• Structural Engineering and Mechanics
• /
• 제13권5호
• /
• pp.491-504
• /
• 2002

Recently we formulated a 2D hybrid stress element from the 3D Hellinger-Reissner principle for the analysis of thick bodies that are symmetric to the thickness direction. Polynomials have typically been used for all the displacement and stress fields. Although the element predicted the dominant stress and all displacement fields accurately, its prediction of the out-of-plane shear stresses was affected by the very high order terms used in the polynomials. This paper describes an improved formulation of the 2D element using Fourier series expansion for the out-of-plane displacement and stress fields. Numerical results illustrate that its predictions have markedly improved.

• 전자공학회논문지B
• /
• 제30B권4호
• /
• pp.67-75
• /
• 1993

The Fourier series are employed to approximate the input/output(I/O) characteristics of a dynamic system and, based on the approximation, a new learing control algorithm is proposed in order to find iteratively the control input for tracking a desired trajectory. The use of the Fourier approximation of I/O renders at least a couple of useful consequences: the frequency characteristics of the system can be used in the controller design and the reconstruction of the system states is not required. The convergence condition of the proposed algorithm is provided and the existence and uniqueness of the desired control input is discussed. The effectiveness of the proposed algorithm is illustrated by computer simulation for a robot trajectory tracking. It is shown that, by adding feedback term in learning control algorithm, robustness and convergence speed can be improved.

• 전력전자학회논문지
• /
• 제26권1호
• /
• pp.32-37
• /
• 2021

This study proposes a DC series arc fault detector using a frequency analysis method called the discrete wavelet transform (DWT), in which the processing speed of the DWT algorithm is improved effectively. The processing time can be shortened because of the time characteristic of the DWT result. The performance of the developed DC series arc fault detector for a large photovoltaic system is verified with various DC series arc generation conditions. Successful DC series arc detection and improved calculation time were both demonstrated through the measured actual arc experimental result.

• 한국수자원학회논문집
• /
• 제38권6호
• /
• pp.439-448
• /
• 2005

본 논문은 수문시계열에서 나타나는 주기성 및 경향성 등을 평가하기 위한 방법으로 Fourier Transform을 개선한 Wavelet Transform방법을 제시하고 이에 대한 타당성 및 적용성을 월강수량 및 연강수량 자료와 대표적인 기상인자인 남방진동지수(SOI)와 해수면온도(SST)를 대상으로 평가해 보았다. Fourier Transform은 시간적인 특성을 파악하지 못하는 반면에 Wavelet Transform은 수문시계열이 갖는 시간적인 특성을 유지하면서 빈도에 대한 스펙트럼을 보다 효율적으로 평가할 수 있었다. Wavelet Transform을 이용하여 분석한 결과 국내 월강수량은 1년을 중심으로 강한 스펙트럼을 나타내고 있으며 연강수량은 2-8년 주기에서 통계적으로 유의한 주기를 확인할 수 있었다. SOI와 SST에서는 2-8년 주기가 지배적임을 확인할 수 있었다.

• 한국전자통신학회논문지
• /
• 제18권5호
• /
• pp.965-970
• /
• 2023

윈드프로파일러와 윈드라이다는 대기경계층에서 시공간 고해상도 바람의 연직분포를 산출한다. 윈드라이다는 DBS(Doppler Beam Swinging)와 VAD(Velocity Azimuth Display) 방법으로 바람 벡터를 산출한다. DBS 방법은 빠른 스캔 시간으로 바람 프로파일을 획득할 수 있다는 장점이 있다. 반면에 연직 빔을 포함한 최소한 두 빔이 필요한 제약이 있어서 자료 수집률 저하의 원인이 된다. 일반적으로 다섯 빔을 사용하는 윈드프로파일러의 자료 수집률을 향상하기 위해 VAD 방식을 개선하였다. 먼저 DBS 방식의 시선속도 자료로 Fourier series를 산출하였다. 방위각 간격을 결정하여 Fourier series로 계산한 시선속도를 VAD 방식에 적용하여 고도별 바람을 산출하였다. DBS 방식으로 바람을 산출하지 못한 고도에서도 바람 벡터를 산출하였고, 두 방식의 결과가 일치하였다.

• 한국수학사학회지
• /
• 제15권3호
• /
• pp.59-64
• /
• 2002

This paper investigates a history of Fourier Series for the heat equation and how deeply it is related to modern famous three equations, Navier-Stokes equations in fluid dynamics, drift-diffusion equations in semiconductor, and Black-Scholes equation in finance. We also propose improved models for the heat equation with finite propagation speeds.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.908-913
• /
• 2002

An analytical study is presented on the hydroelastic vibration of two rectangular identical plates coupled with a bounded fluid by using the finite Fourier series expansion method. It is observed that the two contrastive modes, the so called the out-of-phase and in-phase modes appear. The proposed analytical method is verified by observing a good agreement to three dimensional finite element analysis results. All natural frequency of the in-phase modes can be predicted well by the combination of the dry beam modes. The theoretical prediction for the out-of-phase mode can be improved by using the polynomial functions satisfying the plate boundary conditions and fluid volume conservation instead of using dry beam modes.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.165-171
• /
• 2018

Fourier ptychographic microscopy (FPM) is a recently proposed computational imaging method that achieves both high resolution (HR) and wide field of view. In the FPM framework, a series of low-resolution (LR) images at different illumination angles is used for high-resolution image reconstruction. On the basis of previous research, image noise can significantly degrade the FPM reconstruction result. Since the captured LR images contain a lot of dark-field images with low signal-to-noise ratio, it is very important to apply a noise-reduction process to the FPM raw dataset. However, the thresholding method commonly used for the FPM data preprocessing cannot separate signals from background noise effectively. In this work, we propose an improved thresholding method that provides a reliable background-noise threshold for noise reduction. Experimental results show that the proposed method is more efficient and robust than the conventional thresholding method.

• 한국항행학회논문지
• /
• 제18권1호
• /
• pp.78-83
• /
• 2014

본 논문에서는 2개 유전체층 위의 완전도체띠 격자구조에 의한 TM (transverse magnetic)산란의 급속한 수렴 해에 대한 문제를 수치해석 방법인 FGMM (Fourier Galerkin moment method)를 이용하여 해석하였다. TM 산란에 대하여 유도되는 표면 전류밀도는 스트립 양 끝에서 매우 큰 값이 예측되므로, 이때 스트립에 유도되는 전류밀도는 적절한 모서리 경계조건을 만족하는 함수와 1종 Chebyshev 다항식의 곱의 급수로 전개하였다. 도체띠에 유도되는 전류밀도, 정규화된 반사전력 및 투과전력을 계산하였다. 제안된 함수를 사용한 수치결과는 기존의 지수함수를 사용했을 때 보다 빠르게 수렴도가 향상되었으며, 수치결과들은 기존 논문들의 결과들과 비교하여 거의 일치하였다.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.59-66
• /
• 2014

PURPOSES : This study is to predict the Sound Pressure Level(SPL) obtained from the Noble Close ProXimity(NCPX) method by using the Extended Kalman Filter Algorithm employing the taylor series and Linear Regression Analysis based on the least square method. The objective of utilizing EKF Algorithm is to consider stochastically the effect of error because the Regression analysis is not the method for the statical approach. METHODS : For measuring the friction noise between the surface and vehicle's tire, NCPX method was used. With NCPX method, SPL can be obtained using the frequency analysis such as Discrete Fourier Transform(DFT), Fast Fourier Transform(FFT) and Constant Percentage Bandwidth(CPB) Analysis. In this research, CPB analysis was only conducted for deriving A-weighted SPL from the sound power level in terms of frequencies. EKF Algorithm and Regression analysis were performed for estimating the SPL regarding the vehicle velocities. RESULTS : The study has shown that the results related to the coefficient of determination and RMSE from EKF Algorithm have been improved by comparing to Regression analysis. CONCLUSIONS : The more the vehicle is fast, the more the SPL must be high. But in the results of EKF Algorithm, SPLs are irregular. The reason of that is the EKF algorithm can be reflected by the error covariance from the measurements.