• The Korean Journal of Cytopathology
• /
• 제3권2호
• /
• pp.82-89
• /
• 1992

Electron microscopy (EM) can provide a valuable contribution to light microscopy (LM) In the Interpretation of fine needle aspiration cytology (FNAC) specimen, especially in the diagnosis of the tumor. However, considerable care in processing the specimen is mandatory to recover the cells and avoid altering the fine structures. We experienced a case of malignant melanoma in 33-yrs-old female, diagnosed by EM study of FNAC specimen from the axillary mass, who was initially thought as disseminated carcinomatosis on LM study. The technique of EM study on FNAC specimen consisted of washing the needle and syringe in 2.5% glutaraldehyde after a rapid stain (Diff-Quik), which was used to obtain a preliminary diagnostic impression and to assure the adequacy of the EM specimen. After centrifugation in the steps of fixation and dehydration, the sediment was made into an epon block and examined. The whole processing time of EM study can be shortened within 7 or 8 hours, and results can be available within 48 to 72 hours. Our experience suggests the EM study on FNAC can be a useful diagnostic method in the diagnosis of difficult FNAC cases.

• Earthquakes and Structures
• /
• 제3권1호
• /
• pp.17-35
• /
• 2012

Simplified equations for fundamental period of vibration of skeletal structures provided by most seismic design provisions suffer from the absence of any associated confidence levels and of any reference to their empirical basis. Therefore, such equations may typically give a sector of designers the false impression of yielding a fairly accurate value of the period of vibration. This paper, although not addressing simplified codes equations, introduces a set of mathematical equations utilizing the theory of error propagation and First-Order Second-Moment (FOSM) techniques to determine bounds on the relative error in theoretically calculated fundamental period of vibration of skeletal structures. In a complementary step, and for verification purposes, Monte Carlo simulation technique has been also applied. The latter, despite involving larger computational effort, is expected to provide more precise estimates than FOSM methods. Studies of parametric uncertainties applied to reinforced concrete frame bents - potentially idealized as SDOF systems - are conducted demonstrating the effect of randomness and uncertainty of various relevant properties, shaping both mass and stiffness, on the variance (i.e. relative error) in the estimated period of vibration. Correlation between mass and stiffness parameters - regarded as random variables - is also thoroughly discussed. According to achieved results, a relative error in the period of vibration in the order of 19% for new designs/constructions and of about 25% for existing structures for assessment purposes - and even climbing up to about 36% in some special applications and/or circumstances - is acknowledged when adopting estimates gathered from the literature for relative errors in the relevant random input variables.

• Journal of Dental Rehabilitation and Applied Science
• /
• 제19권1호
• /
• pp.43-48
• /
• 2003

During the past several years, significant advances have occurred in the utilization of osseointegrated implants for the treatment of partially edentulous patients. One of the biggest purposes for treating of these patients is the high demand for improved esthetics, especially in the anterior region. For this esthetics, the new trend in dental implants is the immediate placement and immediate superstructure fabrication. The refined surgical technique, the skillful soft tissue management, and the proper prosthetic coordination are the main factors to achieve natural looking of implant supported prosthesis. The customized provisional restoration and the customized impression coping are recommended for the optimal peri-implant soft tissue contour. The basic concept of Frialit 2 system was the immediate replacement of a tooth with root-analog fixture after extraction. This system guarantees an ideal result in function and esthetics. The ceramic abutment system offers improved quality in the respect of esthetics, fitness, translucency, and biocompatibility. In this clinical report, the final restoration made with IPS Empress 2 crown on the CeraBase abutmen of Frialit 2 system allowed the reproduction of the natural vitality of tooth and adjacent gingiva.

• Journal of the Korean Society of Costume
• /
• 제53권5호
• /
• pp.33-48
• /
• 2003

The purpose of this study was to define the moaning and features of humor in modern fashion. by examining how it's being grafted into fashion, based on artistic expression including collage, assemblage, photo montage, graffiti, transformation, distortion, exaggeration and optical illusion. Beside. humor of fashion is to examine not only laugh and fun but also formative expression and creativity. Furthermore, it is to enlarge the range of conception for future fashion. The findings of this study could be described as below: The features of humorous fashion by collage and assemblage boiled down to unexpectedness, disharmony and creativity. The photo montage was marked by popularity, reproduction and recreativity, and graffiti was characterized by attention, simpleness, and amusement. And there were unexpectedness, creativity and strangeness in transformation, distortion, magnification and optical illusion. The meaning of humorous fashion that carries such features could eventually be summarized into the followings : First, the fashion, from which collage, assemblage, photo montage. graffiti, transformation, distortion, magnification and optical illusion were detected. could be sorted out into several categories that used different things : introduction of objects of different nature, dramatic impression and wit based on photo montage technique, introduction of comic components and infant image, and destruction of aesthetic principles. Second, the substance of humor in art could be applied to fashion design as well as visual art. Humor is a property related to accidental, unexpected incident, behavior, situation or idea, and it puts laugh, disharmony or awkwardness in fashion. Third, spicing fashion with humor could serve to draw people's attention, break down the barrier among people exposed to dry sentiment, and connect the public with art.

• Biomedical Science Letters
• /
• 제13권4호
• /
• pp.369-374
• /
• 2007

A fingerprint is an impression of the friction ridges of all or any part of the finger. A friction ridge is a raised portion of the epidermis on the palmar (palm and fingers) or plantar (sole and toes) skin, consisting of one or more connected ridge units of friction ridge skin. There are two fundamental principles underlying the use of fingerprints as a means of identifying individuals - immutability and uniqueness. Friction ridges develop on the fetus in their definitive form before birth. Ridges are persistent throughout life except for permanent scarring. Ridge patterns and the details in small areas of friction ridges are unique and never repeated. Friction ridge patterns vary within limits, which allow for classification. We developed the high temperature-moisturizing method to obtained quality postmortem impressions from decomposing friction ridge skin. This technique is a simple procedure that uses boiling water to recondition the skin. This reconditioning process enhances detail present on the fingers and exposes ridge detail not visible to the naked eye. Therefore, we can recover the quality fingerprints, even from the worst decomposed bodies.

• The Journal of the Korean dental association
• /
• 제51권11호
• /
• pp.595-603
• /
• 2013

The requirements for the successful treatment of all-ceramic restorations are not so different from the ones of conventional restorations. "The provisional restoration followed by an adequate tooth reduction and the accurately fitting prostheses with corresponding to final impression" can be the examples of them. Nevertheless, the one which all-ceramic restorations are distinguished from conventional restorations is the additional procedure of so called "bonding". In addition to the application of resin cement between "inner surface of restoration and outer surface of abutment", bonding technology can be also applied to the treatment process of "Post and Core" in particular if the abutments are non-vital teeth. Core build-up for all-ceramic crown is conducted with fiber post and tooth colored composite by considering the properties of the restorations transmitting light. We know well that a vital abutment is easier than a non-vital one to get the targeted goals for clinical success in connection with esthetics and structure. The creation of "Post and Core" with bonding technique is a decisive factor for a long-term success if the abutment is non-vital tooth with dentinal collapse. I would like to share my clinical experience about "post & core build-up and all-ceramic restoration bonding" out of several success strategies of all-ceramic crown with this presentation.

• Journal of Digital Convergence
• /
• 제10권11호
• /
• pp.635-640
• /
• 2012

A changed image that they feel through makeup manipulates impression by linking with cultural standards and will be able to direct a variety of makeup images. Makeup in modern society has been expanding into the area of prevention of diseases and health of skin due to the development of cosmetics and has beautifully changed a face into a someone else's face due to the development of makeup technique. Also, assuming that motivation of makeup act of men and women is related to sexual instincts, I tried to analyze what kind of association the gender roles and the function of makeup required by the society has with age and regional and social background. In particular, I tried to explain that makeup act of men not only represents cognitive change of gender roles that have been perceived differently in modern society but has been adopted by men for the pure purpose in a socially equitable competition.

• The Journal of Korean Society for Radiation Therapy
• /
• 제7권1호
• /
• pp.92-96
• /
• 1995

All patients who will Undergo irraidiation of the oral cavity cancer will need dental before and during Radiotherapy. The extent of the region and the presence of numerous critical normal tissues(mucosa, gingiva, teeth and the alveolar ridge, alveolar bony structure, etc) in the oral cavity area, injury to which could result in serious functional impairment. Therefore I evaluate the Usefulness of custom-made intraoral shielding device before and during Radiotherapy in oral cavity cancer. Materials and Methods(1) : Manufacture process of Custom-made intraoral shielding device Containing Cerroband. A. Acquisition of impression B. Matrix Constitution C. Separation by Separator D. Sprincle on method E. Trimming F. Spacing G. Fill with Cerroband Materials and Methods (2) A. Preannealing B. TLD Set up C. Annealing D. TLD Reading = Results = Therefore dosimetric characteristics in oral cavity by TLD Compared to isodose curve dose distribution Ipsilateral oral mucosa, Contralateral oral mucosa, alveolar ridge, tongue, dose was reduced by intraoral shielding device containning Cerroband technique Compard to isodose plan = Conclusions = The custom-made intra-oral shielding device containing Cerroband was useful in reducing the Contralateral oral mucosa dose and Volume irradiated.

• The Journal of Korean Academy of Prosthodontics
• /
• 제24권1호
• /
• pp.91-103
• /
• 1986

Using imprint cultures and epithelial smears, the density and prevalence of colonization of oral mucosal sites and denture surfaces by Candida albicans has been determined in 28 healthy dentate subjects and 20 denture wearers. With questionnaire, oral and denture examination, the relationship between the carrier rates and several factors; DMFT, oral hygiene index, salivary pH & denture plaque score were studied. But these factors have not significant relationship to the carrier rates. Imprint culture appears to be sensitive technique for detecting candidal carriers and be useful for distinguishing between the healthy carrier state and candidal infection. Cigarette smokers had a significantly increased carrier state (P<0.05) compared with nonsmoker in male dentate subjects. Female were more frequent carriers than male in dentate and denture group, but these differences were not significant. In denture wearers, there was a higher density and frequency of candidal colonization of all mucosal sites sampled, compared with that of healthy dentate group especially anterior palate and posterior palate showed highly significant differences in frequency of candidal colonization (P<0.05). The distribution of Candida albicans is not uniform throughout the mouth. The tongue in the healthy dentate subjects and the impression surfaces of upper dentures are the primary oral reservoirs for the fungus. Overnight wearing of dentures was associated with increased density and frequency of candidal colonization and density.

• Journal of Korean Dental Science
• /
• 제15권2호
• /
• pp.132-140
• /
• 2022

Purpose: Dental diagnostic records derived from study models are a popular method of obtaining reliable and vital information. Conventional plaster models are the most common method, however, they are being gradually replaced by digital impressions as technology advances. Moreover, three-dimensional dental models are becoming increasingly common in dental offices, and various methods are available for obtaining them. This study aimed to evaluate the accuracy of the measurement of dental digital models by comparing them with conventional plaster and to determine their clinical validity. Materials and Methods: The study was conducted on 16 patients' maxillary and mandibular dental models. Tooth size (TS), intercanine width (ICW), intermolar width (IMW), and Bolton analysis were taken by using a digital caliper on a plaster model obtained from each patient, while intraoral scans were manually measured using two digital analysis software. A one-way analysis of variance test was used to compare the dental measurements of the three methods. Result: No significant differences were reported between the TS, the ICW and IMW, and the Bolton analysis through the conventional and two digital groups. Conclusion: Measurements of TS, arch width, and Bolton analysis produced from digital models have shown acceptable clinical validity. No significant differences were observed between the three dental measurement techniques.