Chest Circumference, Waist Circumference, Hip Circumference, and Waist Back Length were considered in pattern design, goodness-of-fit was enhanced with difference in margin according to body type and different margins in front and back, and fitting satisfaction was improved by applying princess line.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.571-572
• /
• 2006

RTP (rapid thermal pressing), one of micro-pattern replication techniques like hot embossing, is focused on achieving shorter cycle time. DFSS(Design for Six Sigma) has been applied in order to enhance the completeness of the development process for RTP system. According to DIDOV roadmap, we derived design concepts and subsequently decided the main performances, design factors, and components for RTP system. In the design process of RTP system using finite element analysis, it was realized that its structural characteristics affect large area replicability. Optimizing structural design factors, based on CAE, it was checked out that its large area replicability could be improved in a virtual test. Finally, we have a plan to validate the large area replicability of the developed RTP system, by performing micro-pattern replication tests with polymeric sheets.

• 한국의류학회지
• /
• 제25권4호
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• 융합정보논문지
• /
• 제12권1호
• /
• pp.1-6
• /
• 2022

증강현실 기술이 보편화됨에 따라 마커 기반형 AR 콘텐츠들이 다양하게 적용되고 있지만, 마커 인식이 정상적으로 이루어지지 않아 콘텐츠 활용성이 저하되는 문제점이 있다. 본 논문은 증강현실 마커 이미지의 인식률을 높이고자, 이미지 보정 및 디자인 변화를 적용하였을 경우 마커의 인식률이 어느 정도 향상될 수 있는지를 실험을 통하여 분석하였다. 실험결과 이미지 보정 과정에서는 원본 마커 이미지의 대비, 채도값을 높였을 때 특징점이 더 많이 판별되었으며, 인식등급 또한 향상된 것을 확인할 수 있었다. 게다가 원본 마커 이미지에 규칙적인 패턴 디자인을 추가하였을 때에도 인식률이 향상된 것을 알 수 있었다. 결론적으로 마커 이미지를 제작하는 과정에서 이미지의 적절한 보정 및 패턴 디자인의 추가과정을 통하여 마커가 잘 인식되도록 할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1284-1287
• /
• 2002

A fast algorithm for a circular pattern recognition from a binary edge image is proposed in this paper. The implementation of this algorithm onto an FPGA is designed using Verilog-HDL where a target device is Altera EPF10K100ARC240-3. For a 256 ${\times}$ 256-pixe1 binary edge image assuming a real watermelon in a greenhouse, improved circuit performance of the proposed design was confirmed.

• 한국의류산업학회지
• /
• 제8권2호
• /
• pp.196-202
• /
• 2006

In this study the swimwear pattern focused on a typical middle-aged women's body was developed and discussed. To determine the characteristics of a typical middle-aged women's body, their actual bust were cast. According to a generated flattened body surface shell, the right side of pattern was designed considering stretching ratio of swimwear materials as shown in the figure 3. Special features of the developed swimwear pattern are a bust dart, a particularly designed lining, a power-net, and a brassiere-cup. Against a commercial swimwear pattern, the darts were applied to bust area considering its volume. The lining was attached on the entire right side except brassiere part, and power-net was added twice on belly and hip part. As a result, silhouette and body shape were improved. The new brassiere-cup was designed and made to satisfy the middle-aged women's demand about their bust volume. Swimwear fitting test was performed, and it was evaluated. The developed swimwear rated activity, body support, entire silhouette, pressure, comfortable fitting, suitability with body figure, nudity higher by comparison with a commercial swimwear, as shown in the Table 6. Specially the developed swimwear satisfied future customers about a bust, a hip, a waist, a belly area, which the middle-aged women are not confident. Reducing exposure of an armhole and upper leg area, it also satisfied them. New developed swimwear pattern will provide useful reference to swimwear businesses targeting middle-aged women.

• Tribology and Lubricants
• /
• 제38권6호
• /
• pp.261-266
• /
• 2022

Notably, laser surface patterning facilitates tribological applications under lubricated sliding contacts. Consequently, a special pattern that can reduce the coefficient of friction under contact is considered necessary for improved machine efficiency. However, inappropriate pattern designs produce higher friction coefficients and cannot reduce friction. In this study, we use cast iron pins as specimens to investigate their friction and wear characteristics. Moreover, we experimentally investigate the correlation between the friction reduction effect and the design of groove crosshatch patterns fabricated with various angles and widths. We conduct a friction test using a pin-on-disc type tribometer under grease lubrication to study the friction reduction effect of the specimens, and we observe that the average coefficient of friction changes with the crosshatch angle and width. The experiment reveals that grooved crosshatch specimens with a crosshatch angle of 135°maximize friction reduction. The coefficient of friction of the groove specimens with a width of 120 ㎛ is lower than that of the specimens with a width of 200?. The friction reduction effect of the width of the groove is attributed to the density of the groove pattern. Thus, grooved crosshatch patterns can be designed to maximize friction reduction, and the friction property of a grooved crosshatch pattern is found to be related to its width and angle.

• 한국레이저가공학회지
• /
• 제10권1호
• /
• pp.29-34
• /
• 2007

We propose a novel application of laser engraving to patterning of light guide panel (LGP) for backlight. The feasibility of three-dimensional engraved pattern in the LGP was verified by measuring brightness and uniformity. To improve the overall uniformity, we have modified proposed patterns and found improved design for patterns. The tailoring of pattern by using laser engraving method could endow the controllability of uniformity. The proposed LGPs are more efficient in both average brightness and uniformity of illumination than the conventional LGPs which have surface pattern on the panel.