• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.398-405
• /
• 2011

Nondestructive evaluation (NDE) technique method using a resonance frequency mode was carried out for woodceramics made by different phenol resin impregnation ratios (40, 50, 60, 70%) for Broussonetia Kazinoki Sieb. Dynamic modulus of elasticity increased with increasing resin impregnation ratios. There was a close relationship between dynamic modulus of elasticity and static bending modulus of elasticity and between dynamic modulus of elasticity and MOR and between static bending modulus of elasticity and MOR. Therefore, the dynamic modulus of elasticity using resonance frequency mode is useful as a nondestructive evaluation method for predicting the MOR of woodceramics made by different impregnation ratios.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.363-365
• /
• 1999

The improved method comprises electrochemically deposition of nickel hydroxide into the sintered nickel plaque cathode from nickel aqueous electrolyte at acid pH in a treating zone containing an anode. The electrochemical impregnation was examined under various conditions. Deposition condition of fine active material was obtained from the impregnation of a high temperature and also high current density. This method also could be decreased swelling and buckling of the plaque. A nickel electrode prepared by electrochemical impregnation is useful as the positive in nickel-cadmium cells. The utilization of the active material indicated almost 100% based on a one electron charge.

• Journal of information and communication convergence engineering
• /
• 제7권1호
• /
• pp.72-77
• /
• 2009

Three different procedures for adding Pd compounds to $SnO_2$ particles have been investigated. These processes are: (1) coprecipitation; (2) dried powder impregnation; and (3) calcined powder impregnation. The microstructures of $SnO_2$ particles have been analyzed by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). In the coprecipitaion method, the process does not restrain the growth of $SnO_2$ particles and it forms huge agglomerates. In the dried powder impregnation method, the process restrains the growth of $SnO_2$ particles and the surfaces of the agglomerates have many minute pores. In the calcined powder impregnation method, the process restrains the growth of $SnO_2$ particles further and the agglomerates have a lot more minute pores. The sensitivity ($S=R_{air}/R_{gas}$) of the $SnO_2$ gas sensor made by the calcined powder impregnation process shows the highest value (S = 21.5 at 5350 ppm of $C_3H_8$) and the sensor also indicates the lowest operating temperature of around $410^{\circ}C$. It is believed that the best result is caused by the plenty of minute pores at the surface of the microstructure and by the catalyst Pd that is dispersed at the surface rather than the inside of the agglomerate. Schematic models of Pd distribution in and on the three different $SnO_2$ particles are presented.

• 한국대기환경학회지
• /
• 제20권2호
• /
• pp.185-193
• /
• 2004

A catalyst with CuO ceramic filter for simultaneous treatment of dust and HAP was prepared and characterized. Catalytic ceramic filter can not only potentially achieve the substantial savings in energy but provide with effective optimization and integration of process for simultaneous removal of SO$_2$, NO$_{x}$ and particulates from flue gases. Catalytic ceramic filters remove simultaneously particulates on exterior surface of filters and reduce NO to $N_2$ and $H_2O$ by SCR (Selective Catalytic Reduction) process. Preparation of catalyst impregnated ceramic filter with disk shape (Ψ 50) follow the processing of alumino-silicate ceramic filter, support impregnation and catalyst impregnation (copper oxide). Preparation routes of alumino-silicate catalyst carrier suitable for production of catalytic filters practically were studied and developed using the sol-gel and colloidal processing, homogeneous precipitation and impregnation method. Characterization of the catalyst, catalyst carrier catalytic filter materials have been performed the using various techniques such as BET, XRD, TGA, SEM. Combination of the sol-gel and colloidal processing and impregnation method is recommended to prepare catalyst carriers economically for catalytic filter applications.s.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.842-851
• /
• 2016

The objective of this study was to improve physical and mechanical properties of soft-inner part of oil palm trunk (S-OPT) after impregnation with phenol formaldehyde (PF) resin and densification by close system compression (CSC) method. Effect of different methods of PF resin impregnation (i.e., no vacuum-pressure, vacuum, and vacuum-pressure) was evaluated. The results showed that PF resin impregnation and CSC significantly improved the physical and mechanical properties of S-OPT up to: (1) 176% in density; (2) 309% in modulus of rupture (MOR); (3) 287% modulus of elasticity (MOE); and (4) 191% in the compressive strength. Physical and mechanical properties of S-OPT showed their best performances when PF resin impregnated with vacuum-pressure method as shown by higher weight gain, density, MOR, MOE, compressive strength, and lower recovery of set due to better penetration of PF resin into S-OPT. Combining PF resin impregnation and densification by CSC method could be a good method to improve physical and mechanical properties of S-OPT.

• 산업경영시스템학회지
• /
• 제46권spc호
• /
• pp.31-38
• /
• 2023

In this study, in order to develop a method to efficiently inject essential nutrients necessary for plant growth into wood chips, which are simply used as soil covering materials in the agriculture, landscaping and horticultural industries, the atmospheric pressure dipping method and the vacuum pressure impregnating method are used to improve the plant nutrients injectability and impregnation amount were comparatively analyzed. Nutrient ingredients and 8 major heavy metal contents of wood chips injected with nutrients were analyzed, and soil covering effects were examined by covering wood chips injected with nutrients on soil. Comparing the dipping method and the vacuum pressure impregnation method, it took about 48 hours or more to inject 1,500 g or more of the nutrient aqueous solution into 1 kg of wood chips in the dipping method, but the vacuum pressure impregnation method could be impregnated in about 5 minutes. Components of the impregnated nutrients were detected in proportion to the diluted concentration. As a result of covering the wood chips developed in this study on soil, they showed weakly acidic pH, and the heat insulation and moisturizing effects during the winter season were evaluated to be superior to those of uncovered soil. In the future, wood chips impregnated with nutrients are expected to contribute to the more efficient use of waste wood resources and the long-term supply of nutrients essential for plant growth, reducing excessive use of chemical fertilizers and reducing costs.

• Applied Microscopy
• /
• 제29권4호
• /
• pp.451-457
• /
• 1999

성충초파리의 단안을 일반적인 방법(conventional)과 오스뮴침착법(osmium impregnation)을 이용한 전자현미경적 수준에서 미세구조를 비교하였다. 오스뮴침착법에서는 세포내의 특정 소기관들이 강하게 염색되었는데, 그 중에서도 간상분체의 바로 아래에 있는 SRC가 강하게 염색되고, 복안에서와 같이 그물구조를 보이고 있었다. SSC, ER, 핵막, 색소과립 미토콘드리아 등이 강하게 오스뮴에 의해서 염색된 것이 관찰되었다. 이들 소기관들은 공통적으로 칼슘이온의 저장과 깊은 관계가 있는 것으로 알려져 있다. 결론적으로 오스뮴침착법에 의해 얻어진 강한 명암대비 및 막구조의 강조효과는 이들 칼슘저장고에 존재하는 칼슘이온과 오스뮴의 강한 결합에 의한 것으로 사료된다. 그러므로 저자들은 세포소기관들의 형태를 비교하는 데에는 오스뮴침착법이 유용한 방법이 될 것이다.

• 보존과학회지
• /
• 제6권2호
• /
• pp.126-140
• /
• 1997

과거에는 유적에서 수침목재유물이 발굴되면 적당한 보존처리 방법을 찾지못해 그대로 방치하여 유물을 심하게 손상시키는 경우도 있었다. 1975년 경주 안압지에서 발굴된 목선이 PEG함침법으로 보존처리된 이 후, 대부분의 수침목재유물은 보다 다양하고 과학적인 방법에 의하여 보존처리 되고 있다. 우리나라에서 주로 이용되고 있는 수침목재의 보존처리법은 PEG함침법과 알코올-에테르-수지법, 진공 동결건조법 등이며 근래 유럽과 일본에서 실용화된 슈크로오스와 당-알콜류를 이용한 함침강화법, 고급 알코을 등에 대한 적용방법 연구가 진행되고 있다. 수침목재 보존처리에 있어서 가장 중요한 과제는 우리나라 풍토와 환경조건에 적합하고 물성이 우수한 함침재료와 그 적용방법을 개발하는 것이다. 또 효율적인 보존처리가 이루어질 수 있도록 하기 위해서는 처리대상 유물의 재질적 특성, 함침재료의 물성, 함침과 건조 조건 간의 상호 유기적인 관계를 정확히 파악하는 것이 중요하며 이를 위해 다각적 측면에서의 실험연구가 필요하다.

• 대한약침학회지
• /
• 제21권2호
• /
• pp.112-119
• /
• 2018

Contents of compounds in Rehmanniae Radix change depending on the number of steaming and drying and the drying method. In this study, as an impregnation method for dried Rehmanniae Radix, takju impregnation and cheongju impregnation were carried out and steaming and drying were repeated for 9 times. The changes of 5-HMF and catalpol contents were analyzed according to the number of repetition times to investigate which stage of steaming and drying is preferable. Also, total nitrogen, crude fat, ash, and crude fiber were measured to analyze changes in general components. 5-HMF was not detected in dried Rehmanniae Radix. As a result of repetitive steaming and drying, the content of 5-HMF increased only slightly from 1 to 4-times steaming and drying but increased significantly from 5-times. The catalpol in dried Rehmanniae Radix was not detected after 5 times of steaming and drying. Sucrose, maltose, and glucose were included in dried Rehmanniae Radix before steaming and drying. However, after the process in both Takju impregnation and Cheongju impregnation, galactose and fructose tended to decrease after production and sucrose and glucose tended to decrease after the increase. In this study condition, 6-times and more steaming and drying were appropriate process which met the content criteria (not less than 0.1%) of the Korean Pharmacopoeia (8th edition) for 5-HMF, an index component for quality control of Rehmanniae Radix Preparata.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권5호
• /
• pp.11-18
• /
• 2012

철근콘크리트 구조물은 시간의 흐름과 환경의 변화에 의하여 노후화 및 부실화가 진행된다. 따라서 강도와 사용성이 저하되고, 결국에는 구조물 수명의 단축은 물론, 안전성도 줄어든다. 따라서 본 연구에서는 성능저하로 안전성이 떨어진 구조물의 내하력을 증진시키고, 기존 공법보다 내구성을 향상시켜서 구조물의 수명을 증가시키는 보강공법을 개발하고자 하였다. 이를 위해 보강재 양을 쉽게 조절할 수 있고 기존 콘크리트 구조물과 보강재를 일체화시킴으로서 하중재하 시에 보강재와 기존 콘크리트가 같이 거동할 수 있도록 진공함침을 이용하는 보강공법을 개발하였다. 휨 실험의 경우, 진공함침으로 2겹에 해당하는 보강, 섬유시트 2겹 보강, 진공함침으로 1겹 에 해당하는 보강, 섬유시트 1겹 보강, 무보강한 실험체의 순으로 최대강도를 보였다. 또한, 섬유보강재가 열악한 환경에 노출되었을 때의 내구성에 대한 확인결과, 모든 환경에 대한 잔류 인장강도가 90% 이상을 상회하였다. 이는 본 연구에 사용된 섬유보강재가 열악한 환경에 대해 저항성이 우수하기 때문으로 판단된다.